Description
🔧 Product Overview
The ABB PFBL141B is a 75 kN Pressductor® force/tension sensor designed for industrial force measurement applications. It belongs to the ABB Millmate force measurement product range and is used where stable and accurate measurement of mechanical force is required.
This version is supplied with a 10-meter cable, making it suitable for installations where the sensor is positioned some distance from the measurement and signal-conditioning equipment.
The PFBL141B series is commonly associated with ABB Millmate force measurement systems used in applications such as steel processing, rolling mills, paper production, and other continuous-process machinery.
⭐ Key Features
🔹 75 kN nominal measuring capacity
🔹 Pressductor® force measurement technology
🔹 10 m integrated/connected cable configuration
🔹 Designed for industrial force measurement
🔹 Suitable for Millmate force measurement systems
🔹 Low-signal measurement technology for demanding industrial environments
🔹 Robust construction for continuous production equipment
🔹 Applicable to rolling-force and tension/force measurement systems
🔹 Replacement-friendly design for existing ABB installations
📋 Technical Information
Brand: ABB
Model: PFBL141B
Rated Capacity: 75 kN
Product Type: Pressductor® Force / Tension Sensor
Product Family: Millmate Force Measurement
Cable Length: 10 m
Measurement Type: Mechanical force / rolling force measurement
Technology: Pressductor®
Application: Industrial force measurement
Typical System: ABB Millmate force measurement system
Installation: Industrial machinery / rolling equipment
Output: Sensor signal for compatible ABB measurement electronics
Condition: Please refer to the actual listing condition and product photos
⚙️ Function
The sensor converts mechanical force acting on the sensing element into an electrical measurement signal for the associated ABB measurement electronics.
In a typical Millmate installation, the sensor works together with signal-conditioning and control equipment such as ABB matching units, tension amplifiers, or related force-measurement components. The PFBL141B is therefore a sensing element rather than a standalone controller.
For replacement work, the complete model designation and force rating should be checked before installation. A 75 kN sensor should not be substituted with another capacity simply because the mechanical dimensions appear similar.
🏭 Typical Applications
Steel & Metal Processing
Used for force measurement in rolling and metal-processing equipment.
Rolling Mills
Suitable for applications where rolling force needs to be monitored as part of the process-control system.
Paper & Web Processing
Can be used in industrial force/tension measurement arrangements where compatible ABB measurement equipment is installed.
Industrial Machinery
Useful as a replacement sensor in existing ABB force-measurement installations.
🔌 Installation & Replacement Notes
- Confirm that the existing sensor is the PFBL141B 75 kN version.
- Check the complete mechanical mounting arrangement before removing the old sensor.
- Verify that the replacement has the required 10 m cable configuration.
- Record the existing cable routing and terminal connections before disconnection.
- Protect the cable from sharp edges, excessive bending, heat, and mechanical tension.
- Make sure the associated ABB measurement electronics are compatible with the PFBL141B.
- After installation, perform a zero/load verification and compare the measured value with the expected mechanical force.
⚠️ Do not connect or disconnect the sensor while the associated measurement circuit is energized unless the equipment documentation specifically permits it.
🔍 Identification Checklist
Before ordering or installing a replacement, compare:
- ABB brand marking
- PFBL141B model
- 75 kN capacity
- 10 m cable
- Connector/cable termination
- Mechanical dimensions
- Mounting arrangement
- Existing Millmate measurement system
The PFBL141B should not be confused with other ABB force sensors such as PFTL or PFCL series. Different sensor families can have different mechanical and electrical interfaces.
❓ FAQ
Q: What is the ABB PFBL141B used for?
A: It is a Pressductor® force/tension sensor used for industrial force measurement.
Q: What is the measuring capacity of this version?
A: This model is identified as the 75 kN version.
Q: Does this listing include a cable?
A: The referenced configuration is specified with a 10-meter cable.
Q: Is PFBL141B a PLC or control module?
A: No. It is a field force/tension sensing component.
Q: Can another ABB force sensor replace PFBL141B directly?
A: Not automatically. Capacity, mechanical design, sensor characteristics, cable configuration, and the connected measurement electronics should all be checked.
Q: Where is this type of sensor commonly used?
A: Typical applications include rolling mills, steel processing, paper machinery, and other industrial force-measurement systems.
🔧 Related ABB Force Measurement Models
- ABB PFBL141B-75KN
- ABB PFTL101B
- ABB PFTL201C
- ABB PFCL201C
- ABB PFCL301E
- ABB PFVL141
- ABB PFXC141
- ABB PFVO142
- ABB PFVO143
- ABB PFEA113
These models belong to related ABB force/tension measurement product families, but they are not necessarily direct replacements for PFBL141B. Always verify the complete part number and application before substitution.
