Description
The GUTOR UNC1X-0P-00088 is identified as a PCA SDC Interface Card for GUTOR SDC rectifier and battery-charger equipment.
This board belongs to the GUTOR SDC interface-card family and is intended for system-specific power-supply and control interfacing. It should be matched by the complete material number before installation, since GUTOR interface boards can have similar physical construction but different electrical interfaces.
The supplied product identification is UNC1X-0P-00088. Exact electrical ratings, connector assignments, dimensions, and weight should be verified from the physical board and the applicable GUTOR equipment documentation rather than estimated.
📋 Product Datasheet
| Parameter | Value |
|---|---|
| Brand | GUTOR |
| Model | UNC1X-0P-00088 |
| Series | SDC Rectifier / Battery Charger |
| Product Name | PCA SDC Interface Card |
| Product Type | Interface PCB |
| Main Function | SDC System Interface |
| Application | Rectifier / Battery Charger |
| Board Technology | Industrial PCB Assembly |
| Interface Voltage | System-dependent |
| Power Supply | System-dependent |
| Communication | System-dependent |
| Country of Origin | Switzerland / Europe |
| Condition | Surplus / Used, depending on stock |
| Dimensions | Not specified |
| Weight | Not specified |
⚠️ Unlike some other SDC interface cards, a reliable standalone voltage or current rating for UNC1X-0P-00088 should not be assumed without the original GUTOR technical documentation.
⚙️ Operating Guidelines
🔹 Verify the complete identification UNC1X-0P-00088.
🔹 Compare the replacement PCB with the original card before installation.
🔹 Check PCB revision, connectors, terminals, mounting holes, and component layout.
🔹 Confirm the exact GUTOR SDC rectifier or battery-charger model.
🔹 Inspect for corrosion, damaged components, cracked solder joints, and connector damage.
🔹 Use ESD protection when handling the PCB.
🔹 Do not install or remove the card while the associated equipment is energized unless the manufacturer’s service procedure explicitly permits it.
🛠️ How to Use
- 🔍 Record the complete part number and revision.
- ⚡ Shut down the associated GUTOR rectifier/battery-charger system.
- 🔌 Isolate the applicable AC and DC/battery sources.
- 🔒 Apply lockout/tagout procedures.
- ⏳ Allow internal stored energy to discharge.
- 🧤 Wear suitable ESD protection.
- 🧩 Remove the existing interface card.
- 🔧 Install the UNC1X-0P-00088 in the correct position.
- 🔗 Reconnect all cables and connectors according to the original configuration.
- 🔍 Check connector seating and wiring polarity.
- ⚡ Restore power according to the system startup procedure.
- 🚨 Check system alarms and diagnostic indicators.
- 📊 Verify normal rectifier and battery-charging operation.
- ✅ Return the equipment to service after successful testing.
🔌 Power-On Sequence
- 🔍 Inspect the PCB installation.
- 🧰 Confirm mechanical mounting.
- 🔗 Verify all connectors and terminals.
- ⚡ Confirm the correct system supply conditions.
- 🔋 Restore the auxiliary/control supply.
- ⚡ Energize the GUTOR rectifier according to its normal procedure.
- ⏳ Allow the control system to initialize.
- 🚨 Check for interface and rectifier alarms.
- 📊 Verify system operating values.
- ✅ Confirm normal battery-charging operation.
⛔ Power-Off Sequence
- Notify the responsible operator.
- Place the rectifier/battery charger in a safe state.
- Stop the system using the normal shutdown procedure.
- Isolate AC input.
- Isolate the applicable DC/battery source.
- Apply lockout/tagout.
- Wait for the specified discharge period.
- Verify that hazardous voltage is absent.
- Remove the PCB only after electrical isolation has been confirmed.
⚠️ GUTOR rectifier and battery-charger systems may contain hazardous AC and DC energy. PCB maintenance should be carried out by qualified service personnel.
📘 Product Usage Notes
The UNC1X-0P-00088 should be treated as a dedicated GUTOR SDC interface PCB rather than a universal industrial interface module.
For replacement purposes, use the complete material number and compare the original board’s:
- PCB markings
- Revision
- Connector arrangement
- Terminal configuration
- Mounting dimensions
- Host rectifier model
- Associated control-system configuration
Do not substitute the card solely because another GUTOR SDC interface board looks physically similar.
❓ Common Questions & Answers
Q: What is GUTOR UNC1X-0P-00088?
A: It is a GUTOR PCA SDC Interface Card intended for use within GUTOR SDC rectifier and battery-charger systems.
Q: Is it a PLC CPU?
A: No. It is a dedicated GUTOR system interface PCB.
Q: What does SDC refer to?
A: SDC identifies a GUTOR system family associated with rectifier and battery-charger equipment.
Q: What is the exact operating voltage?
A: A reliable standalone voltage specification for UNC1X-0P-00088 should be confirmed from the original GUTOR documentation and the actual board markings.
Q: Can it replace another GUTOR SDC interface card?
A: Not automatically. Different SDC interface cards can have different electrical interfaces and connector assignments.
Q: Can the board be hot-swapped?
A: Do not assume hot-swapping is supported. The associated equipment should normally be shut down and electrically isolated before replacement.
Q: Does the card require programming?
A: It is a dedicated system interface PCB rather than a conventional programmable PLC module. Any system-specific configuration requirements should be checked in the applicable GUTOR service documentation.
Q: What should I check before purchasing?
A: Check UNC1X-0P-00088, revision markings, PCB layout, connectors, and the exact GUTOR SDC equipment model.
Q: Can I use UNC1X-0P-00088 in any GUTOR UPS?
A: No. Compatibility must be confirmed against the specific GUTOR rectifier, charger, or UPS configuration.
Q: What is the safest replacement procedure?
A: Shut down the equipment, isolate AC/DC energy sources, verify zero hazardous voltage, replace the board using the original wiring configuration, and perform a controlled functional test.
⭐ Recommended Other GUTOR Models / Parts
- GUTOR UNC1X-0P-00087 — PCA SDC Interface Card
- GUTOR UNC1X-0P-00086 — SDC PSU Interface Card
- GUTOR 0P1922 — Parallel Operation Controller PCB
- GUTOR 0P2552 — Power Connection Board
- GUTOR 0P0280 — PCB Circuit Board
- GUTOR 0P0010 — Control Circuit Board
- GUTOR 0P2447 — Main Processor Board
- GUTOR 21108-2 — Voltage Supply Board
- GUTOR 0P2405A — Interface Fuse Board
- GUTOR 0P2560A — Static Switch Controller Board
