Description
The GUTOR ELECTRIC 0P2446 / 640-1 is a main processor / PCB controller associated with GUTOR XXW UPS systems. GUTOR spare-parts documentation identifies 0P2446 as the A070 PCB Controller for XXW systems and specifies a 3-phase/1-phase configuration, 5 µs base timing, and 2 kHz PWM. It is intended for control of the associated UPS power-conversion hardware rather than use as a general-purpose PLC.
The 0P2446 is suitable for maintenance, repair, and replacement applications on compatible GUTOR UPS equipment. Related documentation also lists 0P2447 as a similar A070 PCB Controller for XXW 3-phase/3-phase systems, making it important to match the original system configuration before substitution.
0P2446
🔹 Product Keywords
GUTOR 0P2446, 640-1 Main Processor Card, GUTOR Main Processor Board, GUTOR PCB Controller, 0P2446 PCB, A070 Controller, XXW UPS Controller, GUTOR UPS Board, UPS Processor Card, GUTOR Electronic Board, Industrial UPS Spare Parts
🔹 Product Datasheet
| Parameter | Specification |
|---|---|
| Brand | GUTOR ELECTRIC |
| Model | 0P2446 |
| Designation | 640-1 Main Processor Card |
| PCB Reference | A070 |
| Product Type | PCB Controller / Processor Card |
| System | GUTOR XXW UPS |
| Configuration | 3-Phase / 1-Phase |
| Base Timing | 5 µs |
| PWM Frequency | 2 kHz |
| Application | UPS Power Conversion Control |
| Condition | Verify actual unit condition |
🔹 UPS System Integration
The 0P2446 operates as a dedicated controller within the GUTOR XXW UPS architecture. Available system documentation places this board at reference designation A070, alongside other UPS assemblies such as interface boards, power modules, static-switch components, fan monitoring, and power supplies.
The controller’s documented 2 kHz PWM and 5 µs base timing are associated with the regulation and control of the power-conversion stage. Because this is a system-specific UPS controller, correct installation depends on the complete GUTOR system configuration, not simply the physical compatibility of the PCB.
When replacing an existing board, verify the 0P2446 part number, PCB reference, hardware revision, system type, phase configuration, connectors, firmware/program memory, and associated UPS modules. Do not substitute the related 0P2447 without confirming the original UPS architecture.
🔹 Typical Applications
• Industrial UPS systems
• Critical power protection
• GUTOR XXW UPS equipment
• Static power conversion systems
• Industrial and infrastructure power systems
• UPS maintenance and refurbishment
• Replacement control-board inventory
🔹 Replacement Considerations
The complete part number 0P2446 / 640-1 should be matched with the original unit. Current documentation identifies 0P2446 as a controller for XXW 3PH/1PH systems, while 0P2447 is specified for XXW 3PH/3PH systems. This distinction can be important when selecting a replacement controller.
The supplied marketplace listing currently identifies the unit as Used, so the actual physical condition, revision markings, installed components, and included accessories should be confirmed before purchase.
For additional industrial automation, UPS, and control-system spare parts, visit New PLC DCS automation spare parts.
🔹 10 Related GUTOR Models / Components
- GUTOR 0P2447 – PCB Controller
- GUTOR 0P2405A – Interface Fuse Board
- GUTOR 0P2407 – Interface Fuse Board
- GUTOR 0P2438 – Fan Monitor
- GUTOR 0P2439 – Masterlogic II PCB Assembly
- GUTOR 0P0282 – 400 VDC Power Supply
- GUTOR 0P0284 – 220 VDC Power Supply
- GUTOR 0P0363 – Signalisation Controller
- GUTOR 0P9907 – External Connection Board
- GUTOR 0P1922A – Parallel Operating PCB Controller
Compatibility Note: Related GUTOR boards are not automatically interchangeable. Match the exact part number, PCB reference, phase configuration, UPS model, hardware revision, and system documentation before replacement.
