Description
The Honeywell CC-PWRR01 is an advanced redundant power supply module engineered specifically for Honeywell’s flagship Experion Series C distributed control architecture, including C300 controllers. Designed to deliver continuous, highly stable 24 VDC power to critical process controllers and associated I/O modules, this dual-module configuration eliminates single points of failure. Its rugged industrial design ensures seamless hot-swappable operation, robust thermal management, and reliable plant uptime under the most demanding operational environments.
📊 Product Datasheet & Technical Parameters
| Parameter Name | Technical Specification Value |
| Model Designation | Honeywell CC-PWRR01 |
| Manufacturer | Honeywell Process Solutions |
| System Platform | Experion Series C Architecture |
| Input Voltage Range | 85 to 264 VAC / 47 to 63 Hz |
| Output Voltage | Regulated +24 VDC |
| Output Current Rating | Up to 20 A (Dual Redundant Configuration) |
| Heat Dissipation | 145 Watts maximum |
| Operating Temperature Range | -20°C to +70°C |
| Module Dimensions | Standard Series C Enclosure Profile (~313 x 30 x 278 mm) |
| Weight & Origin | Approximately 2.0 kg to 3.5 kg / United States |
⚙️ Product Usage Instructions
🔌 Secure Chassis Mounting: Install and secure the CC-PWRR01 power assembly firmly into the designated slots of the Series C cabinet enclosure, ensuring complete mechanical alignment with backplane distribution rails.
🔗 Power Input Wiring: Carefully connect incoming AC mains lines (85-264 VAC) to the primary terminal blocks, applying correct wire stripping and torque specifications to guarantee safe electrical contact.
⚡ Redundancy and Status Verification: Inspect the front-panel indicator LEDs and system diagnostic registers to verify that both redundant power channels are active, sharing the electrical load correctly before full system commissioning.
💻 Hot-Swap Maintenance: Utilize the built-in isolation and back-feed protection diodes to safely extract and replace an individual power module under active load without disrupting the running C300 controller or process execution.
❓ Frequently Asked Questions (Q&A)
❓ Q1: What is the primary function of the Honeywell CC-PWRR01 module?
✅ A1: The CC-PWRR01 serves as a high-reliability dual redundant power supply system designed to deliver uninterrupted +24 VDC power to Experion Series C controllers and associated hardware.
❓ Q2: Does this model include internal battery backup features?
✅ A2: No, the CC-PWRR01 standard redundant design relies entirely on dual AC-powered modules without an internal battery backup component (unlike the CC-PWRB01 variant).
❓ Q3: Can an individual power supply channel be replaced while the system is powered on?
✅ A3: Yes, the module supports hot-swapping under load, allowing maintenance technicians to replace a faulty power unit safely while the second module maintains continuous system operation.
🔍 Recommended Alternative Series and Models
- Honeywell CC-PWRN01 (Series C Non-Redundant Power Supply Module)
- Honeywell CC-PWRB01 (Series C Power Supply with Battery Backup)
- Honeywell CC-TDIL01 (Series C 32-Channel Digital Input Module)
- Honeywell CC-TDOB11 (Series C 32-Channel Digital Output Module)
- Honeywell CC-PAOH01 (Series C High-Level Analog Input Module)
- Honeywell CC-PAON01 (Series C Analog Output Module)
- Honeywell 8C-PCNT03 (Series C Control Execution Environment Module)
- Honeywell FC-BKM-0001 (Safety Manager Battery and Key Switch Module)
- Honeywell TC-IDD321 (Experion LS 32-Channel Digital Input Module)
- Honeywell ControlEdge C300 Controller Unit
