Description
The GUTOR 21411-5 / 0P0010 is an industrial PCB circuit board designed for use within GUTOR power protection and UPS equipment. The complete identification includes 21411-5 and 0P0010, which should both be used when sourcing a replacement.
Available product records identify 0P0010 as a GUTOR control circuit board, with additional identification including DPD 96115, 21411-5, X005, and FKM6106V1-2.
The exact electrical function depends on the host GUTOR system and configuration. For replacement work, matching the complete PCB number and associated system is recommended rather than selecting a board only by physical appearance.
📋 Product Datasheet
| Parameter | Value |
|---|---|
| Brand | GUTOR |
| Model | 0P0010 |
| Series | GUTOR UPS / Power Protection System |
| Product Name | PCB Circuit Board / Control Circuit Board |
| PCB Part Number | 21411-5 |
| Additional Identification | DPD 96115 / X005 |
| Reference | FKM6106V1-2 |
| Board Type | Industrial Control PCB |
| Application | UPS / Power Conversion Equipment |
| Condition | Used / New Open Box depending on stock |
| Country of Origin | Switzerland* |
| Power Supply | System-dependent |
| Dimensions | Not specified |
| Weight | Not specified |
- GUTOR is a Swiss industrial UPS manufacturer, but the country marking of an individual PCB should be confirmed from the physical product label.
⚙️ Operating Guidelines
🔹 Confirm the complete identification: GUTOR 0P0010 / 21411-5.
🔹 Check the PCB revision and additional markings before replacement.
🔹 Compare connectors, mounting points, terminals, components, and PCB layout with the original board.
🔹 Confirm that the replacement is intended for the same GUTOR UPS or power-conversion system.
🔹 Protect the PCB from static electricity during handling.
🔹 Inspect the board for corrosion, damaged components, burnt areas, cracked solder joints, and connector damage.
🔹 Never install or remove the board from an energized GUTOR system unless the applicable service documentation explicitly allows live replacement.
🛠️ How to Use
- 🔍 Record all identification numbers from the original PCB.
- ⚡ Shut down the associated GUTOR UPS or power system.
- 🔌 Isolate AC and DC/battery power sources.
- 🔒 Apply the required lockout/tagout procedure.
- ⏳ Allow internal stored energy to discharge.
- 🧤 Use suitable ESD protection.
- 🧩 Remove the original PCB carefully.
- 🔧 Install the 0P0010 / 21411-5 board in the correct position.
- 🔗 Reconnect all wiring and connectors according to the original configuration.
- 🔍 Check the installation before applying power.
- ⚡ Restore power following the host GUTOR system procedure.
- 🚨 Check system alarms and diagnostics.
- ✅ Perform a functional test before returning the equipment to service.
🔌 Power-On Sequence
- 🔍 Inspect the PCB and connectors.
- 🧰 Confirm that the board is correctly mounted.
- 🔗 Verify all connections.
- 🔋 Restore the approved auxiliary/DC supply.
- ⚡ Restore the main system supply according to the GUTOR procedure.
- ⏳ Allow the control electronics to initialize.
- 🖥️ Check system status.
- 🚨 Check for board or system alarms.
- 📊 Verify normal operating parameters.
- ✅ Return the system to normal operating mode.
⛔ Power-Off Sequence
- Notify the responsible operator.
- Place the connected equipment in a safe condition.
- Shut down the GUTOR system using its normal shutdown procedure.
- Isolate the AC supply.
- Isolate battery/DC sources.
- Apply lockout/tagout.
- Wait for the required discharge period.
- Verify that hazardous voltage is absent.
- Remove the PCB only after the system has been confirmed de-energized.
⚠️ GUTOR UPS equipment may contain hazardous stored electrical energy. Maintenance should be performed by qualified personnel.
📘 Product Usage Notes
The 0P0010 / 21411-5 identification is consistently associated with a GUTOR PCB circuit board. A matching product record identifies the board as a GUTOR control circuit board, with the additional identifiers DPD 96115, 21411-5, X005, and FKM6106V1-2.
The same 0P0010 21411-5 combination is also listed as a GUTOR PCB circuit board in industrial surplus inventory.
When ordering a replacement, provide the complete identification rather than simply requesting a “GUTOR PCB.” This helps avoid confusion with other GUTOR boards carrying similar physical layouts.
❓ Common Questions & Answers
Q: What is the GUTOR 0P0010?
A: It is an industrial GUTOR PCB circuit board used within GUTOR UPS and power-conversion equipment.
Q: What is the PCB number?
A: The PCB is identified as 21411-5.
Q: What is the GUTOR model number?
A: The main model/part identification is 0P0010.
Q: Is 0P0010 a PLC module?
A: No. It is a GUTOR system-specific PCB rather than a general-purpose PLC module.
Q: What additional identification may be found on the board?
A: Available records associate 0P0010 / 21411-5 with DPD 96115, X005, and FKM6106V1-2.
Q: Can any GUTOR PCB replace 0P0010?
A: No. The complete part number, revision, connector arrangement, electrical characteristics, and host system must be checked.
Q: Does the board require programming?
A: The exact requirement depends on the GUTOR system in which the PCB is installed. It should not be assumed to be a universal plug-and-play module.
Q: Can the PCB be replaced while the UPS is powered?
A: Do not assume hot-swapping is supported. The system should normally be shut down and electrically isolated before PCB replacement.
Q: What should I check before purchasing?
A: Check GUTOR 0P0010, 21411-5, additional board markings, connector layout, revision, and the exact host UPS model.
Q: Is 21411-5 the same as 0P0010?
A: They are associated identification numbers for the same GUTOR PCB assembly in available product records.
Q: What is the condition of the referenced product?
A: Condition can vary by individual inventory lot. Matching listings have been offered as both used and new/open-box stock, so the physical condition should be confirmed before purchase.
⭐ Recommended Other GUTOR Models / Parts
- GUTOR 0P0010 — PCB Control Circuit Board
- GUTOR 21411-5 — PCB Card
- GUTOR 0P0280 — PCB Circuit Board
- GUTOR 0P0284 — Interface / Power Board
- GUTOR 0P2405A — Interface Fuse Board
- GUTOR 0P2552 — Power Connection Board
- GUTOR 0P2447 — Main Processor Board
- GUTOR 640-1017 — Main Processor Board
- GUTOR 21108-2 — Voltage Supply Board
- GUTOR 0P2560A — Static Switch Controller Board
