Description
⚙️ Product Specifications
- Brand: Horner APG (GE Fanuc / GE Compatible)
- Model: HE700GEN200C (HE700GEN200 Series)
- Series: Series 90-70 / VME Control Architecture
- Product Name: uGENI VME / Genius Network Interface Module
- Origin: USA / Austria
- Status State: Obsolete / Refurbished
- Dimensions: Standard Series 90-70 / VME single-slot module format (approx. 6.5″ x 5″ x 1.5″)
- Weight: Approx. 0.5 kg
- Country of Origin: USA / Europe
- Power Rating: Low Voltage Backplane Powered (VME Bus / Logic DC)
📖 Operation Guidelines & Usage Instructions
The Horner APG HE700GEN200C is a uGENI VME interface module engineered to integrate GE Fanuc Series 90-70 PLC systems and VME bus architectures with Genius I/O networks. It handles high-speed data exchange and acts as a communication gateway. Ensure all rack power and external Genius bus connections are completely de-energized, locked out, and tagged before handling or servicing the unit. Always wear a grounded electrostatic discharge (ESD) wrist strap and configure onboard hardware DIP switches correctly before inserting the module into the rack. Routine maintenance includes checking front-panel screw-type connector terminals for secure torque and inspecting network termination resistors.
RuiMingSheng+ 2
⚡ Power-Up / Power-Down Sequence
- Power-Up Sequence: Verify that the HE700GEN200C module is properly aligned and firmly seated into its designated VME/Series 90-70 rack slot, and ensure all front-panel Genius bus wiring (Serial 1, Serial 2, and Shield) is securely attached. Switch on the main rack power supply. Observe the module’s initialization and diagnostic indicators to confirm successful bus communication.
- Power-Down Sequence: Halt active PLC scanning or network polling via the programming software if necessary. Turn off the main rack power distribution unit to remove all backplane voltage, allow internal circuits to fully discharge, and carefully extract the module.
❓ Frequently Asked Questions (Q&A)
- Q: What is the primary function of the HE700GEN200C module?
A: It serves as a VME interface and Genius Bus communication module, allowing GE Fanuc VME-based control systems to connect and exchange real-time data with industrial Genius I/O networks.
RuiMingSheng
- Q: How is the module configured for network operation?
A: The module relies on onboard hardware configuration DIP switches combined with software addressing set through the VME CPU environment.
RuiMingSheng
🚀 Recommended GE / Horner Models
- HE700GEN100
- IC697CPU788
- IC697BEM733
- IC697PWR711
- IC697CHS750
- IC693CPU374
- DS200TCQAG1A
- DS200TCCAG1A
- IS200STAIH1A
- IS200TRLYH1B
