Description
⚙️ Product Introduction
The AUTRONICA NK-110 / NK-110A/8-MP Preprocessing Circuit Module is a specialized electronic module associated with Autronica marine automation and engine monitoring systems.
The NK-110A/8-MP identification is also associated with part number 7212-227.0001 in available equipment records. The module is listed as a preprocessing circuit used in marine automation applications, including engine-related monitoring and control equipment.
As a dedicated preprocessing module, it is intended to handle or condition incoming signals before they are passed to higher-level control, monitoring, or indication equipment. Exact I/O functions should be verified against the original system documentation and the module nameplate before replacement.
The NK-110, NK-110A/8-MP, and 7212-227.0001 identifiers should be checked carefully when sourcing a replacement, especially for legacy marine installations.
📋 Product Datasheet
| Parameter | Specification |
|---|---|
| Brand | Autronica |
| Model | NK-110 |
| Series | NK-110 Marine Automation Series |
| Product Name | Preprocessing Circuit Module |
| Part Number | NK-110A/8-MP / 7212-227.0001 |
| Product Type | Signal Preprocessing / Electronic Circuit Module |
| Application | Marine Engine Monitoring & Automation |
| Condition / Status | New / Surplus Replacement Part |
| Dimensions | Not specified; verify from actual module |
| Power | System-dependent; verify nameplate and equipment documentation |
🔧 Product Features
🔹 Signal Preprocessing
Designed to perform preprocessing functions within a marine automation control architecture before signals are handled by subsequent control or monitoring equipment.
🔹 Marine Automation Application
The module is associated with Autronica equipment used in marine and engine-room automation environments.
🔹 Legacy Equipment Support
The NK-110 family is useful for maintaining older Autronica installations where an exact replacement board may be difficult to source.
🔹 Dedicated Hardware
This is a specialized circuit module rather than a general-purpose PLC I/O module, so application compatibility should be confirmed carefully.
🔹 Part Number Matching
The NK-110A/8-MP / 7212-227.0001 identification is particularly important when matching replacement inventory.
🛠️ Installation & Maintenance
🔸 Disconnect and isolate the associated equipment before removing the circuit module.
🔸 Record all cable and connector positions before replacement.
🔸 Check the PCB for corrosion, contamination, damaged components, loose connectors, or signs of overheating.
🔸 Confirm the module identification and part number before installation.
🔸 Use suitable ESD protection when handling the electronic circuit board.
🔸 After installation, verify the associated input signals, preprocessing functions, alarms, indications, and communication with the main control system.
🔸 For marine engine applications, complete functional testing according to the vessel’s maintenance procedures before returning the equipment to normal operation.
❓ Frequently Asked Questions
Q: What is the AUTRONICA NK-110?
A: It is a specialized preprocessing circuit module used in Autronica marine automation equipment.
Q: What is the full part number?
A: The module is identified as NK-110A/8-MP, with available equipment records also associating it with 7212-227.0001.
Q: What does a preprocessing circuit module do?
A: It generally conditions, processes, or prepares incoming signals before they are transferred to subsequent monitoring or control stages. The exact function depends on the host Autronica system.
Q: Is the NK-110 a PLC module?
A: It is better classified as a dedicated marine automation preprocessing circuit module, rather than a standard modular PLC I/O card.
Q: What equipment is it used with?
A: Available listings associate the NK-110A/8-MP with Autronica marine automation and engine-related systems. Exact compatibility should be established from the equipment model and original module markings.
Q: Can I replace another NK-110 version with NK-110A/8-MP?
A: Do not assume interchangeability. Verify the complete part number, revision, connector arrangement, system application, and electrical specifications before replacement.
Q: What should I check before ordering?
A: Confirm NK-110, NK-110A/8-MP, 7212-227.0001, the PCB markings, connector configuration, and the equipment in which the original module is installed.
Q: Is this suitable as a marine spare part?
A: Yes, an exact-match NK-110 module can be useful for planned maintenance and replacement of legacy Autronica marine automation equipment.
📦 Recommended AUTRONICA Models
- AUTRONICA NKA-110 – Preprocessing / Control PCB
- AUTRONICA NKA-110A/8-MP – Marine Automation Circuit Module
- AUTRONICA NKA-110 7212-227.0001 – PCB Card
- AUTRONICA NKL-5 – PCB Card
- AUTRONICA NLA-2/A – Alarm Control Module
- AUTRONICA MN-524/5 – Resistance Thermometer Module
- AUTRONICA MN524T250U – Temperature Sensor
- AUTRONICA AL-100/AI8EX 7212-235.0000 – Pressure Transducer
- AUTRONICA AL-100A/I8EX 7212-235.0002 – Pressure Transducer
- AUTRONICA XCZ-002 11-15 – Terminal Box with Diode Safety Barriers
⚠️ Compatibility Note: Marine automation electronics can be system-specific. Always match the complete NK-110A/8-MP / 7212-227.0001 identification, connector arrangement, and host equipment before installation.
