Description
The Honeywell FS-SICC-0001/L3 is a high-performance system interconnection cable (SICC) engineered specifically for Honeywell’s Safety Manager and Fail-Safe Control (FSC) architectures. Designed to bridge Safety Manager I/O modules with Field Termination Assemblies (FTAs), it guarantees secure, low-loss, and noise-immune signal transmission in safety-critical industrial process environments.
📊 Product Datasheet Parameters
- 🏷️ Product Type & Model: System Interconnection Cable for Chassis I/O (FS-SICC-0001/L3)
- ⚙️ System Application: Honeywell Safety Manager & FSC Chassis I/O to Field Termination Assemblies (FTAs)
- 📏 Cable Length Code: /L3 (3 meters nominal deployment length)
- 🔌 Conductor Configuration: 20 \times AWG 22 (0.34 mm^2) double-shielded copper conductors
- 🛡️ Shielding Type: Comprehensive double shielding for high electromagnetic interference (EMI) immunity
- 📐 Nominal Outer Diameter: 9.93 mm (0.39 in)
- 🔌 Connector Types: Dedicated I/O module connector on one end and a 20-pin FTA connector on the opposite end
- ⚖️ Product Net Weight: Approximately 2.0 kg (inclusive of connectors and shielding)
- 🌍 Country of Origin: United States / European manufacturing standards
- 🌡️ Operating Temperature Range: -40^\circC to +85^\circC (-40^\circF to +185^\circF)
🛡️ Product Instructions for Use
- Power Isolation: Always ensure that all system power feeds to the respective Safety Manager I/O racks and field termination loops are completely shut off and locked out before installing or disconnecting the interconnection cable.
- Mechanical Routing: Route the SICC cable carefully through designated cable trays or conduits, avoiding sharp bends, pinch points, and proximity to high-voltage power lines to preserve signal integrity.
- Connector Engagement: Align the multi-pin connectors precisely with the module backplane interface and the FTA terminal block header, fastening thumbscrews or locking mechanisms securely to prevent loose connections.
- Shield Grounding: Verify that the double-shielded outer braiding makes proper continuous contact with the cabinet earth ground bars to maintain optimal noise rejection.
❓ Common Questions & Answers (Q&A)
- Q: What is the primary function of the FS-SICC-0001 cable series?
A: It acts as a dedicated link connecting Safety Manager I/O cards directly to Field Termination Assemblies (FTAs), streamlining field wiring in safety-instrumented systems.
- Q: What does the ‘/L3’ suffix designate in the part number?
A: The suffix designates the custom cut-length variant of the cable, where ‘/L3’ stands for a 3-meter physical length configuration.
- Q: Why is double shielding important for this cable?
A: Double shielding prevents external electromagnetic interference (EMI) and radio frequency interference (RFI) from corrupting critical safety signals traveling between the I/O modules and safety controllers.
🏆 Recommended Honeywell Series & Models
- Honeywell Safety Manager Enhanced Controller
- Honeywell FS-SDI-1624 Safe Digital Input Module
- Honeywell FC-SDO-0524 Safe Digital Output Module
- Honeywell FC-SAI-0120 Safe Analog Input Module
- Honeywell FSC (Fail Safe Controller) Central Processing Units
- Honeywell Experion C300 Controller Module
- Honeywell Safety Manager I/O Expansion Racks
- Honeywell CC-PDIL01 Digital Input Module
- Honeywell TK-FTEB01 Fault Tolerant Ethernet Bridge Module
- Honeywell Series C Fail-Safe I/O Modules
