Description
⚙️ Product Overview
The ELECTROLUX EWD700ZC is an inverter motor control board identified by part number 471 9792 04-05. It is used as a motor controller module in compatible Electrolux/Wascomat equipment and is designed to manage motor-related control functions within the machine’s electrical system.
The module is also identified with the DME46/21 controller designation. Available technical references identify connections including Motor Out X312, Mcom X301, and P-Bus X302, making the correct connector arrangement and system compatibility important when replacing an existing module.
🔧 Application & Integration
The EWD700ZC motor controller interfaces with the machine’s control architecture and motor circuit. During replacement, technicians should compare the existing board’s part number, connector locations, controller designation, and wiring before installation.
The module should be installed only in equipment designed for the 471 9792 04-05 / EWD700ZC configuration. After installation, verify motor-control wiring, communication connections, fault indications, and machine operation before returning the equipment to service.
📋 Product Datasheet
| Parameter | Value |
|---|---|
| Brand | ELECTROLUX |
| Model | EWD700ZC |
| Series | EWD700ZC / DME46/21 |
| Product Name | Inverter Motor Control Board |
| Part Number | 471 9792 04-05 |
| Controller Reference | DME46/21 |
| Motor Output | X312 |
| Communication / Control Ports | Mcom X301 / P-Bus X302 |
| Weight | Approx. 1.790 kg |
| Condition / Status | New – Open box |
⚡ Key Features
- Electrolux EWD700ZC motor control module
- Part number 471 9792 04-05
- DME46/21 controller identification
- Motor output connection X312
- Mcom X301 interface
- P-Bus X302 interface
- Designed for inverter-based motor control applications
- Suitable for replacement and maintenance stock
- Approximate weight: 1.790 kg
🛠️ Installation & Maintenance
Before replacing the controller, disconnect the equipment from its electrical supply and follow the machine’s service procedures. Record the existing wiring and connector positions before removing the original module.
Inspect the board and connectors for contamination, oxidation, loose terminals, or physical damage. Confirm that the replacement part number matches the existing configuration. After installation, check the control-system connections and perform a controlled operational test of the motor.
For spare-stock storage, keep the board in a clean, dry, static-protected environment. Avoid unnecessary handling of exposed electronic components.
❓ FAQ
Q: What is the part number of this Electrolux board?
A: The part number is 471 9792 04-05.
Q: What equipment is the EWD700ZC associated with?
A: It is a motor controller used in compatible Electrolux/Wascomat equipment.
Q: What controller designation is associated with this module?
A: The module is identified with the DME46/21 designation.
Q: What connections are associated with the module?
A: Available references identify Motor Out X312, Mcom X301, and P-Bus X302.
Q: What is the approximate weight?
A: The listed module weighs approximately 1.790 kg.
Q: Is this suitable as a replacement part?
A: Yes, provided the existing equipment uses the same EWD700ZC / 471 9792 04-05 configuration and the connector and system requirements are confirmed.
⭐ Related ELECTROLUX Models & Modules
- ELECTROLUX EWD700ZC
- ELECTROLUX DME46/21
- ELECTROLUX 471 7797 11.00
- ELECTROLUX 471 46 73 03
- ELECTROLUX 471 46 74 33
- ELECTROLUX 438955511
- ELECTROLUX AA5160044000
- ELECTROLUX 673611U01
- ELECTROLUX 471979204
- ELECTROLUX EWD700ZC Motor Controller Module
