Description
The ABB PPD113B01-10-150000 is an AC 800PEC controller module, order code 3BHE023784R1023, designed for high-speed industrial control applications. ABB’s AC 800PEC platform combines very fast control of power-electronic equipment with conventional process-control functions.
The controller contains the AC 800PEC processor and interfaces for communication and peripheral I/O. The documented PPD113 controller uses a high-performance RISC processor and provides two AnyIO interfaces plus optical interfaces for connecting distributed I/O modules.
🔧 Key Features
- ABB AC 800PEC high-performance controller
- PPD113B01-10-150000 configuration
- ABB order code 3BHE023784R1023
- High-speed deterministic control
- Designed for power electronics and industrial drives
- Supports conventional low-speed process-control tasks
- Two AnyIO interfaces
- CEX2 / RS-422 interface configuration for this variant
- Fiber-optic I/O expansion
- Control Builder M engineering environment
- Suitable for excitation and power-converter applications
📋 Product Datasheet
| Parameter | Specification |
|---|---|
| Brand | ABB |
| Model | PPD113B01-10-150000 |
| Order Code | 3BHE023784R1023 |
| Product Family | AC 800PEC |
| Product Type | High-Performance Controller |
| Controller Designation | PP D113 |
| Processor | High-performance RISC processor |
| Processor Speed | 750 MHz* |
| Floating Point Unit | 64-bit IEEE FPU |
| AnyIO Interfaces | 2 |
| CEX / Serial Interface | CEX2-Bus RS-422 for documented configuration |
| I/O Expansion | Optical fiber interfaces |
| Programming | Control Builder M / AC 800PEC engineering tools |
| Control Cycle | Application-dependent; designed for very fast control loops |
| Mounting | AC 800PEC backplane |
| Application | Power converters, drives, excitation and industrial control |
*The 750 MHz processor and 64-bit FPU specifications are documented for the AC 800PEC PP D113 controller family. The exact PPD113 hardware configuration should be matched to the nameplate and system documentation.
⚡ Functional Description
The AC 800PEC controller is built around a modular architecture. The controller backplane accommodates the processor, power supply, communication modules, and optional interfaces. The PP D113 controller can connect to peripheral I/O through high-speed optical links, making it suitable for applications where conventional PLC scan times are not sufficient.
For the PPD113B01-10-150000, available configuration information identifies ANYIO-1 as CEX2-Bus RS422 and ANYIO-2 as empty. This configuration detail is useful when matching a replacement unit to an existing cabinet.
🏭 Typical Applications
- Generator excitation control
- Large power converters
- High-power electrical drives
- Rectifier control
- Inverter systems
- Renewable-energy power conversion
- Industrial power electronics
- High-speed machine control
- Power-generation automation
The AC 800PEC platform was specifically developed to combine high-speed power-electronics control with slower process functions that might otherwise require a separate PLC.
🔌 Installation & Configuration
- Verify the complete part number PPD113B01-10-150000.
- Confirm order code 3BHE023784R1023.
- Compare the AnyIO and communication configuration with the existing controller.
- Install the controller on the correct AC 800PEC backplane.
- Connect the required optical I/O and communication interfaces.
- Restore the approved control application and configuration.
- Verify communication with peripheral I/O.
- Check controller diagnostics before enabling the process.
- Perform functional testing under controlled conditions.
🛠️ Commissioning Checklist
- Check controller identification
- Verify backplane connections
- Confirm power supply
- Check processor status
- Verify AnyIO configuration
- Check RS-422/CEX communication where applicable
- Verify optical I/O links
- Confirm controller-to-I/O data exchange
- Load and verify the correct application
- Check alarms and diagnostics
- Perform final control-loop testing
⚠️ Replacement Note
There is a fair amount of inaccurate information online about this part number. In particular, some secondary listings describe PPD113B01-10-150000 as an analog-output module, but the available AC 800PEC documentation identifies PP D113 as the controller containing the processor and system interfaces.
For a replacement purchase, match 3BHE023784R1023, the PPD113 configuration, hardware revision, AnyIO configuration, and existing AC 800PEC application rather than relying only on the model number.
📦 Ordering Information
ABB PPD113B01-10-150000 | 3BHE023784R1023 | AC 800PEC Controller | High-Speed Industrial Control | Power Electronics & Excitation Applications
