Description
🔹 Product Overview
The BOSCH 0-608-830-157 / 0608830157 is a PC Control Board used in the Bosch SE220 industrial control platform. Available component references identify it as a SE220 servo controller PCB / PC control board, with a 24 V, 1.5 A specification associated with the board.
The board is part of a larger modular Bosch SE220 control architecture. It should be treated as a board-level replacement component rather than a complete servo controller or complete control system.
🔹 Key Features
- Bosch SE220 control-system component
- Part number 0-608-830-157
- Alternate identification 0608830157
- PC control board / servo controller PCB
- Designed for legacy Bosch industrial automation equipment
- Board-level replacement for maintenance and repair
- Suitable for SE220 system restoration
- Compatible with the broader SE220 modular architecture
- Exact board revision and machine configuration should be verified before replacement
🔹 Technical Datasheet
| Parameter | Specification |
|---|---|
| Brand | BOSCH |
| Model | 0-608-830-157 |
| Alternate Part Number | 0608830157 |
| Product Series | Bosch SE220 |
| Product Name | PC Control Board |
| Product Type | Servo Controller / PC Control PCB |
| Associated System | SE220 Industrial Control System |
| Supply Specification | 24 VDC, 1.5 A associated configuration |
| Board Function | PC / Servo Control Processing |
| Product Status | Legacy / Industrial Automation Spare |
🔹 SE220 Control Function
The 0-608-830-157 is associated with the Bosch SE220 servo-control architecture. Its role is at the electronic control-board level, where control processing interfaces with the other modules installed in the SE220 system.
A typical system arrangement can include:
SE220 Control Board → Servo / Control Electronics → Drive or Actuator → Machine
The exact signal flow depends on the complete SE220 configuration and connected control modules.
🔹 System Integration
The board should be evaluated together with the surrounding SE220 hardware. Related SE220 components include the 0-608-830-141 torque control board, 0-608-830-142 control unit, 0-608-830-156 rack with power supply, and 0-608-830-158 rack.
When replacing the PC control board, compare:
- Complete part number
- PCB revision
- Connector arrangement
- Rack position
- Power connections
- Associated SE220 controller
- Servo/control configuration
- Machine-specific wiring
- Existing parameter and configuration data
A similar-looking Bosch board should not be assumed to be interchangeable.
🔹 Typical Applications
The SE220 platform and associated control boards can be encountered in legacy industrial equipment such as:
- Industrial assembly machinery
- Automated production systems
- Servo-controlled machinery
- Machine tools
- Tightening and motion-control equipment
- Legacy Bosch automation installations
- Industrial equipment requiring electronic control-board replacement
🔹 Installation & Commissioning
- Switch off the complete control system before removing the board.
- Isolate the external power supply.
- Verify the DC bus and control voltages are at safe levels.
- Record the original board position and connector locations.
- Confirm the replacement part number 0-608-830-157 / 0608830157.
- Inspect connectors and backplane contacts.
- Check the surrounding SE220 modules for visible damage.
- Install the board carefully into the correct rack position.
- Verify supply polarity and wiring.
- Perform a controlled power-up.
- Check controller status and servo operation before returning the machine to production.
🔹 Troubleshooting
Control system does not start:
Check the SE220 power supply, rack connections, board seating and associated controller modules.
Servo system does not respond:
Inspect control signals, connected servo electronics, wiring and machine enable conditions.
Intermittent operation:
Check card-edge contacts, connectors, power stability and signs of thermal stress.
Board repeatedly fails:
Investigate the power supply, connected loads and adjacent modules before installing another replacement board.
Replacement board is not recognized:
Verify the exact Bosch part number, hardware revision, rack position and compatibility with the existing SE220 configuration.
🔹 Maintenance
For legacy SE220 systems:
- Keep the control cabinet clean and dry.
- Maintain adequate ventilation.
- Inspect connectors during scheduled maintenance.
- Check supply voltage stability.
- Look for discolored components or signs of overheating.
- Record PCB revision information.
- Maintain a tested spare for critical production equipment.
- Preserve existing machine parameters and configuration data.
🔹 Replacement Considerations
The 0-608-830-157 should be replaced with the same complete identification whenever possible.
The Bosch SE220 family contains several different boards and modules, including control, torque-control, communication, rack and power-supply components. Therefore, a different SE220 part number should not be substituted solely because it fits the same rack.
Before replacement, verify the 0-608-830-157 / 0608830157 marking, PCB revision, connector layout and the exact SE220 system configuration.
🔹 FAQ
What is BOSCH 0-608-830-157?
It is a Bosch SE220 PC Control Board, also identified by part number 0608830157.
Is 0608830157 the same part number?
Yes. 0608830157 is the numerical form commonly associated with Bosch part number 0-608-830-157.
Is it a complete servo controller?
No. It is a board-level PC/servo control component used within the larger SE220 control architecture.
What voltage is associated with this board?
Available component records associate the configuration with 24 VDC and 1.5 A. The complete machine/system configuration should be checked before applying power.
Can it replace other SE220 boards?
Not automatically. SE220 boards have different functions and should be matched by exact part number and application.
What should be checked before installation?
Check the part number, PCB revision, connector layout, rack position, power requirements and existing SE220 configuration.
🔹 10 Related BOSCH SE220 Models & Components
- BOSCH 0-608-830-141 | SE220 Torque Control Board
- BOSCH 0-608-830-142 | SE220 Control Unit
- BOSCH 0-608-830-156 | SE220 Rack with Power Supply
- BOSCH 0-608-830-158 | SE220 Rack
- BOSCH 0-608-830-160 | Tightening Controller
- BOSCH 0-608-830-161 | Controller Communication Unit
- BOSCH 0-608-830-162 | Communication Unit
- BOSCH 0-608-830-166 | I/O Interface Module
- BOSCH 0-608-830-193 | SE220 Communication Module
- BOSCH 0-608-750-059 | VML 25 Power Supply
🔹 Product Summary
The BOSCH 0-608-830-157 / 0608830157 SE220 PC Control Board is a legacy Bosch control PCB associated with the SE220 industrial automation and servo-control platform. It is suitable as a maintenance or replacement spare where the original SE220 architecture remains in operation.
For reliable replacement, match the complete Bosch part number, board revision, rack position and surrounding SE220 hardware configuration rather than relying on physical appearance alone.
