Description
Technical Parameters
| Feature | Specification |
|---|---|
| Brand | Flowserve Limitorque |
| Part Number | MX 64-825-0071-3 |
| Component Type | Power Supply / Main Logic Board |
| Series | MX Series Actuator |
| Input Voltage | 110V/220V AC (System Dependent) |
| Frequency | 50/60 Hz |
| Board Revision | Standard Industrial Grade |
| Compatibility | Limitorque MX-05 through MX-150 |
Product Datasheet
| Attribute | Details |
|---|---|
| Dimensions | 215mm x 140mm x 45mm |
| Weight | 0.85 kg |
| Country of Origin | USA / Mexico |
| Material | Multi-layer PCB with Protective Coating |
| Operating Temperature | -40°C to +85°C |
| Humidity | 0-95% Non-condensing |
Application Fields
The MX 64-825-0071-3 power board is specifically engineered for Flowserve Limitorque MX series multi-turn electric actuators. It is widely utilized in:
- Oil and Gas pipelines for valve automation.
- Power Generation facilities (Conventional and Nuclear).
- Water and Wastewater treatment plants.
- Chemical processing plants requiring precise torque and position control.
Product Instructions
- Safety Precautions: Ensure all power sources are disconnected before attempting to install or replace the power board to prevent electrical shock or damage to the actuator electronics.
- Installation: Align the board correctly with the internal guide rails and ensure all pin connectors are seated firmly. Use anti-static wrist straps during handling.
- Configuration: After installation, perform a system self-test via the actuator display to verify communication between the MX 64-825-0071-3 and the control module.
- Maintenance: Periodically check for signs of thermal stress or oxidation on connector points, especially in high-vibration environments.
Q&A Section
Q1: Can this board be used across different MX actuator sizes? A1: Yes, the MX 64-825-0071-3 is designed as a modular component compatible with various frame sizes within the Limitorque MX series.
Q2: What is the primary function of this specific board? A2: It serves as the primary power distribution interface, converting incoming line voltage to the regulated DC power required by the actuator’s internal logic and motor control circuits.
Q3: How do I identify a failure in the power board? A3: Common indicators include a blank actuator display despite active line power, or “Control Power Loss” alarms triggered by the diagnostic system.
Recommended Similar Models
- FLOWSERVE MX 64-825-0010-1
- FLOWSERVE MX 64-825-0024-4
- FLOWSERVE MX 64-825-0045-2
- FLOWSERVE MX 64-825-0080-1
- FLOWSERVE MX 64-825-0092-3
