Description
The GE General Electric DS200CDBAG1B, full assembly number DS200CDBAG1BBB, is a Contactor Driver Board designed for GE Mark V DS200 drive control applications. The CDBA board provides the interface between drive control circuitry and high-speed contactors, controlling the power required to open and close the contactor. It is used in compatible AC2000 and DC2000 drive systems and can provide coordinated contactor operation through the JP2 configuration. The board includes three test points, configurable hardware, a potentiometer for contactor coil current adjustment, three plug connectors, and a four-section terminal board identified as 1TBA, 1TBB, 1TBC, and 1TBD. The DS200CDBAG1BBB assembly carries B-rated functional and artwork revisions and is a legacy GE Mark V component.
Product Datasheet
| Specification | Details |
|---|---|
| Brand | GE General Electric |
| Model | DS200CDBAG1B |
| Full Part Number | DS200CDBAG1BBB |
| Series | Mark V DS200 |
| Product Name | Contactor Driver Board |
| Functional Acronym | CDBA |
| Main Function | High-speed contactor drive and control |
| Application | AC2000 / DC2000 Drive Systems |
| Contactor Function | Opens and closes compatible drive contactors |
| Test Points | 3 |
| Terminal Board | 1TB with 1TBA, 1TBB, 1TBC and 1TBD sections |
| Plug Connectors | 3 |
| Jumper | JP2 for coordinated contactor operation |
| Adjustment | Contactor coil-current potentiometer |
| PCB Coating | Normal coating |
| Instruction Manual | GEI-100182B |
| Product Status | Legacy / Obsolete |
| Condition | New / Surplus |
Key Features
- GE Mark V DS200 Contactor Driver Board
- Full assembly number DS200CDBAG1BBB
- CDBA functional designation
- Designed for compatible AC2000 and DC2000 drive applications
- Interfaces drive control circuitry with high-speed contactors
- Provides contactor open/close control
- JP2 supports coordinated operation in applicable configurations
- Three onboard test points
- Three plug connectors
- Four-section 1TB terminal connection
- Factory-set contactor coil current adjustment
- B/B/B revision assembly configuration
- Legacy GE Speedtronic Mark V hardware
Common Questions & Answers
Q: What is the DS200CDBAG1B used for?
A: It is a Contactor Driver Board used to interface drive control circuitry with high-speed contactors in compatible GE Mark V drive systems.
Q: What is the full assembly number?
A: The full assembly number associated with this model is DS200CDBAG1BBB.
Q: What does CDBA mean?
A: CDBA is the functional acronym for the Contactor Driver Board.
Q: Which drive systems use this board?
A: The DS200CDBAG1B is documented for AC2000 and DC2000 drive applications within the GE Mark V product family.
Q: What is JP2 used for?
A: On the applicable G1B configuration, JP2 is used for coordinated contactor operation, allowing multiple contactors to operate together when the system is configured for this function.
Q: Does the board have adjustable hardware?
A: Yes. The board includes a potentiometer associated with contactor coil current and configurable jumper hardware. The existing settings should be documented and matched during replacement.
Troubleshooting & Safety
Disconnect and isolate all applicable AC and DC power before removing or installing the board. Do not remove the board while the drive is energized. Follow the site’s lockout/tagout and electrical safety procedures.
Before replacement, verify the complete DS200CDBAG1B / DS200CDBAG1BBB identification and compare the revision markings with the existing assembly. Label all cables before disconnecting them and inspect the three plug connectors and 1TB terminal sections for loose contacts, contamination, or damage.
Record the original potentiometer and jumper configuration before removing the existing board. Do not arbitrarily change JP2 or the contactor-current adjustment. Incorrect settings can affect contactor operation. After installation, verify contactor control, input/output wiring, and system diagnostics before returning the drive to normal service.
Recommended GE Models
- GE DS200CDBAG1 – Contactor Driver Board
- GE DS200CDBAG1A – Contactor Driver Board
- GE DS200CDBAG1B – Contactor Driver Board
- GE DS200CDBAG1BBB – Contactor Driver Board Assembly
- GE DS200CDBAG1BDB – Contactor Driver Board
- GE DS200CPCAG1 – Contactor Pilot Board
- GE DS200CPCAG1A – Contactor Pilot Board
- GE DS200CPCAG1ABB – Contactor Pilot Board Assembly
- GE DS200CSSAG1 – Cell State Sensor Board
- GE DS200CSSAG1A – Cell State Sensor Board
- GE DS200CTBAG1A – Mark V Terminal Board
- GE DS200CTBAG1ACC – Common Data Processor Termination Board
- GE DS200CTBDG1A – Terminal Board Relay/Solenoid
- GE DS200ADPAG1A – Genius Adapter Board
- GE DS200ADPBG1A – Genius I/O Adapter Board
