Description
🔹 Product Description
The GE IS210MVRCH1A, also identified as IS210MVRCH1AA, is an I/O Interface Board associated with GE Mark VI turbine control systems. It is designed for interface and signal-handling functions within the control architecture and can be used as a replacement board for compatible turbine control applications. The IS210MVRCH1A assembly is associated with the MVRC function and may interface with related control boards and field wiring through its dedicated connectors. The part number IS210MVRCH1A and alternate IS210MVRCH1AA designation are commonly associated with this board assembly.
🔹 Product Datasheet
| Parameter | Value |
|---|---|
| Brand | GE General Electric |
| Model | IS210MVRCH1A / IS210MVRCH1AA |
| Series | Mark VI |
| Product Name | I/O Interface Board |
| Place of Manufacture | United States / GE Industrial Systems |
| Product Status | New |
| Dimensions | Approx. 6.5 × 3.5 × 1.0 in; verify against the actual unit |
| Weight | Less than 5 lb before packaging |
| Origin | USA |
| Power | System-dependent; powered through the associated Mark VI control architecture |
| Discontinued | Legacy / no longer a current-generation product |
🔹 Common Questions & Answers
Q: What is the IS210MVRCH1A used for?
A: It is an interface board used within compatible GE turbine control system architectures for I/O and signal interface functions.
Q: Is IS210MVRCH1AA the same model?
A: IS210MVRCH1AA is an associated alternate identification for the IS210MVRCH1A assembly. Confirm the complete board label and revision before installation.
Q: Which GE system is it associated with?
A: The board is associated with GE Mark VI turbine control applications and the MVRC function.
Q: Can it be used as a replacement board?
A: It can be considered for replacement when the original system documentation and board revision confirm compatibility.
Q: What should be checked before installation?
A: Check the complete part number, revision, connector arrangement, board condition, system configuration, and wiring before replacing an installed unit.
Q: Is this a complete control system?
A: No. It is an individual interface board/assembly and requires the appropriate compatible GE control-system hardware.
Q: Does the board require a specific configuration?
A: Compatibility depends on the Mark VI system configuration, associated boards, firmware/software environment, and application wiring.
🔹 Recommended GE Models
- IS200VCRCH1B — Input/Output Board
- IS200VAICH1B — Analog Input VME Card
- IS200VAICH1C — Analog Input VME Card
- IS200VTCCH1B — Thermocouple Input Board
- IS200VRTDH1B — VME RTD Module
- IS200VSVOH1B — VME Servo Card
- IS200VTURH1B — Primary Turbine Protection Board
- IS200TBAIH1B — Analog Terminal Board
- IS200TRTDH1C — RTD Terminal Board
- IS200TRPGH1B — Terminal Board
- IS200TREGH1A — Gas Turbine Emergency Trip Board
- IS200DSPXH1A — Digital Signal Processor Board
- IS200RAPAG1B — Rack Power Supply Board
- IS210AEDBH3A — Bridge Interface Board
- IS215UCCAM03 — Control Board
