Description
🔹 Product Overview
The GE Fanuc Automation VME7807RC, also identified as VME-7807RC / VMIVME-7807, is a high-performance 6U VMEbus Single Board Computer (SBC) designed for industrial embedded computing, control, test and measurement, and other VME-based systems. The board integrates an Intel Pentium M processor with the Intel 855GME chipset and a 400 MHz system bus. Processor configurations include 1.1 GHz, 1.4 GHz, and 1.8 GHz options, depending on the original ordering configuration.
The VME7807RC supports up to 1.5 GB DDR SDRAM and up to 2 GB bootable CompactFlash. It provides a PCI-X PMC expansion slot, VME64 backplane support through the Tundra Universe II interface, four serial ports, four USB 2.0 ports, Ethernet connectivity, SATA/IDE interfaces, and front-panel SVGA connectivity.
VME7807RC
The board uses a 6U, 4HP single-slot Eurocard form factor, making it suitable for compatible VME chassis and backplane systems. The documented power requirement is approximately +5 VDC at 4.0 A typical / 5.4 A maximum, with additional ±12 VDC requirements below 1 mA.
The V7807RC entered Abaco Systems’ Restricted Production Phase in 2010, so this model is primarily relevant today for legacy-system maintenance, replacement, and refurbishment. Exact processor speed, memory, CompactFlash configuration, PMC option, and I/O configuration should be matched to the original board before installation.
📋 Product Datasheet
| Parameter | Specification |
|---|---|
| Brand | GE Fanuc / VMIC / Abaco Systems |
| Model | VME7807RC / VME-7807RC |
| Product Type | VMEbus Single Board Computer |
| Processor | Intel Pentium M |
| Processor Options | 1.1 / 1.4 / 1.8 GHz |
| System Bus | 400 MHz |
| Memory | Up to 1.5 GB DDR SDRAM |
| VME Interface | Tundra Universe II / VME64 |
| Expansion | 1 × PCI-X PMC Slot |
| Ethernet | 10/100 + Dual Gigabit Ethernet options |
| Form Factor | 6U, 4HP, Single-Slot VME |
| Dimensions | Approx. 233.4 × 160 × 20.3 mm |
| Power | +5 VDC, 4.0 A typical / 5.4 A max |
| USB | 4 × USB 2.0 |
| Serial I/O | 4 × serial ports |
🔧 Product Keywords
GE Fanuc VME7807RC, VME-7807RC, VMIVME-7807, GE Fanuc 7807, VME 7807 SBC, Pentium M VME Computer, VMEbus Single Board Computer, 6U VME SBC, VME64 SBC, VME PCI-X PMC Board, Abaco V7807RC, VMIC VME Computer
❓ FAQ
Q1: What is the VME7807RC?
It is a 6U VMEbus single-board computer based on Intel Pentium M technology.
Q2: What processor does it use?
The VME7807RC family was offered with Intel Pentium M processors at 1.1 GHz, 1.4 GHz, or 1.8 GHz. The exact speed must be verified from the individual board.
Q3: How much memory is supported?
The platform supports up to 1.5 GB DDR SDRAM. Individual boards may have a lower installed capacity.
Q4: Does it support PMC expansion?
Yes. The VME7807RC provides one PCI-X PMC expansion slot.
Q5: What should be checked before replacement?
Match the complete model/ordering code, processor speed, installed memory, CompactFlash, PMC configuration, VME chassis, rear-transition-module arrangement, and system software requirements.
🔗 Industrial Automation Resources
For VME, PLC, DCS, embedded computer and industrial automation spare parts, visit New PLC DCS.
🔄 Related GE Fanuc / Abaco Models
- GE Fanuc VMIVME-7807
- GE Fanuc VME-7807RC
- Abaco V7807RC
- VMIVME-7750
- VMIVME-7700 Series
- VMIVME-7618
- VMIVME-7668
- VMIVME-7671
- Abaco V7768
- GE Fanuc VMEbus SBC Series
