Description
The Honeywell TK-FPCXX2 is a robust, industrial-grade AC Input Power Supply module engineered specifically for Honeywell distributed control systems (DCS) and automation platforms, such as Experion PKS and C200/Series control rack environments. Designed to deliver stable and regulated multi-rail DC power to system backplanes, processor modules, and I/O sub-assemblies, this power supply features high operational efficiency, wide voltage selection ranges, and built-in protection circuits to ensure continuous uptime in demanding industrial facilities.
📊 Product Datasheet & Technical Parameters
| Parameter Name | Technical Specification Value |
| Model Designation | Honeywell TK-FPCXX2 |
| Manufacturer | Honeywell Process Solutions |
| Module Category | AC-to-DC Industrial Power Supply Module |
| Input Voltage Range | 85 to 132 VAC or 170 to 265 VAC (Selectable / 120/240 VAC nominal) |
| Frequency Range | 47 to 63 Hz |
| Total Power Output | Up to 70W to 100W maximum (application dependent @ 60°C) |
| DC Output Rails | Primary 5.1 VDC, 24 VDC, and auxiliary logic rails |
| Protection Features | Overvoltage, overcurrent, short-circuit protection, and internal fuse protection |
| Operating Temperature Range | 0°C to +60°C (Tamb Max = 60°C) |
| Hazardous Certifications | Class I, Div 2, Groups A, B, C, D |
| Dimensions & Weight | Approximately 11.2 cm x 14.5 cm x 14.0 cm / ~1.1 kg |
| Origin of Manufacture | United States / USA |
⚙️ Product Usage Instructions
🔌 Secure Chassis Installation: Ensure the system rack is completely de-energized before sliding and firmly securing the TK-FPCXX2 power supply module into its designated power slot on the controller chassis backplane.
🔗 AC Mains Wiring Connection: Connect incoming AC line, neutral, and earth ground wires securely to the designated input terminals, matching the voltage selection switch or jumper settings to your facility’s power supply.
⚡ Voltage and Diagnostic Verification: Energize the system input and check front-panel diagnostic indicators or backplane test points to confirm stable multi-rail DC output delivery before powering connected controller cards.
💻 Thermal Management: Maintain adequate vertical and horizontal clearance around the module chassis to allow efficient natural convection cooling and prevent premature thermal derating.
❓ Frequently Asked Questions (Q&A)
❓ Q1: What is the primary function of the Honeywell TK-FPCXX2 module?
✅ A1: It serves as a dedicated AC input power supply module designed to convert standard plant AC power into regulated DC voltage rails for Honeywell controller racks and backplanes.
❓ Q2: What AC input voltages are supported by this power supply?
✅ A2: It supports selectable input ranges of 85 to 132 VAC or 170 to 265 VAC, accommodating standard global industrial single-phase power distribution.
❓ Q3: Is the TK-FPCXX2 certified for use in hazardous industrial environments?
✅ A3: Yes, it carries hazardous location ratings including Class I, Div 2, making it suitable for deployment in volatile chemical, oil, and gas process areas.
🔍 Recommended Alternative Series and Models
- Honeywell TK-FPCXX1 (Alternative DC/AC Power Supply Variant)
- Honeywell CC-PWRN01 (Experion Series C Non-Redundant Power Supply Module)
- Honeywell CC-PWRR01 (Experion Series C Redundant Power Supply Module)
- Honeywell 51450991-001 (ControlEdge HC900 AC Power Supply Module)
- Honeywell FC-TPS-0920 (Safety Manager Power Supply Module)
- Honeywell TC-CCR012 (Redundant ControlNet Interface Module)
- Honeywell CC-TDIL11 (Series C 32-Channel Redundant Digital Input IOTA)
- Honeywell CC-TDOB11 (Series C 32-Channel Redundant Digital Output IOTA)
- Honeywell ControlEdge C300 Controller Unit
- Honeywell Experion Process Knowledge System (PKS) Hardware Architecture
