Description
The Honeywell CC-TAIX11 (Part Number: 51308365-175) is a high-performance redundant Input/Output Termination Assembly (IOTA) engineered for the Experion PKS Series C distributed control architecture. Designed for critical industrial process automation environments, it provides secure, reliable signal termination and processing for various analog field devices while supporting full module redundancy. The technical datasheet outlines ten core parameter specifications for this unit:
| Parameter | Specification Details |
| Manufacturer | Honeywell International Inc. |
| Product Type | Analog Input IOTA Redundant |
| Model Designation | CC-TAIX11 (Part Number: 51308365-175) |
| Input Channels | 16 Channels (12 Single-Ended + 4 Differential) |
| A/D Converter Resolution | 16 bits |
| Power / Supply Architecture | Series C backplane power with loop-powered transmitter support |
| Item Weight | Approximately 1.0 kg |
| Physical Dimensions | 12-inch redundant form factor (approx. 263 mm x 138 mm x 88 mm) |
| Operating Temperature | -40°C to +85°C |
| Country of Origin | United States |
📖 Product Usage Instructions
🛠️ Power Isolation: Always ensure that system rack power supplies and external loop feeds are completely switched off and locked out before installing, wiring, or removing the IOTA board.
🔌 Secure Mounting: Align the 12-inch redundant IOTA assembly carefully within the designated cabinet slot, securing it tightly to withstand industrial vibration and ensure solid backplane engagement.
🔧 Wiring Verification: Connect field wiring to the appropriate terminal blocks, keeping in mind that channels 1 through 12 are optimized for classic two-wire transmitters, while channels 13 through 16 support diverse input configurations.
🧪 Diagnostic Monitoring: Check front-panel module LEDs and controller software diagnostic logs to verify channel status, signal integrity, and proper operation of the redundant configuration.
❓ Frequently Asked Questions (Q&A)
- Q: What is the primary purpose of the CC-TAIX11 IOTA module?
A: It serves as a redundant termination and input assembly designed to interface analog field instruments safely and reliably with Honeywell Experion Series C control systems.
- Q: Does this module support two-wire transmitters out of the box?
A: Yes, all 16 channels can accept inputs from standard two-wire transmitters, with the first 12 channels pre-optimized specifically for them.
- Q: What steps should be taken if a signal channel fails in a redundant setup?
A: The redundant architecture allows the backup module to maintain control continuity; check the faulty module’s diagnostic indicators, inspect field wiring, and hot-swap the affected module if necessary.
🔍 Recommended Alternative Models & Series
To support your industrial control system maintenance, spare parts management, and network expansions, here are ten alternative modules and series from Honeywell:
- Honeywell CC-TAIX01 Non-Redundant Analog Input IOTA
- Honeywell CC-PAIH01 Analog Input Module
- Honeywell CC-PAOX01 Analog Output Module
- Honeywell CC-PD0B01 Digital Output Module
- Honeywell CC-PDIL01 Digital Input Module
- Honeywell C300 Controller Module
- Honeywell 51198651-100 Power Supply Module
- Honeywell TC-CCR013 ControlNet Interface Module
- Honeywell Safety Manager LSM Module
- Honeywell ControlEdge PLC Series
