Description
🖥️ Product Overview
The EMERSON IC755CSW07CDA is a 7-inch QuickPanel+ View and Control operator interface terminal designed for industrial automation, machine control, and HMI applications.
The unit combines an operator interface and embedded control platform in one compact device. It uses a 7-inch widescreen TFT LCD with an 800 × 480 WVGA resolution and a projected capacitive two-point multi-touch touchscreen.
The IC755CSW07CDA is built around a 1 GHz ARM Cortex-A8 processor and uses Microsoft Windows Embedded Compact 7. Its integrated Ethernet, serial, USB, SD card, and multimedia interfaces allow the terminal to communicate with industrial automation equipment while providing visualization, operator control, and data access functions.
The QuickPanel+ platform is intended to reduce the need for separate HMI and control hardware in suitable automation systems.
⚙️ Key Features
🔹 7-inch widescreen industrial touchscreen
🔹 800 × 480 WVGA display resolution
🔹 Projected capacitive touchscreen
🔹 Two-point multi-touch operation
🔹 Freescale i.MX535 1 GHz ARM Cortex-A8 processor
🔹 512 MB DDR2 SDRAM
🔹 256 MB SLC NAND Flash memory
🔹 512 KB battery-backed SRAM
🔹 Microsoft Windows Embedded Compact 7
🔹 10/100BaseT Ethernet communication
🔹 RS-232 serial communication
🔹 Two USB 2.0 host ports
🔹 One USB 2.0 Mini Type-B device port
🔹 SD/SDHC memory card support
🔹 24 VDC industrial power supply
🔹 Integrated HMI and control functionality
📋 Product Datasheet
| Parameter | Specification |
|---|---|
| Brand | EMERSON |
| Model | IC755CSW07CDA |
| Product Series | QuickPanel+ |
| Product Name | View and Control Operator Interface Terminal |
| Display Size | 7 inch |
| Display Type | Widescreen TFT LCD |
| Display Resolution | 800 × 480 pixels WVGA |
| Display Colors | 65,536 colors |
| Brightness | Approx. 310 cd/m² |
| Touchscreen Type | Projected Capacitive |
| Multi-Touch | Two-point |
| Processor | Freescale i.MX535 |
| CPU Speed | 1 GHz |
| CPU Architecture | ARM Cortex-A8 |
| RAM | 512 MB DDR2 SDRAM |
| Flash Memory | 256 MB SLC NAND |
| Retentive Memory | 512 KB Battery-Backed SRAM |
| Operating System | Microsoft Windows Embedded Compact 7 |
| Ethernet | 1 × 10/100BaseT RJ45 |
| Serial Port | 1 × RS-232 UART |
| USB Host | 2 × USB 2.0 Type-A |
| USB Device | 1 × USB 2.0 Mini Type-B |
| Storage | 1 × SD/SDHC Card Slot |
| Audio Input | 1 × Microphone Input |
| Audio Output | 1 × Stereo Line Output |
| Rated Voltage | 24 VDC ±20% |
| Maximum Power Consumption | 15 W |
| Maximum Current | Approx. 0.625 A |
| Dimensions | Approx. 192 × 137 × 36 mm |
| Panel Cutout | Approx. 183.5 × 128.5 mm |
| VESA Mount | 75 × 75 mm |
| Weight | Approx. 0.8 kg |
| Operating Temperature | 0°C to +55°C |
| Storage Temperature | -10°C to +60°C |
| Humidity | Up to 85% RH, Non-Condensing |
| Front Protection | IP65 in Panel Mount |
| Application | Industrial HMI and Embedded Control |
| Country of Origin | Verify from Product Nameplate |
| Condition | Verify Actual Item Condition |
The published QuickPanel+ specifications for IC755CSW07CDA identify the 1 GHz ARM Cortex-A8 processor, 512 MB RAM, 7-inch 800 × 480 display, projected capacitive two-point touchscreen, 24 VDC supply, 15 W maximum consumption, dimensions, and 0.8 kg weight.
🔄 Operating Function
The IC755CSW07CDA combines visualization and control functions within one industrial terminal.
A typical application structure is:
Operator → QuickPanel+ Touchscreen → Embedded Control / Communication → PLC, PAC, Drives or Field Devices
The operator can use the touchscreen to monitor machine status, view alarms, change operating parameters, and issue commands.
The integrated communication interfaces allow the QuickPanel+ to exchange information with industrial automation equipment. Depending on the installed application and system architecture, the terminal can be used for machine visualization, process monitoring, alarm handling, data access, and control functions.
The QuickPanel+ platform is designed as an all-in-one industrial operator interface with embedded computing and communication capability.
🛠️ Installation and Configuration
Before installing a replacement terminal, compare the complete model number and hardware configuration.
Recommended checks include:
- Confirm the model number IC755CSW07CDA.
- Verify the existing HMI application and backup the project.
- Check the 24 VDC power supply.
- Confirm Ethernet network settings.
- Verify RS-232 communication parameters.
- Inspect the SD card and application storage if used.
- Check the touchscreen and display condition.
- Confirm the panel cutout dimensions.
- Inspect the mounting gasket.
- Verify the correct grounding arrangement.
- Check the installed firmware and operating system version.
- Perform a communication test before returning the machine to production.
The terminal should be installed in a well-ventilated enclosure and protected from excessive dust, corrosive gases, liquids, and direct environmental exposure.
🔍 Maintenance Tips
🧹 Keep the touchscreen surface clean and avoid abrasive cleaning materials.
🔌 Inspect the Ethernet, RS-232, USB, and power connectors for looseness or contamination.
💾 Maintain a backup of the HMI and control application before replacing the terminal.
🔋 Check the condition of the battery-backed memory system during scheduled maintenance.
🌡️ Monitor enclosure temperature to keep the terminal within its specified operating range.
📡 Check network communication if the display appears normal but machine data is not updating.
🖐️ Test touchscreen response across the entire display area.
💡 Watch for reduced display brightness or backlight-related diagnostic indications.
For long-term spare storage, keep the terminal in suitable protective packaging and protect connectors and the touchscreen from mechanical damage.
❓ Frequently Asked Questions
Q: What is the EMERSON IC755CSW07CDA?
A: It is a 7-inch QuickPanel+ industrial View and Control operator interface terminal with touchscreen, embedded computing, and industrial communication functions.
Q: What is the display resolution?
A: The display resolution is 800 × 480 pixels in WVGA format.
Q: Does the terminal support multi-touch?
A: Yes. The IC755CSW07CDA uses a projected capacitive touchscreen with two-point multi-touch capability.
Q: What power supply is required?
A: The unit operates from 24 VDC ±20%, with a maximum power consumption of approximately 15 W.
Q: Does it have Ethernet communication?
A: Yes. It includes one 10/100BaseT RJ45 Ethernet interface.
Q: Does it support serial communication?
A: Yes. The terminal includes an RS-232 UART communication port.
Q: Can an SD card be used?
A: Yes. The IC755CSW07CDA includes an SD/SDHC card slot.
Q: Is this only an HMI display?
A: No. The QuickPanel+ View and Control platform combines operator-interface functions with embedded control and computing capabilities.
Q: Can it directly replace another QuickPanel+ model?
A: Not automatically. Display size, bezel type, application compatibility, communication configuration, firmware, and physical mounting dimensions should all be checked before replacement.
🔄 Recommended EMERSON QuickPanel+ Models
- EMERSON IC755CSW07CDA – QuickPanel+ 7-inch View and Control Terminal
- EMERSON IC755CBW07CDA – QuickPanel+ 7-inch View and Control Terminal
- EMERSON IC755CSS06CDA – QuickPanel+ 6-inch Operator Interface
- EMERSON IC755CSS07CDA – QuickPanel+ 7-inch Operator Interface
- EMERSON IC755CSS10CDA – QuickPanel+ 10-inch Operator Interface
- EMERSON IC755CSS12CDA – QuickPanel+ 12-inch Operator Interface
- EMERSON IC755CSS15CDA – QuickPanel+ 15-inch Operator Interface
- EMERSON IC755CSW07CDACA – QuickPanel+ 7-inch Conformal-Coated Terminal
- EMERSON IC755ACC07GAS – QuickPanel+ Replacement Gasket
- EMERSON IC755ACCBATT – QuickPanel+ Replacement Battery Pack
Exact compatibility between models should be verified before substitution because hardware options, bezel configurations, display sizes, and application requirements may differ. Emerson’s current QuickPanel+ documentation continues to provide support resources and firmware information for the product family.
🏭 Application Summary
The EMERSON IC755CSW07CDA is a compact industrial QuickPanel+ terminal for applications requiring operator visualization and integrated control capability.
Its 7-inch multi-touch display, ARM-based processor, Ethernet, RS-232, USB interfaces, SD card support, and 24 VDC power design make it suitable for industrial machines, packaging equipment, production systems, material-handling equipment, and other automation applications.
For replacement work, match the complete IC755CSW07CDA model number, bezel version, HMI application, firmware, communication settings, and panel dimensions before installation. The official Emerson QuickPanel+ datasheet is available here:
