Description
The Honeywell TC-CCR014 is a high-availability, dual-media Redundant ControlNet Interface (CNI) module engineered specifically for Honeywell’s Experion Process Knowledge System (PKS) Series C architecture. Designed to operate within mission-critical industrial control environments, this module establishes a deterministic and repeatable communication bridge between Honeywell C300 controllers and the broader control network infrastructure, ensuring fault tolerance, seamless data exchange, and zero single points of network failure.
📊 Product Parameters & Datasheet
- 🏷️ Model & Part Number: TC-CCR014 (Redundant ControlNet Interface Module)
- 🏭 Manufacturer: Honeywell
- 💻 System Platform: Experion PKS Series C Architecture (C300 compatible)
- 🌐 Network Type: ControlNet (deterministic industrial network protocol)
- ⚡ Data Signaling Rate: 5 Mbps
- 🔋 Power Supply & Consumption: 24 V DC nominal (\pm 10\%), < 5 W power draw
- 🔄 Redundancy Support: Dual-channel automatic media failover with fast recovery times (< 10 ms)
- 🔌 Interface Connectors: Dual independent ports supporting twisted pair or fiber optic media options
- 🛡️ Diagnostic Features: Real-time status indicators (LEDs) for power, network communication, link activity, and fault detection
- 🌍 Country of Origin: United States
- 🌡️ Operating Temperature Range: -40^{\circ}C to +70^{\circ}C industrial standard
📘 Product Instructions
- Isolation: Ensure that all primary control rack power feeds and external power sources are completely switched off and locked out before installing or extracting the module.
- Mounting: Carefully align and slide the TC-CCR014 module into its designated slot within the Series C controller backplane or redundant carrier chassis, ensuring that interface pins engage smoothly without binding.
- Cabling & Termination: Connect the primary and secondary ControlNet communication cables securely to the appropriate ports, verifying proper shielding and termination practices.
- Verification: Check network configuration, node address settings, and redundancy health tags within the Experion Control Builder engineering station prior to startup.
- Initialization: Restore power to the control assembly and observe front-panel diagnostic LED indicators to confirm proper module boot, network synchronization, and active redundant communications.
❓ Frequently Asked Questions (Q&A)
Q: What is the primary function of the Honeywell TC-CCR014?
A: It acts as a redundant ControlNet interface module that connects Experion Series C controllers to the plant ControlNet network, guaranteeing high availability and fault-tolerant data communications.
Q: Does the TC-CCR014 support automatic failover?
A: Yes, it features automatic media failover capabilities between dual communication paths, executing switches in under 10 milliseconds to maintain control loop continuity.
Q: Which system platforms are compatible with this module?
A: It is natively designed for Honeywell’s Experion PKS platform utilizing Series C hardware infrastructure and C300 controllers.
Q: What troubleshooting steps should be taken if network communication drops?
A: Safely power down the rack, check module backplane seating, inspect physical cable connections and media taps for damage, and review network status logs via the Experion engineering station.
🔥 Recommended Alternative Honeywell Series & Models
- Honeywell TC-CCN014 Non-Redundant ControlNet Interface Module
- Honeywell TC-CCR013 Legacy Redundant ControlNet Interface Module
- Honeywell Experion C300 Controller Processor Module
- Honeywell CC-PFB401 Fieldbus Interface Module (FIM-4)
- Honeywell Series 8 I/O Subsystem Components
- Honeywell Safety Manager Controller Cards
- Honeywell TDC 3000 Process Manager Hardware
- Honeywell ControlEdge HC900 Controller Platform
- Honeywell PlantCruise Distributed Control System Architecture
