Description
The Honeywell CC-SDOR01 (Part Number: 51308380-175) is a high-reliability, 32-channel non-redundant Digital Output Relay Extension I/O Terminal Adapter (IOTA) designed specifically for Honeywell’s Experion Process Knowledge System (PKS) Series C architecture. It bridges standard controller output commands with heavy-duty industrial field devices—such as AC/DC solenoids, motor starters, control valves, and indicator lights—providing galvanic isolation and high-capacity switching.
📊 Product Datasheet Parameters
- 🏷️ Product Type & Model: Digital Output Relay Extension IOTA (CC-SDOR01)
- 🔢 Manufacturer Part Number: 51308380-175
- ⚙️ System Application: Honeywell Experion PKS Series C I/O Architecture (Non-Redundant)
- 🔌 Number of Output Channels: 32 isolated relay outputs
- 🔄 Contact Configuration: Jumper-selectable Form-A (SPST/NO) or Form-B (SPST/NC) contacts per output
- 💡 Contact Material: AgSnO_2 (Silver Tin Oxide) for high endurance against inductive loads
- ⚡ Maximum Load Voltage: 250 VAC (RMS) / 125 VDC
- 🔌 Relay Contact Current Rating: 3 A at 125/250 VAC
- ⚡ Coil Control Voltage: 24 VDC input drive from the associated Series C digital output module
- 🛡️ Isolation Voltage: 2,500 VAC galvanic coil-to-contact isolation
- ⚖️ Product Net Weight: Approximately 0.46 kg to 0.96 kg (dependent on enclosure housing)
- 🌍 Country of Origin: United States
- 🌡️ Operating Temperature Range: -40^\circC to +70^\circC (-40^\circF to +158^\circF) industrial standard threshold
📖 Product Instructions for Use
- Power Isolation: Always ensure that rack power and field loop supplies are completely turned off and locked out before installing or extracting the CC-SDOR01 board to prevent electrical shock or backplane bus faults.
- Electrostatic Precautions: Wear a properly grounded anti-static wrist strap when handling the unit to protect sensitive components from electrostatic discharge.
- Jumper Configuration: Prior to installation, configure the board’s onboard jumpers for each channel to match your required Form-A (Normally Open) or Form-B (Normally Closed) contact behavior.
- Mounting & Wiring: Securely mount the IOTA onto the Series C panel framework and connect field actuator wiring directly to the integrated screw terminals, adhering strictly to plant loop schematics.
- Diagnostic Verification: Restore system power and verify through the Experion Station configuration software that output states update cleanly and channel diagnostic parameters report normal operation.
❓ Common Questions & Answers (Q&A)
- Q: What is the primary function of the CC-SDOR01 module?
A: It serves as a relay extension IOTA that converts low-power digital control signals from the Experion Series C system into isolated, high-capacity relay contacts capable of switching heavy industrial loads.
- Q: Does the CC-SDOR01 module support system redundancy?
A: No, the CC-SDOR01 is engineered specifically as a non-redundant IOTA configuration, offering a cost-effective solution for single-path applications where hardware redundancy is not mandated.
- Q: Can the contact configuration be adjusted for individual channels?
A: Yes, each of the 32 output channels features jumper-selectable configurations allowing you to independently set them as Form-A (Normally Open) or Form-B (Normally Closed) contacts.
🏆 Recommended Honeywell Series & Models
- Honeywell CC-TDOR11 Redundant Digital Output Relay IOTA
- Honeywell Experion C300 Controller Module
- Honeywell CC-PDIL01 32-Channel Digital Input Module
- Honeywell CC-PDOB01 32-Channel Digital Output Module
- Honeywell CC-PAIH01 / CC-PAIH02 HART Analog Input Modules
- Honeywell CC-PAOH01 HART Analog Output Module
- Honeywell TK-FTEB01 Fault Tolerant Ethernet Bridge Module
- Honeywell Safety Manager Enhanced Controller
- Honeywell Series C Power Supply Units
- Honeywell Experion Control Execution Environment (CEE) Hardware Cards
