Description
🔹 Product Description
The General Electric DS200TCCAG1B, with the extended board identification DS200TCCAG1BAA, is a Common Analog I/O Board used in the GE Mark V turbine control system. The board is designed to condition and process multiple analog signal types, including 4–20 mA signals, RTD inputs, thermocouple inputs, shaft voltage, and shaft current signals. The board uses an 80196 microprocessor, multiple PROM devices, a programmable logic device, one diagnostic LED, and two 50-pin connectors identified as JCC and JDD. It also includes three hardware jumpers for RS-232, oscillator, and factory-test functions.
📋 Product Datasheet
| Parameter | Value |
|---|---|
| Brand | General Electric (GE) |
| Model | DS200TCCAG1B |
| Extended Model | DS200TCCAG1BAA |
| Series | Mark V DS200 / TC2000 |
| Product Name | Common Analog I/O Board |
| Place of Manufacture | USA |
| Product Status | Legacy / Surplus |
| Dimensions | Approx. 16 × 16 × 12 cm |
| Weight | Approx. 1.11 lb / 0.50 kg |
| Power | System/backplane supplied |
| Discontinued | Yes – Legacy Mark V hardware |
⚙️ Key Features
• Designed for GE Mark V turbine control systems
• TC2000 Common Analog I/O functionality
• 80196 microprocessor
• Multiple removable PROM modules
• Programmable logic device
• One diagnostic LED
• Two 50-pin connectors: JCC and JDD
• Three hardware jumpers: J1, JP2, and JP3
• Interfaces with CTBA, TBQA, and TBCA terminal boards
• Handles analog signals including 4–20 mA, RTD, thermocouple, shaft voltage, and shaft current signals
❓ Common Questions & Answers
Q: What is the DS200TCCAG1B?
A: It is a GE Mark V Common Analog I/O Board, also known as the TC2000 Analog I/O Board.
Q: What is the full board number?
A: The base model is DS200TCCAG1B, while DS200TCCAG1BAA identifies a specific board configuration and revision.
Q: What types of signals can it process?
A: The board is associated with 4–20 mA inputs and outputs, RTD inputs, thermocouple inputs, shaft voltage, and shaft current signals.
Q: Which connectors are used for RTD signals?
A: The JCC and JDD connectors are associated with RTD input signals from the TBCA terminal board.
Q: What processor does the board use?
A: The DS200TCCAG1B uses an 80196 microprocessor.
Q: What are the three jumpers used for?
A: J1 controls the RS-232 port enable/disable function, JP2 is associated with oscillator selection for card testing, and JP3 is intended for factory testing.
Q: Which Mark V boards connect to the TCCA?
A: The board interfaces with associated CTBA, TBQA, and TBCA terminal boards, while conditioned data is transferred through the Mark V 3PL data bus.
Q: Is the DS200TCCAG1B discontinued?
A: The Mark V DS200 family is legacy hardware, and current technical listings identify this board as discontinued/obsolete.
Q: Can another DS200TCCA revision be used as a replacement?
A: Replacement should not be assumed to be direct. Verify the complete board number, revision, jumper configuration, terminal-board connections, I/O configuration, and Mark V system requirements before installation.
⭐ Recommended GE Models
- DS200TCCAG1A — TC2000 Analog I/O Board
- DS200TCCAG2A — Mark V Analog Control Board
- DS200TCCAG2B — Mark V I/O Analog Board
- DS200TCCBG1A — Extended Analog I/O Card
- DS200TCCBG1ALD — Extended Analog I/O Card
- DS200TBQDG1A — Mark V RST Termination Card
- DS200TBQDG1ACC — Extension Analog Termination Board
- DS200TBQEG1B — RST LM6000 Analog Module
- DS200TBQGG1A — Turbine Termination Card
- DS200TBSAG1A — LM Transducer Card
- DS200TBSAG1AAA — LM Transducer Board
- DS200SDCCG1A — Mark V Drive Control Board
- DS200SLCCG1A — Mark V LAN Communication Card
- DS200SIOCG1A — Mark V VME I/O Board
- DS200TCRAG1A — Mark V Thermocouple Input Board
