Description
📌 Product Overview
The DEIF CM-2 1044220190G is a control circuit module associated with DEIF marine automation and Delomatic control systems. The same part number is also identified in listings as a DEIF Delomatic CM-2 Control Module and PCB card, making it a suitable spare-part candidate for maintenance of compatible legacy DEIF control installations.
The CM-2 is intended for system-level control and processing within the applicable DEIF controller architecture. Because the exact hardware configuration and installed software can vary by system, the complete part number and existing controller configuration should be matched before replacement.
🔧 Key Features
- Model: CM-2
- Part Number: 1044220190G
- DEIF control circuit module
- Associated with DEIF Delomatic control systems
- PCB-based control architecture
- Designed for marine and generator automation applications
- Suitable for legacy-system maintenance and replacement
- Supports system-level control functions within the compatible DEIF platform
- Compact replacement module for existing installations
- Useful as a maintenance spare for discontinued or older control systems
📊 Datasheet
| Parameter | Specification |
|---|---|
| Brand | DEIF |
| Model | CM-2 |
| Part Number | 1044220190G |
| Product Name | POS Control Circuit Module |
| Product Type | Control Module / PCB Card |
| Series | DEIF Delomatic / Marine Control System |
| Main Function | Control and system processing |
| Application | Marine & Generator Automation |
| Controller Platform | DEIF Delomatic Control System |
| Condition | New Open Box |
| Dimensions | Verify actual module before installation |
| Weight | Verify actual unit |
| Power Supply | System-dependent; verify existing controller specification |
⚙️ Control & System Integration
The CM-2 is used as part of a larger DEIF control architecture rather than as an independent controller.
In an existing installation, the module may work together with other controller boards, I/O sections, communication interfaces and power/control assemblies. Correct replacement therefore depends on matching:
- Controller model
- Hardware revision
- Part number
- Software/application configuration
- Connector arrangement
- Existing wiring
- System-specific parameter settings
For maintenance projects, retaining the exact 1044220190G part number is recommended.
⚓ Typical Applications
The DEIF CM-2 is suitable for maintenance of compatible:
- Marine generator control systems
- Diesel generator automation
- Shipboard power management systems
- Generator synchronization systems
- Load-sharing installations
- Engine control systems
- Marine electrical automation
- Delomatic-based control systems
- Legacy DEIF automation cabinets
- Ship-repair and retrofit projects
🔌 Replacement & Integration
When replacing a CM-2 module, first isolate the controller according to the vessel or plant maintenance procedure.
Recommended replacement sequence:
- Record the existing module part number and hardware markings.
- Confirm 1044220190G before removing the installed board.
- Photograph or document connector positions and wiring.
- Power down and isolate the associated control system.
- Remove the existing CM-2 carefully using appropriate ESD precautions.
- Inspect connectors, sockets and PCB contacts.
- Install the replacement module in the same position.
- Restore connections according to the original wiring arrangement.
- Apply power and check controller diagnostics.
- Verify generator/control functions before returning the system to normal operation.
🛠️ Maintenance Notes
Because the CM-2 can form part of a legacy control system, troubleshooting should consider the complete controller rather than the PCB alone.
If the system does not start correctly after replacement, check:
- Supply voltage
- Connector seating
- Backplane or internal connections
- Controller communication
- I/O module status
- Software compatibility
- Alarm and diagnostic indications
- Stored configuration or parameter settings
Avoid swapping modules between different DEIF controller configurations unless compatibility has been confirmed.
❓ Frequently Asked Questions
Q1: What is the DEIF CM-2 1044220190G?
It is a DEIF control module/PCB associated with Delomatic and marine automation control systems.
Q2: Is 1044220190G the correct part number?
Yes. The supplied listing identifies 1044220190G as the MPN for the CM-2 module.
Q3: Is this a PLC module?
It is better described as a DEIF control circuit module or PCB card within a dedicated marine automation/control architecture rather than a general-purpose PLC I/O module.
Q4: What systems can use the CM-2?
It is associated with DEIF Delomatic and related marine generator/control systems. Exact compatibility should be checked against the installed controller.
Q5: What is the condition of this item?
The referenced listing specifies New – Open Box and describes the item as like new, unused and in mint condition, without the original box.
Q6: Can the CM-2 be installed directly into any DEIF system?
No. The controller platform, hardware revision, wiring, software and configuration should be verified before installation.
Q7: Is the CM-2 suitable as a marine spare part?
Yes. Its association with DEIF marine control and Delomatic systems makes it a relevant replacement spare for compatible shipboard automation equipment.
🔄 Recommended DEIF Models
- DEIF CM-2 – 1044220190G Control Module
- DEIF Delomatic 3 CM-2 – 1044220190G PCB Card
- DEIF Delomatic 3 Control Module
- DEIF Delomatic 4 Control Module
- DEIF PPM 300 – Power Management Controller
- DEIF PCM3.1 – Processor & Communication Module
- DEIF PSM3.1 – Power Supply Module
- DEIF AGC 200 – Advanced Generator Controller
- DEIF AGC 150 – Generator Controller
- DEIF Multi-Line 300 Controller Module
📦 Spare-Part Recommendation
For vessels and generator installations still using compatible DEIF Delomatic equipment, keeping one CM-2 1044220190G as a controlled spare can help reduce downtime during PCB failure or planned maintenance. Before purchasing or installing a replacement, always compare the complete part number, hardware markings, controller platform and existing system configuration.
