Description
The GE IC698PSA350E is a high-capacity 15-Amp AC/DC power supply module engineered specifically for the PACSystems RX7i and Series 90-70 modular automation platforms. It is designed to deliver robust, regulated power distribution directly to the rack backplane, supporting high-density processor configurations, intensive I/O modules, and demanding industrial control applications.
📋 Technical Specifications Datasheet
- Brand: GE Fanuc / Emerson Automation Solutions
- Model: IC698PSA350E (IC698PSA350 series variant)
- Series: PACSystems RX7i / Series 90-70 Platform
- Product Name: 15-Amp AC/DC Power Supply Module
- Manufacturing Origin: United States
- Product Status: Industrial Control Standard / Replacement Part
- Input Voltage Range: Wide-range AC or DC input flexibility (typically universal 85–264 VAC or 100–300 VDC)
- Output Current Capacity: 15 Amps at primary backplane voltage rails
- Mounting: Slot-mount module designed for the left-hand power supply slot of an RX7i or Series 90-70 rack
- Weight: Approximately 1.8 kg
⚙️ Operating Norms and Usage
- Observe standard electrostatic discharge (ESD) safety protocols, utilizing a properly grounded wrist strap when handling the power supply module.
- Insert the module securely into the designated power supply slot of the RX7i backplane, ensuring firm alignment with backplane connectors before tightening retention screws.
- Verify incoming line voltage, proper grounding connections, and terminal block screw torque against electrical safety and installation drawings prior to powering up.
⚡ Power-On / Power-Off Sequence
- Power-On Sequence: Confirm all wiring terminals and rack connections are secure, switch on the external AC/DC feed to the power supply, and observe front-panel diagnostic LED indicators (such as OK, Standby, and Overload) to verify stable output regulation.
- Power-Off Sequence: Isolate and switch off the incoming power source to the module, allow internal filter capacitors to fully discharge, and ensure zero energy state before servicing or extracting the unit.
📖 Product Usage Instructions
- Monitor front-panel diagnostic LED indicators regularly to ensure proper power supply health and backplane voltage stability.
- Ensure adequate cabinet ventilation and clearance around the power supply slot, as high-current 15-Amp units generate normal operating heat that requires passive or active enclosure cooling.
- Periodically inspect terminal wiring and screw terminals for signs of thermal stress, vibration looseness, or oxidation during routine plant maintenance intervals.
❓ Common Questions & Answers Q&A
- Q: What is the primary function of the IC698PSA350E power supply?
A: It converts incoming plant AC or DC voltage into the regulated low-voltage power required by the RX7i backplane, CPU, and high-density I/O modules.
- Q: Can this power supply be used in redundant configurations?
A: Yes, the RX7i platform supports dual power supply setups to provide high availability and load sharing for critical continuous processes.
Recommended Alternative Series & Models
- Emerson / GE PACSystems Controller: IC695CPE400
- Emerson / GE PACSystems CPU: IC695CPE330
- Emerson / GE PACSystems Backplane: IC695CHS012
- Emerson / GE Power Supply: IC695PSD040G
- GE Fanuc Bus Module: IC687BEM713
- GE Mark VIe Module: IS420UCSCH1A
- GE Mark VI Board: IS200TDBTH2A
- GE Drive Board: 531X301DCCAFG2
- GE Terminal Board: 531X305NTBAPG1
- GE Multilin Relay: SR750-P1-G1-S1-HI-A20-R-E-H
