Description
⚙️ Product Description
The GE IS210AEPSG1A is an AE Power Supply Board designed for GE Mark VIe control systems, particularly the Mark VIe wind and alternative-energy control platform. The board is identified by the AEPS functional designation and is built as a component-dense PCB assembly with transformers, inductors, fuses, surge-protection components, capacitors, heat sinks, connectors, test points, and diagnostic LEDs. It provides protected and regulated power functions for associated control and interface circuitry within the turbine control architecture. The G1A version represents a specific hardware and functional revision, so the complete part number should be checked against the installed board before replacement.
📋 Product Datasheet
| Parameter | Specification |
|---|---|
| Brand | General Electric (GE) |
| Model | IS210AEPSG1A |
| Related Marking | IS210AEPSG1AEC |
| Series | Mark VIe / Mark VIe Wind |
| Product Name | AE Power Supply Board |
| Functional Acronym | AEPS |
| Product Type | Power Supply PCB |
| Place of Origin | USA |
| Product Status | Used / Clean and Tested |
| PCB Construction | Component-dense industrial PCB |
| Protection Components | Fuses, MOVs, capacitors and heat sinks |
| Connectors | Plug, stab-on and header connectors |
| Diagnostic Features | LED indicators and test points |
| Dimensions | Approx. 16 × 16 × 12 cm packed/reference size; verify actual board dimensions |
| Weight | Approx. 0.8 kg reference value; verify before shipping |
| Power | Board-level power conversion/distribution; exact input/output ratings should be matched to the installed system |
| Discontinued | Legacy / associated with the Mark VIe platform |
❓ Frequently Asked Questions
Q1: What is the IS210AEPSG1A used for?
A: It is an AE Power Supply Board used within GE Mark VIe control architectures to provide regulated and protected power functions for associated control electronics.
Q2: What does AEPS mean?
A: AEPS refers to the board’s AE Power Supply function within the Mark VIe alternative-energy/wind control architecture.
Q3: Is IS210AEPSG1A the same as IS210AEPSG1AEC?
A: They are closely associated identifiers for this board family. The complete marking and revision should be checked on the physical PCB before ordering or installing a replacement.
Q4: What components are installed on the board?
A: The board can include transformers, an inductor, multiple fuses, MOV surge-protection devices, capacitors, heat sinks, connectors, integrated circuits, transistors, test points, and diagnostic LEDs.
Q5: Can this board be installed directly as a replacement?
A: Verify the complete part number, revision, connector arrangement, coating/build, and installed control-system configuration before replacement. Do not assume that boards with similar IS210AEPS designations are interchangeable.
Q6: What should be checked if the board does not operate correctly?
A: Check incoming power, fuses, connector seating, visible component damage, surge-protection components, and downstream loads. Any troubleshooting should be performed by qualified personnel with the system isolated according to site procedures.
⭐ Recommended Same-Brand GE Models
- GE IS210AEBIH1A — AE Bridge Interface Board
- GE IS210AEBIHA1A — AE Bridge Interface Board
- GE IS220AEPSH1A — AE Power Supply I/O Assembly
- GE IS210BPPCH1A — Mark VIe I/O Pack Processor Card
- GE IS210BPDAG1A — Mark VIe Power Distribution Board
- GE IS210JPDHG1A — High Density Power Distribution Board
- GE IS220PAICH1A — Mark VIe Analog Input I/O Pack
- GE IS220PHRAH1A — Mark VIe HART Analog I/O Module
- GE IS220PDIAH1A — Mark VIe Discrete Input I/O Pack
- GE IS220PDOAH1A — Mark VIe Discrete Output I/O Pack
- GE IS220PTURH1B — Mark VIe Turbine I/O Module
- GE IS220UCSAH1A — Mark VIe Controller Module
- GE IS200EGPAG1B — Exciter Gate Pulse Amplifier Board
- GE IS200EGDMH1A — Exciter Ground Detector Module
- GE IS200JPDHG1A — Mark VIe Power Distribution Board
