Description
The Honeywell TC-IXR061 is a specialized 6-channel analog input module engineered for Honeywell’s Experion Process Knowledge System (PKS), PlantCruise, and Experion LS architectures. Designed specifically for high-precision temperature data acquisition, this module supports Resistance Temperature Detector (RTD) sensors. Featuring complete galvanic isolation across all input channels, robust RFI immunity, and fast update cycles, it ensures reliable and accurate signal processing in demanding industrial process control and manufacturing environments.
📊 Product Parameters & Datasheet
- 🏷️ Model & Part Number: TC-IXR061 (Experion RTD Analog Input Module)
- 🏭 Manufacturer: Honeywell
- 💻 System Platform: Experion PKS / PlantCruise / Experion LS I/O Architecture
- 🔌 Number of Channels: 6 galvanically isolated input channels
- 📈 Sensor Compatibility: Optimized for RTD (Resistance Temperature Detector) inputs
- ⏱️ Module Update Rate: 50 ms across all channels
- 🎛️ Channel Bandwidth: DC to 15 Hz (-3 dB)
- 🛡️ Open Wire Detection: Automatic out-of-range reporting within less than 5 seconds
- ⚡ Power Dissipation: 4.3 W maximum
- 🔌 Termination Blocks: Utilizes TC_TBNH 20-position connection terminal blocks
- 🛡️ RFI Immunity: Error of less than 2.0% of range at 10 V/m (27 to 1000 MHz)
- 🌍 Country of Origin: United States
- 🌡️ Operating Temperature Range: Standard industrial environmental specifications (-20°C to +70°C variant dependent)
📘 Product Instructions
- Isolation: Ensure that all primary control rack power feeds, loop supplies, and external field sensor lines connected to the module and terminal block are completely switched off and locked out before installation or extraction.
- Mounting: Carefully align and slide the TC-IXR061 module into its designated slot within the Experion I/O carrier or base chassis, ensuring that backplane connector pins engage smoothly without binding.
- Wiring Termination: Connect field RTD sensor wires (2-, 3-, or 4-wire configurations) to the TC_TBNH 20-position terminal blocks, checking correct polarity and maintaining proper shield grounding to prevent common-mode noise.
- Verification: Verify configuration parameters, channel scaling tags, and fault definitions within the Experion engineering station configuration software prior to system startup.
- Initialization: Restore power to the control rack and observe front-panel diagnostic LED indicators to confirm proper module booting, backplane communication sync, and normal channel data acquisition.
❓ Frequently Asked Questions (Q&A)
Q: What control system platforms support the Honeywell TC-IXR061?
A: It is natively designed for Honeywell’s Experion PKS, PlantCruise, and Experion LS distributed control system architectures.
Q: What type of sensors does the TC-IXR061 module interface with?
A: It is specifically designed and optimized to interface with Resistance Temperature Detector (RTD) sensors for accurate temperature measurement.
Q: How does the module handle a broken sensor wire in the field?
A: It features built-in open-wire detection that automatically flags and reports out-of-range readings within less than 5 seconds.
Q: What troubleshooting steps should be taken if an input channel reports erratic values?
A: Safely power down the slot, check module seating on the carrier, inspect terminal block wiring for loose connections or corrosion, verify RTD configuration settings, and review channel diagnostics in the Experion engineering software.
🔥 Recommended Alternative Honeywell Experion & I/O Series Models
- Honeywell TC-IAH061 6-Channel High-Level Analog Input Module
- Honeywell TC-IAH161 16-Channel High-Level Analog Input Module
- Honeywell CC-PAIH01 Experion Series C Analog Input Module
- Honeywell CC-TAIX01 Analog Input IOTA Module
- Honeywell MC-TAMR04 16-Channel RTD Low-Level Input Multiplexer (TDC 3000)
- Honeywell 900B01-0301 8-Channel Universal Analog Input Module (HC900)
- Honeywell Experion C300 Controller Processor Module
- Honeywell Series 8 I/O Subsystem Modules
- Honeywell Safety Manager Input/Output Cards
- Honeywell PlantCruise Distributed Control System Architecture
