Description
Product Overview
The Bently Nevada 3500/05-01-02-00-00-00 is a full-size 19-inch System Rack for the 3500 Machinery Protection System. It provides the mechanical mounting structure and backplane used to install 3500 monitoring modules, power supplies, and system interface hardware.
This configuration is a rack-mount version designed for installation in a standard 19-inch EIA rack. It provides 14 available module positions for the 3500 monitoring system, while the power supply and Rack Interface Module occupy the designated positions on the left side of the rack.
The rack itself is not a vibration monitor or measurement module. Its job is to provide the common platform through which the installed 3500 modules receive power and communicate with each other.
Main Features
- Bently Nevada 3500 Machinery Protection System rack
- Full-size 19-inch EIA rack configuration
- 14 available module positions
- Rack-mount installation
- Backplane for 3500 system modules
- Supports 3500 monitor modules and rack power supplies
- Suitable for modular machinery protection systems
- Designed for rear access to wiring and I/O connections
- Supports combinations of vibration, position, speed, temperature, relay, and communication modules
- Model-specific configuration: 3500/05-01-02-00-00-00
Product Datasheet
| Parameter | Specification |
|---|---|
| Brand | Bently Nevada |
| Model | 3500/05-01-02-00-00-00 |
| Product Type | 3500 System Rack |
| System | 3500 Machinery Protection System |
| Rack Size | 19-inch full-size rack |
| Available Module Positions | 14 |
| Mounting Option | Rack Mount |
| EIA Rack Compatibility | 19-inch EIA |
| Agency Approval Option | None |
| Reserved Option | None |
| Mounting Access | Rear wiring / I/O access |
| Power Supply Location | Far-left rack positions |
| RIM Location | Far-left rack positions |
| Operating Temperature | -20°C to +65°C typical listed range |
| Extended Operating Temperature | -30°C to +65°C |
| Storage Temperature | -40°C to +85°C |
| Relative Humidity | 5–95%, non-condensing |
The current Bently Nevada datasheet specifies two rack sizes: a full-size 19-inch rack with 14 available module slots and a 12-inch mini-rack with seven available slots. The ordering code confirms 01 as the 19-inch rack and 02 as the full-size rack-mount option.
System Function
The 3500/05 forms the physical backbone of a 3500 monitoring system.
A typical rack can contain several types of modules, depending on the machinery being monitored. Vibration monitoring, Keyphasor, position, temperature, relay, communication, and other 3500 modules are installed into the rack and connected through its backplane.
The rack also provides the infrastructure needed for power distribution and module-to-module communication. This is why replacing the rack is more than a simple mechanical change: the rack configuration, installed modules, power supplies, and Rack Interface Module all need to match the intended 3500 system architecture.
Rack Configuration
For this particular ordering code:
3500/05 – 01 – 02 – 00 – 00 – 00
01— 19-inch full-size rack, 14 available module positions02— rack-mount option for a 19-inch EIA rack00— no agency approval option00— reserved / none00— configuration suffix as specified by the complete ordering code
This is important when replacing an existing rack. A visually similar 3500/05 may have a different mounting arrangement, rack size, approval option, or configuration suffix.
Typical Applications
The 3500/05 rack is commonly used as part of continuous machinery monitoring and protection systems for equipment such as:
- Steam turbines
- Gas turbines
- Generators
- Compressors
- Pumps
- Large motors
- Gearboxes
- Fans and rotating machinery
- Process machinery
A typical system may combine proximity monitoring, vibration monitoring, speed measurement, temperature monitoring, relay outputs, and communication functions inside the same 3500 rack.
Compatible 3500 Modules
Depending on the system configuration, the rack can accommodate modules such as:
- 3500/15 Power Supply
- 3500/20 Rack Interface Module
- 3500/22M Transient Data Interface
- 3500/25 Enhanced Keyphasor Module
- 3500/32 Relay Module
- 3500/42M Proximitor/Seismic Monitor
- 3500/45 Position Monitor
- 3500/50 Tachometer Module
- 3500/60 Temperature Monitor
- 3500/92 Communication Gateway
- 3500/93 Display Interface Module
The exact module combination depends on the monitoring and protection functions required by the machine.
Installation and Replacement Guide
Before installing a replacement 3500/05 rack, isolate the associated equipment and follow the plant’s electrical and machinery-protection procedures.
Recommended replacement steps:
- Record the existing rack part number and complete ordering code.
- Photograph the installed module arrangement.
- Record the positions of the power supplies and Rack Interface Module.
- Label external wiring before removing the existing rack.
- Verify the replacement rack has the same rack size and mounting configuration.
- Inspect the backplane connectors for bent pins, contamination, or mechanical damage.
- Install the rack securely in the 19-inch EIA cabinet.
- Reinstall the system modules in their original positions where applicable.
- Reconnect wiring and verify terminal assignments.
- Power the system according to the approved commissioning procedure.
- Confirm module status and communication after startup.
The Bently Nevada datasheet specifies that the power supplies and Rack Interface Module must occupy the far-left rack positions, with the remaining 14 positions available for module combinations.
Maintenance
The rack contains the common mechanical and backplane infrastructure for the 3500 system, so inspection should focus on connectors, mounting hardware, ventilation, and contamination.
Recommended checks include:
- Inspect backplane connectors.
- Check for bent or damaged pins.
- Remove dust and conductive contamination.
- Check rack mounting screws and hardware.
- Inspect wiring around the rack.
- Check for corrosion or moisture.
- Verify module seating.
- Inspect power supply connections.
- Check the rack after any major cabinet maintenance.
- Keep an accurate record of installed module positions.
Avoid using aggressive cleaning agents around electrical connectors. If a backplane connector is damaged, replacement of the rack may be more appropriate than attempting field repair.
Compatibility Notes
The model number must be checked carefully before replacement.
A 3500/05 rack can look similar to other 3500/05 versions while having different:
- Rack size
- Mounting method
- Agency approval
- Internal barrier configuration
- Module-position arrangement
For this reason, do not replace a 3500/05-01-02-00-00-00 solely by matching the words “3500 System Rack.” Match the complete ordering code and the mechanical configuration.
The 3500/05-01-02-00-00-00 is specifically the 19-inch full-size rack-mount configuration with 14 available module positions.
FAQ
Q: What is the 3500/05-01-02-00-00-00?
A: It is a full-size 19-inch Bently Nevada 3500 System Rack used to mount and interconnect 3500 system modules.
Q: How many module positions are available?
A: The full-size rack provides 14 available module positions.
Q: Is this a vibration monitoring module?
A: No. It is the system rack/backplane platform. Individual 3500 monitoring modules are installed into the rack.
Q: Does it include the power supply?
A: The rack is the mounting and backplane assembly. A power supply should not be assumed to be included unless specifically stated in the sale.
Q: Can I use a mini-rack instead?
A: Not as a direct mechanical replacement. The mini-rack is a different 12-inch configuration with seven available module positions.
Q: What mounting system does this model use?
A: The 02 configuration identifies the full-size rack-mount option for a 19-inch EIA rack.
Q: Which modules can be installed?
A: Depending on the system configuration, the rack can accommodate compatible 3500 monitor, relay, Keyphasor, communication, display, and power-supply modules.
Recommended Related Models
- Bently Nevada 3500/15 AC Power Supply Module
- Bently Nevada 3500/20 Rack Interface Module
- Bently Nevada 3500/22M Transient Data Interface
- Bently Nevada 3500/25 Enhanced Keyphasor Module
- Bently Nevada 3500/32 Relay Module
- Bently Nevada 3500/42M Proximitor/Seismic Monitor
- Bently Nevada 3500/45 Position Monitor
- Bently Nevada 3500/50 Tachometer Module
- Bently Nevada 3500/60 Temperature Monitor
- Bently Nevada 3500/92 Communication Gateway
Inspection Before Shipment
For this type of rack, a proper pre-shipment inspection should include:
- Verify complete model number: 3500/05-01-02-00-00-00.
- Check the Bently Nevada nameplate or identification label.
- Inspect the rack frame for bending or impact damage.
- Inspect all backplane connectors.
- Check mounting holes and rack hardware.
- Inspect for corrosion or contamination.
- Confirm the module guide rails are intact.
- Photograph the front, rear, connectors, and nameplate.
- Confirm included accessories against the actual sales listing.
- Package the rack securely to prevent connector and frame damage during transportation.
For an industrial spare, the safest practice is to match the complete part number and physical configuration before shipment rather than relying only on the product family name.
Recommended Listing Title
BENTLY NEVADA | 3500/05-01-02-00-00-00 | 19-Inch System Rack | 14-Slot
