Description
The Honeywell TC-OAV081 is an 8-channel high-performance analog output module engineered for precision control within the Honeywell Experion C300 controller and Experion Process Knowledge System (PKS) architecture. Designed for demanding industrial environments, this module delivers accurate voltage and current signals to field actuators, drives, valves, and other control elements, ensuring reliable performance in automated chemical, power, and manufacturing processes.
📊 Product Parameters & Datasheet
- 🏷️ Model & Part Number: TC-OAV081 (C300 / Experion Series)
- 🏭 Manufacturer: Honeywell
- 💻 Module Type: Analog Output Module (8 Channels)
- ⚡ Voltage Output Range: ±10.4 V (supports configurable ranges such as 0 to 10V, 0 to 5V, -5 to 5V)
- 🔋 Current Output Range: 0 to 21 mA (supports standard 4 to 20 mA loops)
- 🎯 Accuracy: Better than 0.05% of range at 25°C
- ⚡ Power Requirements:
- 150 mA @ 5.1 V DC
- 210 mA @ 24 V DC
- ⏱️ Update Rate & Settling Time: 25 ms update rate for all channels; < 2 ms settling time to 95% final value with resistive loads
- 🔌 Termination Block: Compatible with TC-TBNH (20-position terminal block)
- 📏 Physical Dimensions: Approx. 14.6 cm x 14.0 cm x 3.5 cm
- ⚖️ Net Weight: Approx. 0.24 kg (0.5 lbs)
- 🌍 Country of Origin: United States
- 🌡️ Operating Temperature Range: -20°C to +60°C industrial standard
📘 Product Instructions
- Isolation: Ensure that all primary power feeds and loop power supplies to the system chassis/rack are completely switched off and locked out before handling module installation or extraction.
- Mounting: Carefully align and slide the TC-OAV081 module into its designated single slot on the Experion control chassis backplane, ensuring connector pins seat smoothly without bending.
- Wiring Termination: Connect field actuator control wiring to the corresponding 20-position terminal block (TC-TBNH), ensuring correct loop polarity for voltage or current configurations.
- Verification: Verify system configuration parameters, channel scaling, and output loop integrity within the Experion engineering station prior to startup.
- Initialization: Restore power to the rack and observe the front-panel diagnostic indicators to confirm proper module communication, hardware health, and active signal generation.
❓ Frequently Asked Questions (Q&A)
Q: What control systems are compatible with the Honeywell TC-OAV081?
A: It is natively designed for use with Honeywell Experion C300 controllers and related Process Knowledge System (PKS) input/output configurations.
Q: What signal types can this module output?
A: It supports both voltage outputs (up to ±10.4V) and current outputs (such as 4-20 mA or 0-20 mA loops) across its 8 independent channels.
Q: Does the module feature built-in protection against wiring faults?
A: Yes, it includes electronic short-circuit protection (typically limited to 21 mA or less) and overvoltage protection to safeguard circuitry from external miswiring.
Q: What troubleshooting steps should be taken if an output channel stops responding?
A: Power down the slot safely, check the module backplane seating, inspect the terminal block wiring for loose connections or ground faults, and verify channel configuration tags via the software interface.
🔥 Recommended Alternative Honeywell I/O Series & Models
- Honeywell TC-PAOH01 Analog Output Module (Standard FTA-based)
- Honeywell TC-IXR061 High-Level Analog Input Module
- Honeywell TC-ODD321 32-Channel Digital Output Module
- Honeywell TC-IDD321 32-Channel Digital Input Module
- Honeywell CC-PAOH01 C300 Analog Output Card
- Honeywell 8C-PAOHA1 Experion Series I/O
- Honeywell Experion C300 Controller Processor Module
- Honeywell Series 8 Power Distribution Assemblies
- Honeywell FSC (Safety Manager) Output Modules
- Honeywell PlantCruise Process Control Hardware
