Description
The GE 8619-FT-MT VER:GEF02 Rev.A is a specialized mass termination assembly designed for industrial automation and control system architectures. Featuring a 44-pin configuration, this termination module serves as a reliable interface component that connects field wiring to control hardware safely and efficiently. It is built to support rugged industrial environments, process control systems, and original equipment manufacturer (OEM) machinery.
📊 Technical Specifications
- Brand: GE (General Electric)
- Model: 8619-FT-MT
- Series: Field Terminal / Mass Termination (Div 2)
- Product Name: Mass Termination Assembly 44 Pin
- Origin/Version: VER:GEF02 Rev.A
- Manufacturing Status: Mature / Legacy Industrial Spare Part
- Dimensions: Standard modular DIN-rail / panel-mount footprint
- Weight: Approx. 0.3 kg – 0.5 kg
- Country of Origin: USA / Global Manufacturing Standards
- Power Requirements: Passive terminal pass-through (no direct internal power supply required)
- Pin Count: 44-Pin Mass Termination Interface
🛠️ Operation Guidelines & Installation
Installation should be carried out exclusively by certified technicians familiar with industrial control wiring. Before mounting or connecting cables, ensure that all relevant system power and field loops are completely de-energized to prevent electrical shock or equipment damage. Secure the assembly firmly onto its designated mounting base or rail inside the industrial cabinet. Align the 44-pin mass termination cable connector precisely to avoid bending pins, and tighten retention screws securely. Inspect all connected field wires to guarantee firm contact and prevent intermittent signal transmission.
🔌 Power-Up and Power-Down Sequence
Because the 8619-FT-MT is a passive termination and signal-routing assembly rather than an active powered device, it does not execute a standalone boot sequence. During system power-up, ensure all field terminal connections are verified before energizing the connected I/O cards and controllers. For system shutdown or maintenance, power down the active I/O modules and associated field power supplies first, then disconnect or service the mass termination cabling to protect sensitive control hardware.
📝 Product Usage Instructions
This assembly is engineered to bundle and route multi-channel signals cleanly between field devices and control system input/output modules. Keep the module clean, dry, and free from corrosive dust or moisture accumulation. Periodically inspect the 44-pin connector interface and screw terminals for signs of mechanical wear, looseness, or thermal oxidation. Always use proper cable management techniques to avoid placing undue physical strain on the 44-pin ribbon or multi-core cable assembly.
❓ Common Questions (Q&A)
Q: What should I check if a signal channel fails through the termination assembly?
A: First, inspect the 44-pin connector to ensure it is fully seated and thumb-screws or latches are secure. Second, check individual wire terminations on the terminal blocks for continuity and correct torque.
Q: Can this assembly be installed in hazardous locations?
A: Yes, this model is typically rated for Division 2 hazardous area applications depending on your specific system installation guidelines and cabinet enclosures.
Q: Does the module require firmware updates or configuration?
A: No, the unit is a passive hardware termination component and does not contain programmable logic or firmware.
🚀 Recommended Related Models
- GE 8618-FT-MT (16-pin Mass Termination Assembly)
- GE 8601-FT-NI (Field Terminal, Non-Incendive Div 2)
- GE 8602-FT-ST (Standard Field Terminal)
- GE 8603-FT-FU (Fused Non-Incendive Field Terminal)
- GE 8605-FT-TC (Thermocouple Field Terminal)
- GE 8606-FT-RT (RTD Field Terminal)
- GE 8617-FT-NI (Field Terminal for 16-channel DI)
- GE 8620-FT-MT (Field Terminal Assembly Alternative)
- GE 8621-FT-IS (Intrinsically Safe Standard Field Terminal)
- GE 8811-IO-DC (8-Channel Safety DI/DO Module)
