Description
The EPRO MMS6410 is a two-channel monitoring module from the MMS 6000 machinery monitoring system, designed for measurement and monitoring applications using inductive displacement transducers. The module can operate its two channels independently or configure them for addition/subtraction measurement functions. Each channel provides a configurable 0/4–20 mA characteristic-value output for connection to associated control, monitoring, or supervisory systems.
The MMS6410 uses the standard Eurocard format and is designed for installation in compatible 19-inch monitoring racks and Intermas-compatible enclosures. Its electrical connection is made through a 48-pin DIN 41612 Form F connector. This makes the module suitable for maintenance and replacement work on existing EPRO MMS 6000 installations where the original board or monitor is no longer available.
The supplied item is identified as Type 9100-00005. The listing indicates brand-new condition. Buyers should verify the exact type designation, hardware revision, rack configuration, sensor arrangement, and system documentation before installation.
MMS6410 9100-00005
🔹 Product Keywords
EPRO MMS6410, 9100-00005, MMS 6410, EPRO Vibration Monitoring Board, MMS 6000, Vibration Monitoring Module, Displacement Monitor, Inductive Displacement Transducer, Machinery Monitoring, Machinery Protection, Eurocard Monitoring Module
🔹 Product Datasheet
| Parameter | Specification |
|---|---|
| Brand | EPRO |
| Model | MMS6410 |
| Type / Part No. | 9100-00005 |
| Product Type | Vibration / Displacement Monitoring Module |
| Series | MMS 6000 |
| Measurement Channels | 2 channels |
| Measurement Principle | Inductive displacement transducer monitoring |
| Analog Output | 0/4–20 mA per channel |
| Board Format | Eurocard, 100 × 160 mm |
| Front Panel Width | 6 HP, approx. 30 mm |
| Connector | 48-pin DIN 41612 Form F |
| Installation | Compatible 19-inch / Intermas-type rack systems |
| Origin | Germany |
| Condition | Brand New |
🔹 System Integration
The MMS6410 is intended for integration into EPRO MMS 6000 monitoring systems for machinery measurement and condition-monitoring applications. The two channels may be used independently or configured for mathematical combinations such as addition or subtraction. Its analog outputs can provide measurement values to compatible monitoring, control, recording, or supervisory equipment.
When replacing an existing MMS6410, confirm the complete 9100-00005 type designation and the installed rack/backplane configuration. Sensor type, channel configuration, calibration, wiring, and system configuration should be checked before commissioning. EPRO documentation also notes that MMS 6000 monitor electronics can require factory calibration, so board-level replacement should follow the applicable service documentation.
For additional industrial automation and vibration-monitoring spare parts, visit New PLC DCS automation spare parts.
🔹 10 Related EPRO / MMS Models
- EPRO MMS6110 Vibration Monitoring Module
- EPRO MMS6120 Vibration Monitoring Module
- EPRO MMS6210 Vibration Monitoring Module
- EPRO MMS6220 Vibration Monitoring Module
- EPRO MMS6310 Speed Monitoring Module
- EPRO MMS6312 Speed Monitoring Module
- EPRO MMS6410 Displacement Monitoring Module
- EPRO MMS6815 Vibration Monitoring Module
- EPRO MMS6910 Configuration Software
- EPRO MMS6000 Monitoring System
Compatibility Note: Related MMS 6000 modules are not automatically interchangeable. Always match the measurement function, sensor type, rack position, connector configuration, and system documentation before substitution.
