Description
Technical Parameters
| Feature | Specification |
|---|---|
| Brand | AUMA |
| Part Number | Z015.998 |
| Voltage | 24V DC |
| Component Type | Interface / Logic Board |
| Compatibility | AUMA MATIC / AUMATIC Actuator Controls |
| Signal Type | Digital/Analog Interface |
| Power Consumption | Low Power Industrial Grade |
| Connection Type | Multi-pin Plug-in Connector |
Product Datasheet
| Attribute | Details |
|---|---|
| Dimensions | 115mm x 85mm x 25mm |
| Weight | 0.28 kg |
| Country of Origin | Germany |
| Material | Fiberglass Reinforced PCB |
| Protection Class | IP67 (when installed in housing) |
| Operating Temperature | -25°C to +70°C |
Application Fields
The Z015.998 interface board is a vital communication link within AUMA valve actuators. Its primary applications include:
- Remote control interface for water and wastewater treatment plants.
- Communication between the actuator control unit and PLC/DCS systems.
- Industrial flow control in HVAC and heating systems.
- Automation of gate, globe, and ball valves in chemical processing.
Product Instructions
- Preparation: Disconnect the power supply to the actuator housing before opening the cover to install the Z015.998 board.
- Mounting: Carefully plug the board into its designated slot on the main control logic frame. Ensure the pins are aligned to avoid bending.
- Wiring: Connect the 24V DC power and control signal cables according to the AUMA wiring diagram specific to your actuator model.
- Testing: Power on the unit and check the LED indicators (if applicable) to confirm that the interface is successfully communicating with the central control system.
Q&A Section
Q1: Is the Z015.998 compatible with both AC and DC actuators? A1: This specific board is designed for 24V interface logic. While the actuator motor may be AC, the control circuit using this board must support 24V DC signal levels.
Q2: What happens if the interface board fails? A2: A failure usually results in a “Remote Control Loss,” where the actuator can only be operated via the local manual handwheel or local pushbuttons, but not through the PLC.
Q3: Does this board require software programming? A3: Generally, the Z015.998 is a hardware interface. However, the main actuator logic (MATIC/AUMATIC) may need to be configured to recognize the specific inputs/outputs provided by this board.
Recommended Similar Models
- AUMA Z014.246
- AUMA Z031.751
- AUMA Z009.636
- AUMA Z015.655
- AUMA Z043.432
