Description
Product Overview
The HIMA HIMatrix F60 AI 8 01 is a safety-related analog input module for the modular HIMatrix F60 controller system. It provides eight analog input channels for process signals and can be configured for unipolar or bipolar input measurements.
HIMA documentation identifies the module as an 8-channel analog input module and lists it as part of the safety-related F60 I/O family. The module is TÜV-certified for safety-related applications up to SIL 3, Category 4 and PL e, with CENELEC SIL 4 applications also covered by the applicable certification.
Technical Specifications
| Parameter | Specification |
|---|---|
| Brand | HIMA |
| Product Family | HIMatrix F60 |
| Model | AI 8 01 |
| Module Type | Safety Analog Input Module |
| Analog Inputs | 8 |
| Input Configuration | 8 unipolar or 4 bipolar functions |
| Voltage Measurement | 0–10 V / ±10 V configurations |
| Current Measurement | 0/4–20 mA using external shunt resistor |
| I/O Bus Isolation | Galvanically separated |
| Safety Rating | SIL 3 / Cat. 4 / PL e |
| Applicable CENELEC Rating | SIL 4, subject to applicable system/certification conditions |
| Installation | HIMatrix F60 modular rack |
| Permitted I/O Slots | Slots 3–8 |
The module can be configured for eight unipolar analog inputs or four bipolar functions. For current measurement, the HIMA manual specifies the use of an external resistor of up to 500 Ω in parallel with the input.
Main Functions
- Safety-related analog signal acquisition
- 8 analog input channels
- Configurable unipolar or bipolar measurement
- Voltage signal measurement
- Current signal measurement with external shunt
- Galvanic separation from the I/O bus
- Safety diagnostics within the HIMatrix system
- Integration with the F60 central processing module
The module is intended for safety-related measurement rather than general-purpose PLC analog I/O. HIMA’s technical documentation specifically places the AI 8 01 in the safety-related HIMatrix I/O module family.
HIMatrix F60 System Position
The F60 is a modular system. Its rack reserves the first two positions for the power supply and central module:
- Slot 1: PS 01 Power Supply
- Slot 2: CPU / Central Module
- Slots 3–8: I/O modules
The AI 8 01 can therefore be installed in the available F60 I/O positions rather than functioning as a standalone controller.
Typical Applications
The module can be used for safety-related process measurements in applications such as:
- Process safety systems
- Machinery safety
- Oil and gas installations
- Chemical and petrochemical plants
- Power generation
- Transportation and rail safety systems
- Industrial emergency shutdown and protection systems
Typical field signals can include voltage or current outputs from process transmitters and other safety-related measurement devices, provided that the complete system configuration meets the required safety and signal specifications.
Installation & Configuration
Before installing the module, confirm the exact F60 hardware configuration and the required input signal type.
- Switch the system to the appropriate safe maintenance state.
- Confirm the module identification and hardware revision.
- Verify that the target position is an available F60 I/O slot.
- Check the field wiring and input signal range.
- Install the module into the F60 backplane.
- Configure the I/O channels using the applicable HIMA engineering software.
- Verify channel diagnostics and signal values.
- Perform a complete functional test before returning the safety system to operation.
HIMA documentation states that F60 systems can be configured using SILworX or ELOP II Factory, depending on the controller operating-system revision.
Inspection & Maintenance
For a spare or replacement module, inspect:
- Model and hardware revision label
- PCB and housing condition
- Backplane connector
- Terminal/field wiring interface
- Signs of corrosion or contamination
- Mechanical damage
- Status indicators
- Configuration and firmware compatibility
For incoming inspection, the safest approach is to verify the physical nameplate against the buyer’s existing module before installation. A live test should include power-up, channel verification, simulated analog signals, diagnostic checking, and system communication where the test setup permits.
Compatibility Notes
The most important identification point is the distinction between the different F60 I/O modules.
AI 8 01 is an analog input module.
It should not be confused with:
- AO 8 01 — Analog Output Module
- DI 32 01 — Digital Input Module
- DIO 24/16 01 — Digital I/O Module
- MI 24 01 — Analog/proximity input module
- F60 CPU 03 — Central Processing Module
HIMA’s current revision documentation separately identifies these F60 modules and their functions.
There is also an important software lifecycle consideration: HIMA’s newer SILworX documentation states that HIMatrix F60 01 controllers are no longer supported for online connections by SILworX V9.36 and later. This does not mean the physical AI 8 01 module itself is unusable; it means the engineering/software environment should be checked before attempting configuration or maintenance.
Condition
The referenced eBay listing is currently described as New Other / In the Box.
For shipment, verify the module label, revision, connector condition, packaging, and any included accessories. If the unit is being supplied as a replacement spare, matching the existing hardware revision is recommended.
Ordering Information
Please provide the complete identification shown on the module label, including:
- HIMA HIMatrix F60
- AI 8 01 / AI 801 designation
- Hardware revision
- Part number, if present
- Required quantity
For replacement applications, a photo of the installed module’s nameplate can help confirm the correct hardware version.
Recommended eBay Title
HIMA HIMatrix F60 AI 8 01 | 8-Channel Safety Analog Input Module | SIL 3
