Description
⚙️ Product Overview
The HYDRIL AA5160008100 Analog Board, also identified with AA5170008100, is a specialized electronic PCB used in Hydril control and subsea equipment. The board is identified as Revision A in available listings and is marked as a Hydril analog board manufactured in the USA.
📋 Product Datasheet
| Parameter | Specification |
|---|---|
| Brand | HYDRIL |
| Model | AA5160008100 |
| Series | Hydril Control / Subsea Electronics |
| Product Name | Analog Board |
| Part Number | AA5160008100 |
| Alternate Part Number | AA5170008100 |
| Revision | Rev. A |
| Board Type | Analog PCB / Control Board |
| Country of Origin | United States |
| Weight | Approx. 170 g |
🔧 Key Features
- Hydril analog interface/control PCB
- Part number AA5160008100
- Alternate identification AA5170008100
- Revision A board configuration
- Designed for Hydril electronic control equipment
- Suitable for industrial and subsea automation applications
- Compact PCB construction
- Useful as a maintenance or replacement spare
- Original board markings can be used for installation verification
⚓ Application & System Integration
The AA5160008100 is a system-specific analog board rather than a general-purpose analog I/O module. It should be installed only in equipment designed for this particular Hydril board configuration.
Hydril systems can contain several dedicated boards, including power supply, network processor, extender, solenoid driver, current monitor, analog interface, and backplane assemblies. The analog board therefore works as part of a larger electronic control architecture rather than as an independent controller.
Before installation, compare the PCB identification, revision, connector layout, mounting arrangement, and associated system documentation with the existing board.
🛠️ Inspection & Maintenance
When receiving a replacement board, inspect the PCB for bent connectors, damaged terminals, corrosion, cracked components, or signs of moisture exposure. This is especially important for equipment used in offshore or subsea environments.
Check all connector contacts before installation and make sure the mating connectors are clean and correctly keyed. Avoid handling exposed PCB contacts directly and use appropriate ESD protection during installation.
If the board is being installed into an operating control system, record the original board position and cable connections before removal.
⚠️ Replacement Considerations
The AA5160008100 and AA5170008100 identifiers appear together in current listings, so both markings should be retained when identifying the replacement. Available listings also show different condition states for this part, including used and new/open-box examples.
Do not substitute another Hydril analog or interface board simply because the board appearance is similar. Verify the exact part number and revision against the equipment documentation.
❓ Frequently Asked Questions
Q1: What is the HYDRIL AA5160008100?
A1: It is a Hydril analog PCB used as part of a dedicated electronic control system.
Q2: What is the alternate part number?
A2: The board is also identified as AA5170008100 in available product listings.
Q3: What revision is this board?
A3: The referenced board is identified as Revision A.
Q4: Is AA5160008100 a standalone PLC analog input module?
A4: No. It should be treated as a Hydril system-specific analog board rather than a universal PLC analog input card.
Q5: What should I verify before ordering?
A5: Check the complete part number, alternate number, PCB revision, connector configuration, existing equipment model, and board position.
Q6: What is the approximate board weight?
A6: A current product listing specifies approximately 170 g for the board.
⭐ Related HYDRIL Models & Boards
- HYDRIL AA5160000700 Network Node Processor Board
- HYDRIL AA5160000800 Subsea Utility Board
- HYDRIL AA5160001500 Motherboard
- HYDRIL AA5160002300 Pod Personality Board
- HYDRIL AA5160003400 Subsea A/B Relay Control Board
- HYDRIL AA5160004400 Power Supply PCB
- HYDRIL AA5160006100 Extender Board
- HYDRIL AA5160006200 Surface Extender Board
- HYDRIL AA5160010200 Solenoid Driver Board
- HYDRIL AA5160014600 Analog Interface Board
📦 Replacement Recommendation
For maintenance inventory or direct replacement, match HYDRIL AA5160008100 / AA5170008100 Rev. A against the original PCB markings before installation. The complete board identification is more reliable than appearance alone when selecting a spare for Hydril control equipment.
