Description
📌 Product Overview
The Applied Materials Uvision DP CAGE, P/N 4020569, is a semiconductor manufacturing equipment component associated with the Applied Materials Uvision platform.
The exact public documentation for this specific part number is limited, so this listing focuses on the confirmed identification rather than assigning unverified electrical or mechanical specifications. Public industrial-equipment listings identify 4020569 specifically as an Applied Materials Uvision DP CAGE.
The referenced eBay listing identifies the manufacturer as Applied Materials, model/P/N 4020569, and the item condition as Used. It is categorized under semiconductor and PCB manufacturing equipment.
⚙️ Technical Specifications
| Parameter | Specification |
|---|---|
| Brand | APPLIED MATERIALS |
| Part Number | 4020569 |
| Model / Identification | Uvision DP CAGE |
| Equipment Platform | Uvision |
| Product Type | Semiconductor Manufacturing Equipment Component |
| Application | Semiconductor / Wafer Processing Equipment |
| Manufacturer | Applied Materials |
| Condition | Used |
| Electrical Specifications | Not publicly confirmed |
| Dimensions | Verify from physical unit |
| Weight | Verify from physical unit |
| Country of Origin | Verify from physical unit |
| Accessories | Verify actual item and photos |
The eBay listing confirms the model/P/N and used condition but does not provide a detailed manufacturer datasheet or electrical specification for the cage assembly.
🔧 Key Features
- Genuine Applied Materials equipment part
- Uvision platform component
- Part number 4020569
- Intended for semiconductor manufacturing equipment
- Suitable for equipment maintenance and spare-parts inventory
- Useful for matching an existing Uvision system component
- Mechanical/electrical details should be matched against the installed part before replacement
🏭 Typical Application
The part is associated with semiconductor manufacturing equipment and can be considered for applications such as:
- Semiconductor fabrication equipment maintenance
- Wafer-processing equipment servicing
- Uvision equipment spare-parts replacement
- Semiconductor equipment refurbishment
- Factory equipment maintenance
- Long-term critical spare inventory
The exact function of the DP CAGE within the Uvision system should be confirmed against the equipment configuration and the physical part before installation.
🔍 Identification Guide
When purchasing or replacing this component, check the following information on the physical unit:
Manufacturer: Applied Materials
Platform: Uvision
Description: DP CAGE
P/N: 4020569
Also compare:
- Part-number label
- Revision marking
- Connector arrangement
- Mounting pattern
- Mechanical dimensions
- Cable/connector condition
- Any additional Applied Materials assembly number
Because Applied Materials equipment can use closely related assemblies for different configurations, matching the complete identification label is preferable to relying only on the general equipment family.
🧪 Inspection & Maintenance
For a used semiconductor-equipment component, a careful incoming inspection is recommended.
- Verify P/N 4020569 against the equipment service documentation.
- Check the identification label and revision markings.
- Inspect the cage/frame for deformation or impact damage.
- Check mounting points and fasteners.
- Inspect connectors for bent, damaged, or contaminated contacts.
- Check cables or attached hardware, if included.
- Remove dust and foreign particles using an appropriate clean-equipment procedure.
- Compare the assembly with the customer’s existing Uvision installation before commissioning.
For semiconductor equipment, cleanliness matters. Avoid introducing dust, oil, loose hardware, or other contamination into the process environment.
❓ Frequently Asked Questions
Q1: What is P/N 4020569?
It is identified as an Applied Materials Uvision DP CAGE.
Q2: Is this a PLC or control board?
No. The available identification describes it as a Uvision DP CAGE rather than a conventional PLC or standalone control module.
Q3: What equipment is it associated with?
The part is associated with the Applied Materials Uvision platform. Public industrial-equipment listings specifically associate P/N 4020569 with “Uvision DP CAGE.”
Q4: Is the listed item new?
The referenced eBay listing identifies the item as Used.
Q5: Can any Uvision cage be used as a replacement?
Not necessarily. The exact P/N, mechanical configuration, revision and equipment compatibility should be checked before replacement.
Q6: Are electrical specifications available?
No reliable public source located for this exact P/N provides a complete electrical specification. It is therefore better to verify the physical assembly and equipment documentation rather than publish unconfirmed voltage, current or interface data.
🔄 Related Applied Materials Equipment Parts
The following are related Applied Materials equipment components found in the same semiconductor-equipment spare-parts ecosystem. They are not direct replacements for P/N 4020569:
- Applied Materials Uvision IA PTM Cage Assembly 0090-A1000
- Applied Materials PCB Card Cage Assemblies
- Applied Materials Mainframe Interlock Assemblies
- Applied Materials Chamber Interlock Boards
- Applied Materials DeviceNet I/O Boards
- Applied Materials Gas Panel Control Assemblies
- Applied Materials Centura Equipment Assemblies
- Applied Materials Endura Equipment Assemblies
- Applied Materials VHP Robot Assemblies
- Applied Materials Process Module Components
A public equipment-parts listing places the Uvision DP CAGE P/N 4020569 alongside other Applied Materials Uvision and semiconductor-equipment components, including the Uvision IA PTM Cage Assembly 0090-A1000.
📦 Ordering Notes
For replacement purchasing, provide the complete identification information whenever possible:
Brand: APPLIED MATERIALS
P/N: 4020569
Description: Uvision DP CAGE
Condition: Used
Platform: Uvision
Please compare the actual physical part, mounting arrangement and identification label with the existing equipment before ordering.
The referenced eBay listing is currently offered as a Used Applied Materials Uvision DP CAGE, P/N 4020569.
