Description
⚙️ Product Specifications
- Brand: GE (General Electric)
- Model: IS200WROBH1AAA (WROB Option Board)
- Series: Mark VI / Mark VIe Control Systems
- Product Name: Wide Relay Output Board / SRLY Option Board
- Origin: USA
- Status State: Active / Refurbished
- Dimensions: Standard Mark VI modular board format (approx. 7″ x 5″ x 2″ / 17.8 \times 12.7 \times 5.1 cm)
- Weight: Approx. 0.4 kg (0.9 lbs)
- Country of Origin: USA
- Power Rating: Low Voltage Backplane / Signal Powered (Relay Contact Switching up to 125V DC / 240V AC dependent on application)
📖 Operation Guidelines & Usage Instructions
The GE IS200WROBH1AAA is a wide relay output (WROB) option board designed to operate within Mark VI and Mark VIe turbine control architectures, often associated with SRLY or similar relay option sub-assemblies to expand discrete output capabilities. Ensure all system rack power, auxiliary power feeds, and external field load circuits are completely isolated, locked out, and tagged before handling, installing, or servicing the unit. Always wear a grounded electrostatic discharge (ESD) wrist strap and handle the printed circuit board strictly by its edges. Routine maintenance includes inspecting wiring terminal torque, checking relay contacts for wear, and monitoring diagnostic error registers via the ToolboxST software interface.
⚡ Power-Up / Power-Down Sequence
- Power-Up Sequence: Verify that the WROB option board is properly aligned and securely plugged into its designated mounting base, backplane slot, or mating connector. Switch on the main control rack power supply and external load circuits. Observe onboard diagnostic indicators to confirm that the system recognizes the board and establishes proper communication.
- Power-Down Sequence: Safely deactivate any active relay outputs or interlocking control loops via the engineering software. Turn off the main rack power distribution unit and isolate all external field load power feeds before disconnecting wiring or extracting the board.
❓ Frequently Asked Questions (Q&A)
- Q: What is the primary function of the IS200WROBH1AAA board?
A: It provides additional relay output switching capabilities, allowing the control system to securely command external plant devices, solenoids, and alarm actuators.
- Q: Can this option board be replaced while the control system is powered on?
A: Standard maintenance protocols require powering down the rack or following authorized software-guided online replacement procedures to prevent accidental equipment tripping, short circuits, or bus communication errors.
🚀 Recommended GE Models
- IS200DRLYH1B
- IS230TDBTH6A
- IS420UCSCH1A
- IS420PAIASH1A
- IS220UCSAH1A
- IS200STAIH1A
- IS200SRTDH2A
- IS200TRLYH1B
- IS200TBCIH1C
- DS200TCQAG1A
