Description
🔹 Product Description
The General Electric DS200SIOCG1A, with the extended assembly number DS200SIOCG1AEA, is a VME Stand I/O Board associated with the GE Mark V turbine control platform. The board is designed for industrial turbine control and I/O signal interface applications. Available technical references identify five terminal blocks, supporting up to 33 signal wires, together with one fuse and four 2-pin connectors. The board uses factory terminal identification to assist with field-wiring maintenance and replacement. Because the complete DS200SIOCG1AEA identification represents a specific hardware revision and configuration, the full part number should be checked carefully before installation or replacement.
📋 Product Datasheet
| Parameter | Value |
|---|---|
| Brand | General Electric (GE) |
| Model | DS200SIOCG1A |
| Extended Model | DS200SIOCG1AEA |
| Series | Mark V / DS200 |
| Product Name | VME Stand I/O Board |
| Place of Manufacture | USA |
| Product Status | Legacy / Surplus |
| Dimensions | Approx. 3.2 × 10.7 × 13 cm |
| Weight | Approx. 0.3 kg |
| Power | System/backplane supplied |
| Discontinued | Yes – Legacy Mark V hardware |
⚙️ Key Features
• VME-format industrial control PCB
• Associated with the GE Mark V turbine control platform
• Five terminal blocks for field signal wiring
• Supports up to 33 signal wires
• One onboard protective fuse
• Four 2-pin connectors
• Clearly identified terminal positions for wiring maintenance
• Designed for industrial turbine control and I/O applications
• DS200SIOCG1AEA represents a specific revision/configuration
• Suitable for replacement, maintenance, and spare-parts inventory
❓ Common Questions & Answers
Q: What is the DS200SIOCG1A?
A: It is a GE VME Stand I/O Board associated with the Mark V turbine control system.
Q: What is the difference between DS200SIOCG1A and DS200SIOCG1AEA?
A: DS200SIOCG1A is the base board designation, while DS200SIOCG1AEA identifies a more specific assembly/revision configuration. The complete number should be matched when ordering a replacement.
Q: How many terminal blocks are on the board?
A: Technical references identify five terminal blocks designated TB-1 through TB-5.
Q: How many signal wires can the board support?
A: The available specifications identify a maximum of 33 signal wires across the five terminal blocks.
Q: Does the board contain a fuse?
A: Yes. The board includes one protective fuse intended to help protect the circuitry from overcurrent conditions.
Q: Is this board part of the Mark V system?
A: Yes. The DS200SIOCG1A family is listed within the GE Mark V DS200 product family.
Q: Can different revisions be substituted directly?
A: Direct substitution should not be assumed. The complete board number, revision, terminal arrangement, wiring, and system configuration should be verified before replacement.
Q: What should be checked before removing the existing board?
A: Record the terminal identifiers and corresponding field wires, verify the complete replacement part number, and follow the applicable Mark V maintenance and electrical safety procedures.
⭐ Recommended GE Models
- DS200SIOBG1AAA — Mark V VME I/O Board
- DS200SIOBH1 — VME Stand I/O Card
- DS200SIOBH1A — SC2000 VME I/O Board
- DS200SIOBH1AAA — VME I/O Module
- DS200SIOBH1ABA — VME Stand I/O Board
- DS200SLCCG1 — LAN Communication Card
- DS200SLCCG1A — LAN Communications Card
- DS200SLCCG1AAA — Mark V LAN Communication Card
- DS200SLCCG1ABA — LAN Communication Control Card
- DS200SLCCG1ABB — LAN Communication Module
- DS200SLCCG1ACC — Turbine Control Communication Card
- DS200SHVMG1AFE — SCR High Voltage Interface Board
- DS200SHVMG1AGE — SCR High Voltage M-Frame Interface Board
- DS200SDCCG1A — Mark V Drive Control Card
- DS200SDCCG1AFG — Mark V Drive Control Board
