Description
Product Overview
The COGNEX VPM-4114-01 is a vision processing/controller board associated with the Cognex 4100 series. Available equipment references identify the VPM-4114 family as a VME vision controller / vision processor, with the VPM-4114-01 also appearing under related identifiers such as 200-0029S, VM14, and 203-0028-RC.
This type of board is intended for integration into industrial machine-vision equipment where image-processing hardware, vision control, and communication with the host machine are handled through a VME-based architecture.
The exact board revision and configuration should always be matched against the physical PCB markings before installation, especially when replacing an older VPM-4114 variant.
Technical Specifications
| Item | Details |
|---|---|
| Brand | COGNEX |
| Series | 4100 Series |
| Model | VPM-4114-01 |
| Product Type | Vision Processor / Vision Controller Board |
| Architecture | VME-based |
| Related Identification | VM14 / 203-0028-RC |
| Related Part Number | 200-0029S |
| Additional Listing Reference | 801-4102-02 C |
| Application | Industrial Machine Vision |
| Board Type | Vision Processing PCB |
| Condition | Verify according to the actual unit offered |
The VPM-4114 family is specifically documented in repair and equipment references as a Cognex VME vision controller/processor family.
Key Features
- Cognex 4100-series vision processing hardware
- VME-based industrial vision controller architecture
- Model-specific identification: VPM-4114-01
- Associated with the VM14 vision board family
- Suitable for replacement or maintenance of legacy Cognex vision equipment
- Useful as a spare for systems where the original Cognex controller is no longer readily available
Typical Applications
The VPM-4114-01 can be used in industrial machine-vision equipment for applications such as:
- Automated visual inspection
- Semiconductor and electronics inspection
- Component inspection
- Manufacturing quality control
- Machine-vision processing
- Legacy Cognex inspection-system maintenance
- Replacement of failed or aging vision processor boards
Because the 4100 series is a legacy platform, this board can be particularly useful when maintaining an existing system where replacing the entire vision controller would require significant hardware and software changes.
Installation & Configuration
Before installation, compare the replacement board with the original unit carefully.
Recommended procedure:
- Shut down the host vision system and remove system power.
- Observe appropriate ESD precautions when handling the PCB.
- Confirm the VPM-4114-01 model and revision markings.
- Check the VME backplane and slot position against the original installation.
- Inspect the board edge connector and mounting hardware for contamination or damage.
- Install the board firmly without forcing the connector.
- Restore power and check system diagnostics.
- Confirm communication between the vision processor and the remaining system hardware.
- Run the machine-vision application and perform an image-processing/inspection test.
Do not assume that visually similar Cognex VPM boards are interchangeable. The VPM-4114-00, VPM-4114-01 and other VPM families have different configurations, so the complete part number should be matched before replacement. The VPM-4114-00, for example, is separately identified as a Cognex 4100-series VME vision controller.
Inspection & Testing
For a replacement or spare board, inspection should include:
- PCB condition and connector inspection
- Verification of model and revision markings
- Check for damaged components or corrosion
- VME connector inspection
- Power-up diagnostic check
- Host-system communication test
- Vision application startup test
- Image acquisition and processing test where the appropriate test system is available
A full functional test is best performed in the original or compatible Cognex 4100-series system because standalone testing may not verify all system-level functions.
Important Compatibility Note
Several identifiers appear in market and service references for this board family, including:
- VPM-4114-01
- 200-0029S
- VM14
- 203-0028-RC
- 801-4102-02 C
These references should be treated as related identification numbers, not automatically interchangeable part numbers. Confirm the markings on your existing board before ordering.
FAQ
Q: What is the COGNEX VPM-4114-01?
A: It is a Cognex 4100-series VME vision processor/controller board used in industrial machine-vision equipment.
Q: Is it a camera itself?
A: No. It is a processing/controller PCB rather than an imaging camera.
Q: What is VM14?
A: VM14 is associated with the VPM-4114 vision board family in equipment references.
Q: Is VPM-4114-00 the same as VPM-4114-01?
A: They belong to the same general 4100-series family, but they should not be assumed to be direct substitutes. Match the complete part number and revision.
Q: Can this board be tested outside the original machine?
A: Basic PCB inspection is possible, but complete functional testing normally requires a compatible Cognex 4100-series/VME system and associated vision hardware.
Related Models
Related Cognex vision hardware includes:
- COGNEX VPM-4114-00
- COGNEX VPM-4214-00
- COGNEX VPM-4214-01
- COGNEX VME-4438-1MX
- COGNEX VPM-4338-00
- COGNEX VPM-3114
These are related Cognex vision-controller/processor products, not confirmed direct replacements for the VPM-4114-01.
Identification & Ordering Notes
When purchasing a replacement, please provide or verify:
- Complete model number
- PCB part number
- Revision letter/number
- Additional identification labels
- Connector configuration
- Existing system or equipment model
For this item, the most important identification is COGNEX VPM-4114-01. If your original board is marked with 200-0029S, VM14, 203-0028-RC, or 801-4102-02 C, these markings should be compared with the actual board before installation.
Recommended eBay Title
COGNEX VPM-4114-01 | 4100 Series VME Vision Processor Board
