Description
The GE DS200SHVIG1B (SHVI) is a High Voltage Interface Card developed by General Electric for the Mark V Speedtronic and EX2000 industrial drive series. It is engineered to monitor, condition, and interface high-voltage DC bus and AC line voltages safely with the low-voltage control and feedback processing circuits.
📋 Technical Specifications Datasheet
- Brand: GE (General Electric)
- Model: DS200SHVIG1B (Functional Acronym: SHVI)
- Series: Mark V / EX2000 Drive Control Series
- Product Name: High Voltage Interface Card / High-Voltage Feedback Board
- Manufacturing Origin: United States
- Product Status: Industrial Control Standard / Replacement Part
- Dimensions: Standard Mark V / EX2000 printed circuit board form factor
- Weight: Approximately 0.45 kg
- Compatibility Note: Designed to work seamlessly alongside companion control and feedback boards such as the DS200SDCIG1AFB (SDCI).
- Power Rating: Low-voltage internal logic power powered via drive backplane / power supply feeds
⚙️ Operating Norms and Usage
- Observe strict electrostatic discharge (ESD) safety protocols, utilizing a properly grounded wrist strap when handling the printed circuit board.
- Mount the board securely within its designated drive cabinet slot or rack assembly, ensuring firm physical engagement with backplane connectors and plug-in wiring headers.
- Verify all high-voltage sensing leads, plug-in connectors, and terminal screws against system schematics prior to system energization.
⚡ Power-On / Power-Off Sequence
- Power-On Sequence: Confirm all cabinet doors are closed and interlocks are active, energize auxiliary control logic supplies, verify initial diagnostic indicators, and then apply main high-voltage DC/AC bus power.
- Power-Off Sequence: Issue software stop commands to de-energize the drive system, lock out main high-voltage power feeds, allow internal DC bus capacitors to fully discharge, and verify zero energy state before servicing.
📖 Product Usage Instructions
- Continuously monitor drive diagnostic displays and system HMI status to track high-voltage feedback stability and bus measurement accuracy.
- Inspect connector pins, ribbon cables, and onboard components periodically for dust accumulation, oxidation, or thermal wear.
- Reference authorized GE Mark V / EX2000 service manuals when performing diagnostic calibration or troubleshooting voltage feedback faults.
❓ Common Questions & Answers Q&A
- O: What is the primary function of the DS200SHVIG1B card?
A: It safely steps down and conditions high-voltage DC bus and AC line signals into safe, low-level feedback voltages required by the drive controller processors.
- Q: Is this card compatible with the DS200SDCIG1AFB board?
A: Yes, the DS200SHVIG1B is designed to operate cooperatively within drive feedback and control architectures that utilize companion boards like the DS200SDCIG1AFB (SDCI).
Recommended Alternative Series & Models
- GE Drive Board: DS200SDCIG1AFB (SDCI Board)
- GE Drive Board: DS200IQXDG1A
- GE Drive Board: 531X301DCCAFG2
- GE Terminal Board: 531X305NTBAPG1
- GE Control Board: DS200TBCIG1AAB
- GE Control Board: DS200TCQBG1B
- GE Control Board: DS200PCCAG1ACC
- GE Mark VIe Module: IS420UCSCH1A
- GE Power Supply: IS200EPDMH1AAA
- GE Multilin Relay: SR750-P1-G1-S1-HI-A20-R-E-H
