Description
The GE Sensing (now Baker Hughes) Moisture Target Series 6 (MTS6) is a high-performance, field-proven hygrometer designed for continuous, online moisture measurement in industrial gas and liquid process streams. The MTS6-3-6-1-0 model configuration is built to provide rapid, precise dew point sensing in challenging environments, such as natural gas processing, chemical manufacturing, and petrochemical refining. Utilizing advanced thin-film aluminum oxide sensor technology, it offers exceptional sensitivity and long-term stability, ensuring process safety and compliance with stringent moisture specifications.
Key Technical Specifications
| Parameter | Value/Description |
| Model Number | MTS6-3-6-1-0 |
| Measurement Range | Standard dew point (e.g., -110°C to +20°C range variants) |
| Sensor Technology | Thin-film aluminum oxide |
| Calibration Accuracy | \pm 2^\circC dew point |
| Operating Pressure | Up to 5000 psig (depending on housing) |
| Output Signal | 4–20 mA loop-powered |
| Response Time | < 10 seconds (wet to dry) |
| Ingress Protection | NEMA 4X / IP66 rated |
| Process Connection | 3/4″ NPT (standard configuration) |
| Operating Temp | -20°C to +60°C (electronics) |
Recommended Related Models
These accessories and instrumentation units are commonly integrated into GE/Panametrics moisture monitoring systems:
- MTS6-1-2-1-0: Alternative range/connection configuration
- MTS6-3-6-2-0: Version with enhanced calibration certification
- DewPro MMY31: Loop-powered moisture transmitter
- PM880: Portable hygrometer for spot-check verification
- XPM620: Explosion-proof moisture transmitter
- AAS-95: Sampling system for gas moisture analysis
- AAS-100: Heated sampling system for high-dew-point gases
- M2L Sensor: Replacement aluminum oxide sensing element
- 10-G Sensor: Standard range replacement sensor
- Moisture Image Series 2 (MIS2): Multi-channel analyzer for complex setups
Note: The MTS6 requires careful handling of the sensor tip to prevent contamination by oils or particulate matter. When integrating into a process stream, ensure a proper sampling system is used to regulate flow and pressure according to the technical manual.
