Description
The Honeywell CC-TAOX01 is a high-performance, 16-channel analog output module and Input/Output Termination Assembly (IOTA) engineered specifically for Honeywell’s Experion Process Knowledge System (PKS) Series C architecture. Designed for precise process control, this module delivers reliable 4–20 mA current loop signals to field final control elements such as control valves, I/P converters, actuators, and positioners. Featuring integrated HART protocol communication, built-in channel diagnostics, and robust fault-handling capabilities, it ensures exceptional reliability and uptime in critical industrial automation environments.
📊 Product Parameters & Datasheet
- 🏷️ Model & Part Number: CC-TAOX01 (Series C Analog Output IOTA)
- 🏭 Manufacturer: Honeywell
- 💻 System Platform: Experion PKS Series C Architecture
- 🔌 Output Channels: 16 independent analog output current loops
- 📈 Output Signal Range: 4 to 20 mA DC (operating range approx. 2.9 mA to 21.1 mA)
- 🎛️ D/A Resolution: 12-bit digital-to-analog conversion
- 🎯 Calibrated Accuracy: ±0.35% of full scale (FS) typical at 25°C
- 🔋 Load Resistance / Compliance: Up to 800 Ω resistive load @ 24 V DC; 16 V compliance voltage
- 🌐 HART Protocol Support: Dual-modem HART communication enabled for remote device configuration, diagnostics, and calibration
- 🛡️ Diagnostic Features: Open-wire detection, configurable FAILOPT safe states (hold/shed-to-zero), and full loop self-check functionality
- 📏 Form Factor: Compact Series C IOTA footprint with vertical wiring and two-tier detachable terminal blocks
- ⚖️ Net Weight: Approx. 0.4 kg (0.9 lbs)
- 🌍 Country of Origin: United States
- 🌡️ Operating Temperature Range: -20°C to +70°C industrial standard
📘 Product Instructions
- Isolation: Ensure that all primary power feeds, loop supplies, and external power sources connected to the module and Series C IOTA are completely switched off and locked out before installation or extraction.
- Mounting: Carefully align and secure the CC-TAOX01 module onto its designated Series C mounting channel or panel backplane, ensuring that connection pins seat smoothly without binding.
- Wiring Termination: Connect field actuator control wiring, loop power feeds, and signal shields to the two-tier detachable terminal blocks, verifying correct loop polarity and channel mapping against system engineering schematics.
- Verification: Check configuration parameters, HART tag assignments, scale ranges, and fault-handling options (FAILOPT) within the Experion engineering station prior to startup.
- Initialization: Restore power to the control rack and observe the front-panel diagnostic indicators to confirm proper module communication, hardware health, and active signal generation across all 16 channels.
❓ Frequently Asked Questions (Q&A)
Q: What control platform is compatible with the Honeywell CC-TAOX01?
A: It is natively designed for Honeywell’s Experion PKS using the Series C hardware platform and C300 controller architecture.
Q: Does the CC-TAOX01 module support HART communication?
A: Yes, it features integrated dual-modem HART protocol support, allowing bi-directional digital communication with smart field instruments for configuration and diagnostics.
Q: How does the module respond to a communication loss or controller fault?
A: It supports configurable FAILOPT safe states (such as holding the last known value or shedding to zero) to ensure safe positioning of connected valves and actuators during a fault condition.
Q: What troubleshooting steps should be taken if an output channel fails to drive the field device?
A: Safely power down the slot, inspect module seating on the IOTA, check terminal wiring for loose connections or ground faults, verify loop resistance against the 800 Ω limit, and review channel status logs in the engineering software.
🔥 Recommended Alternative Honeywell Series & Models
- Honeywell 8C-TAOXB1 16-Channel Redundant Analog Output IOTA Module
- Honeywell CC-TDOB01 16-Channel Digital Output Module
- Honeywell CC-PAOH01 Analog Output Module
- Honeywell CC-PAIH01 Analog Input Module
- Honeywell TC-OAV081 8-Channel Analog Output Module
- Honeywell Experion C300 Controller Processor Module
- Honeywell Series 8 I/O Subsystem Components
- Honeywell Safety Manager Output Cards
- Honeywell TDC 3000 Process Manager Hardware
- Honeywell PlantCruise Distributed Control System Architecture
