Description
Product Technical Parameters
| Feature | Specification |
|---|---|
| Brand | CENTON |
| Model | 2017501-006 |
| Part Number | 2017501-006 |
| Component Type | Sensor Near Electronics Board (SNE) |
| System Compatibility | Industrial Sensing / Monitoring Systems |
| Input Signal | Low-voltage sensor interface |
| Output Type | Processed digital/analog signal to main controller |
| Board Revision | Revision-specific (006 series) |
Product Datasheet
| Attribute | Details |
|---|---|
| Dimensions | 12.4 cm x 8.9 cm x 2.2 cm |
| Weight | 0.28 kg (approx. 0.62 lbs) |
| Country of Origin | USA |
| Operating Voltage | 5V / 12V DC (typical) |
| Mounting Type | Fixed screw-hole mounting |
| Connector Type | Multi-pin ribbon or header connectors |
| Environmental Rating | Industrial-grade component |
Application Fields
The 2017501-006 is a specialized interface board used to bridge physical sensors with primary processing electronics. Major applications include:
- Precision Industrial Measuring Equipment
- High-accuracy Temperature or Pressure Sensing Arrays
- Automated Inspection Systems
- Medical Imaging Peripheral Hardware
- Specialized Signal Conditioning Units
Product Instructions
- Pre-Installation: Ensure all power sources to the host equipment are disconnected. Use an ESD (Electrostatic Discharge) wrist strap to handle the board, as sensitive ICs are prone to static damage.
- Alignment: Align the P/N 2017501-006 board with the internal chassis standoffs. Ensure the “Sensor Near” orientation is maintained according to the system diagram to minimize signal noise.
- Cable Integration: Connect the sensor input leads to the primary header. Ensure the locking clips on the connectors are fully engaged to prevent signal intermittent loss due to vibration.
- Calibration: Once powered, the system may require a zero-point calibration via the software interface to synchronize the new SNE board with the existing sensor array.
Product Q&A
Q: What does “Sensor Near Electronics” specifically refer to? A: It refers to a board designed to be physically located close to the sensor. This proximity reduces the distance low-level signals travel, minimizing electromagnetic interference (EMI) and signal degradation before amplification.
Q: Is this board compatible with all 2017501 series systems? A: While it belongs to the 2017501 family, the suffix “-006” denotes a specific revision or configuration. Always check your system’s technical manual to ensure the -006 revision matches your hardware requirements.
Q: Can the 2017501-006 be repaired if a component fails? A: Due to the high density of surface-mount components, field repairs are generally not recommended. It is standard practice to replace the entire PCB to maintain system certification and reliability.
Q: What are the symptoms of a failing SNE board? A: Common indicators include unstable sensor readings, “Sensor Communication Error” messages on the HMI, or the inability of the system to complete its initial power-on self-test (POST).
Similar Models Recommendation
- CENTON 2017501-001
- CENTON 2017501-004
- CENTON 2017501-005
- CENTON 2017501-007
- CENTON 2017502-001
