Description
🔧 Product Overview
The B&R AUTOMATION 5C5000.01 Rev.C0 is a Provit 5000 Controller Bus Unit designed for B&R’s IPC5000 / Provit 5000 industrial computer platform.
Rather than functioning as a standalone interface PCB, the 5C5000.01 provides the bus, mounting, expansion, and power infrastructure for compatible Provit 5000 system units. The unit provides two expansion slots: one B&R ISA slot and one half-size combination ISA/PCI slot. It is designed for use with compatible 5C5001.xx system units.
The supplied identification is 5C5000.01 Rev.C0. The Rev.C0 designation should be retained when matching a replacement unit.
⚙️ Main Features
- 🖥️ B&R Provit 5000 controller bus unit
- 🔌 2 expansion slots
- 🧩 1 B&R ISA 16-bit slot
- 🧩 1 half-size ISA/PCI combination slot
- ⚡ 100–240 VAC nominal supply
- 🔄 Designed for compatible 5C5001.xx system units
- 🏭 Intended for industrial control-computer applications
- 🌀 Integrated cooling fan arrangement
- 🔧 Suitable for legacy IPC5000 / Provit 5000 system maintenance
- 📦 Useful as a replacement bus/chassis unit for existing installations
📋 Datasheet
| Parameter | Value |
|---|---|
| Brand | B&R AUTOMATION |
| Model | 5C5000.01 |
| Revision | Rev.C0 |
| Product Name | Provit 5000 Controller Bus Unit |
| Series | Provit 5000 / IPC5000 |
| Total Slots | 2 |
| Slot Configuration | 1 × B&R ISA 16-bit + 1 × half-size ISA/PCI |
| Supply Voltage | 100–240 VAC |
| Compatible System Unit | 5C5001.xx |
| Condition / Status | Industrial Automation Spare — verify actual unit condition |
🖥️ System Architecture
The Provit 5000 controller consists of several major components, including the bus unit, system unit, processor, and memory. The 5C5000.01 provides the bus-unit portion of this architecture.
The two-slot design accommodates the specified B&R ISA and half-size ISA/PCI combination expansion interfaces. This makes the unit an important structural and electrical component in legacy Provit 5000 industrial computer systems.
🔌 Power & Expansion
The 5C5000.01 uses a 100–240 VAC power supply. Technical documentation specifies an operating supply range of approximately 85–264 VAC with a 50–60 Hz input frequency.
The bus unit provides:
- One B&R ISA 16-bit interface
- One half-size ISA/PCI combination position
- Power distribution for the associated system
- Mechanical mounting for compatible modules
- Cooling through integrated fan hardware
The exact expansion cards installed in an individual system depend on the original machine configuration.
🏭 Typical Applications
The 5C5000.01 can be found in legacy industrial computer and automation installations such as:
- Industrial machine control
- Production-line automation
- Process-control systems
- Industrial operator stations
- Manufacturing equipment
- Machine visualization systems
- Legacy IPC-based control platforms
- Retrofit and maintenance projects
Because Provit 5000 is an earlier industrial computer platform, the 5C5000.01 is particularly relevant when maintaining existing installations where modernization would otherwise require substantial system changes.
🛠️ Installation Considerations
Before replacing an existing 5C5000.01:
- Confirm the complete material number 5C5000.01.
- Check the revision marking, including Rev.C0 where applicable.
- Verify the incoming AC supply.
- Confirm that the installed system unit belongs to the compatible 5C5001.xx family.
- Record the installed ISA and ISA/PCI expansion cards.
- Inspect all card-edge connectors and mounting points.
- Check the cooling fans for abnormal noise or restricted airflow.
- Inspect the AC power wiring and grounding connection.
- Confirm correct card positioning before powering the system.
- Test the complete controller after replacement.
⚠️ Disconnect the AC supply before removing the bus unit or accessing internal expansion cards. Installation and servicing should be performed by qualified personnel.
🔧 Maintenance & Troubleshooting
System Does Not Power Up
Check the AC input, power cable, grounding connection, internal power circuitry, and system-unit connections.
Expansion Card Is Not Detected
Verify that the card is correctly seated and installed in the appropriate ISA or ISA/PCI position. Inspect the connector for contamination or mechanical damage.
System Overheats
Inspect the integrated cooling fans and airflow path. Dust accumulation or failed fans can reduce cooling performance.
Intermittent Operation
Check the bus connections, expansion-card seating, power connections, and signs of oxidation or mechanical stress.
Replacement Unit Has a Different Configuration
Do not assume that another 5C5000-series bus unit is electrically interchangeable. Slot count, supply voltage, and system compatibility can differ between model numbers.
❓ Common Questions & Answers
Q1: What is the B&R 5C5000.01?
It is a Provit 5000 Controller Bus Unit used as part of the B&R IPC5000 industrial computer platform.
Q2: Is 5C5000.01 an interface board?
It is often listed commercially as an interface board or interface board unit, but B&R’s official description identifies it more specifically as a Provit 5000 Controller Bus Unit.
Q3: How many slots does it have?
The 5C5000.01 has two expansion positions: one B&R ISA 16-bit slot and one half-size ISA/PCI combination slot.
Q4: What is the input voltage?
The nominal supply is 100–240 VAC, with technical documentation specifying an approximately 85–264 VAC operating range.
Q5: Which system units are compatible with it?
B&R identifies the 5C5000.01 for use with 5C5001.xx system units.
Q6: Is it a standalone PLC?
No. It is a bus/chassis component of the Provit 5000 industrial computer architecture.
Q7: What should be checked before ordering?
Verify the material number, revision, supply voltage, slot configuration, compatible system unit, and installed expansion cards.
Q8: Does the 5C5000.01 require cooling?
Yes. Technical documentation identifies two 40 mm ball-bearing fans with analog control for this bus-unit version.
Q9: Can a 24 VDC version replace the 5C5000.01 directly?
Not automatically. B&R lists separate 24 VDC versions, such as the 5C5000.02, so the power configuration must be matched to the existing system.
Q10: Is 5C5000.01 suitable for legacy equipment repair?
Yes. It is particularly useful for maintaining existing Provit 5000 / IPC5000 installations where the original controller architecture is still in service.
🔄 10 Related B&R Models
- 5C5000.01 — Provit 5000 Controller Bus Unit, 2-slot AC version
- 5C5000.02 — Provit 5000 Controller Bus Unit, 2-slot DC version
- 5C5000.11 — Provit 5000 Controller Bus Unit, 4-slot AC version
- 5C5000.12 — Provit 5000 Controller Bus Unit, 4-slot DC version
- 5C5000.21 — Provit 5000 Controller Bus Unit, 2-slot AC version
- 5C5000.22 — Provit 5000 Controller Bus Unit, 2-slot DC version
- 5C5000.31 — Provit 5000 Controller Bus Unit, 5-slot AC version
- 5C5000.32 — Provit 5000 Controller Bus Unit, 5-slot DC version
- 5C5001.01 — Provit 5000 Controller System Unit
- 5C5001.03 — Provit 5000 Controller System Unit
📦 Spare-Part Note
When sourcing a replacement for B&R 5C5000.01 Rev.C0, match the complete material number and revision, and verify the AC supply and installed expansion-card configuration. The 5C5000.01 is a specific Provit 5000 bus-unit configuration and should not be treated as interchangeable with every 5C5000-series model.
