Description
The GUTOR UNC1X-0P-00087 is a PCA SDC Interface Card designed for use in GUTOR rectifier and battery-charger systems.
The available identification for this board describes it as “PCA SDC I/F PSU 24 VDC EMC Reinforced”, indicating a 24 VDC power-supply interface application within an SDC rectifier system. The part number has also been documented in connection with GUTOR BC24 rectifier/battery-charger equipment.
This board is a system-specific industrial PCB and should be matched by its complete material number before replacement.
📋 Product Datasheet
| Parameter | Value |
|---|---|
| Brand | GUTOR |
| Model | UNC1X-0P-00087 |
| Series | SDC Rectifier / Battery Charger |
| Product Name | PCA SDC Interface Card |
| Board Function | PSU Interface / EMC Reinforced |
| Rated System Interface | 24 VDC |
| Application | GUTOR Rectifier / Battery Charger |
| Board Type | Industrial Interface PCB |
| Country of Origin | Switzerland / Europe |
| Condition | Used / Surplus, depending on stock |
| Power | System-dependent |
| Communication | System-dependent |
| Mounting | Internal PCB Assembly |
| Compatible Equipment | GUTOR SDC Rectifier Systems |
⚠️ The 24 VDC designation refers to the documented PSU interface application. Exact input/output current, fuse ratings, connector pinout, dimensions, weight, and power consumption should be verified from the board label and the original GUTOR system documentation.
⚙️ Operating Guidelines
🔹 Confirm the complete material number UNC1X-0P-00087 before installation.
🔹 Check the original board’s revision and PCB markings.
🔹 Confirm that the board belongs to the same GUTOR SDC rectifier/battery-charger configuration.
🔹 Inspect the PCB for corrosion, damaged components, cracked solder joints, contamination, and connector damage.
🔹 Verify all 24 VDC wiring and polarity before energizing.
🔹 Use ESD protection when handling the PCB.
🔹 Do not install or remove the card from an energized rectifier unless the approved GUTOR service procedure specifically permits it.
🛠️ How to Use
- 🔍 Record the complete part number from the original card.
- ⚡ Shut down the associated GUTOR rectifier/battery charger.
- 🔌 Isolate the relevant AC and DC power sources.
- 🔒 Apply the appropriate lockout/tagout procedure.
- ⏳ Allow internal stored energy to discharge.
- 🧤 Use ESD protection when handling the card.
- 🧩 Remove the original interface card.
- 🔧 Install UNC1X-0P-00087 in the correct rack or mounting position.
- 🔗 Reconnect all cables and connectors according to the original wiring.
- 🔍 Check polarity, terminals, connectors, and mounting.
- ⚡ Restore power according to the rectifier startup procedure.
- 🚨 Check system alarms and diagnostic indications.
- ✅ Verify normal rectifier and battery-charging operation.
🔌 Power-On Sequence
- 🔍 Inspect the installed PCB.
- 🧰 Confirm correct mounting.
- 🔗 Verify all connectors and terminals.
- ⚡ Confirm the 24 VDC interface wiring.
- 🔋 Restore the auxiliary/control supply.
- ⚡ Energize the rectifier according to the GUTOR system procedure.
- ⏳ Allow the SDC control system to initialize.
- 🚨 Check for interface, PSU, rectifier, or communication alarms.
- 📊 Verify normal charging and system status.
- ✅ Return the rectifier to normal operation.
⛔ Power-Off Sequence
- Notify the responsible operator.
- Place the battery-charging system in a safe condition.
- Stop the rectifier using the normal system procedure.
- Isolate the AC input.
- Isolate the relevant DC/battery supply.
- Apply lockout/tagout where required.
- Wait for the specified discharge period.
- Verify that hazardous voltage is absent.
- Remove the interface card only after the equipment is confirmed de-energized.
⚠️ GUTOR rectifier and battery-charger equipment may contain hazardous AC and DC energy. Maintenance should be performed by qualified personnel.
📘 Product Usage Notes
The UNC1X-0P-00087 identification is associated with a PCA SDC I/F PSU 24 VDC EMC Reinforced board used for GUTOR rectifier applications.
The board has been associated with BC24-PWCP01A / SAUX-01 and BC24-PWCP01B / SAUX-01 rectifier/battery-charger configurations. This indicates that the card is intended to work as part of a specific SDC power-conversion architecture rather than as a universal 24 VDC interface module.
When ordering a replacement, provide the complete UNC1X-0P-00087 identification and, whenever possible, the GUTOR rectifier model and original board revision.
❓ Common Questions & Answers
Q: What is GUTOR UNC1X-0P-00087?
A: It is a GUTOR PCA SDC Interface Card used in rectifier and battery-charger equipment.
Q: What does PCA SDC I/F mean?
A: It identifies the board as a printed-circuit assembly used as an interface within an SDC system.
Q: What is the documented interface voltage?
A: The board is identified as a 24 VDC PSU interface.
Q: What equipment is it used with?
A: It is associated with GUTOR SDC rectifier and battery-charger systems, including BC24 configurations.
Q: Is this a PLC CPU?
A: No. It is a system-specific interface PCB rather than a general-purpose PLC CPU.
Q: Can any 24 VDC interface board replace it?
A: No. The board has a specific connector arrangement, EMC design, electrical interface, and system application.
Q: Can it be hot-swapped?
A: Do not assume hot-swapping is supported. The rectifier should normally be shut down and isolated before PCB replacement.
Q: Does the card require programming?
A: It should not be treated as a conventional programmable PLC module. Its function is dependent on the GUTOR SDC system architecture.
Q: What should I check before purchasing?
A: Check UNC1X-0P-00087, board revision, connector layout, physical PCB markings, and the exact GUTOR rectifier/battery-charger model.
Q: What is EMC Reinforced?
A: It indicates that the interface PCB has been designed with enhanced electromagnetic compatibility characteristics for its intended power-system environment.
Q: Is the exact power consumption known?
A: No reliable standalone power-consumption value should be assigned without the specific GUTOR system documentation.
⭐ Recommended Other GUTOR Models / Parts
- GUTOR UNC1X-0P-00086 — PCA SDC I/F PSU 110–125 VDC EMC Reinforced
- GUTOR UNC1X-0P-00104 — SDC Controller / MPU Modification Board
- GUTOR 0P1439AB — SDC Controller PCB
- GUTOR 0P6257 — SDC Controller Board
- GUTOR 0P2406 — GUTOR Interface PCB
- GUTOR 0P1923AA — Controller Signalling PCB
- GUTOR 0P1922AB — Parallel Operating Controller PCB
- GUTOR 0P5617AA — RS232 Interface PCB
- GUTOR 0P2438AA — Fan Monitor 8-Channel PCB
- GUTOR 0P0285AD — PSU PCB Assembly
These parts belong to the wider GUTOR rectifier, battery-charger, UPS, and power-conversion spare-parts family. Exact compatibility should always be verified using the complete material number and host-system configuration.
