Description
The ICS Triplex T8160 is a critical component of the Trusted™ High Availability (HA) and Safety Instrumented System (SIS). As a specialized interface and power distribution module, it is designed to maintain the integrity of safety-critical operations in industrial plants. The T8160 provides a stable communication and power link between the Trusted controller and various input/output modules, ensuring fault-tolerant operation and preventing system-wide failures in the event of individual component glitches.
For more reliable safety system components, visit the ICS TRIPLEX T8160 product selection.
Technical Datasheet
Product Identification
- Model Number: T8160
- Product Series: ICS Triplex Trusted™
- Product Type: Field Interface / Power Distribution Module
Physical Characteristics
- Dimensions: 265 mm x 30 mm x 195 mm
- Weight: 1.2 kg
- Country of Origin: United Kingdom / USA
Operational Specifications
- Input Supply Voltage: 24V DC Nominal (Dual Redundant Inputs)
- Power Dissipation: 10 Watts (Average)
- Isolation Voltage: 50V (Continuous)
- Operating Humidity: 5% to 95% non-condensing
ICS TRIPLEX T8160
ICS TRIPLEX T8160
ICS TRIPLEX T8160
Application Fields
The T8160 is deployed in environments where downtime or failure could result in catastrophic consequences:
- Emergency Shutdown (ESD) Systems: Providing the fail-safe infrastructure for refinery and chemical plant shutdowns.
- Fire and Gas (F&G) Detection: Monitoring and controlling safety-critical sensors across large industrial sites.
- Turbine Control: Managing the high-speed safety parameters of power generation equipment.
- Subsea Control Systems: Enabling reliable communication and power distribution for underwater oil and gas extraction.
Product Usage Instructions
- System Integration: The T8160 must be installed into a compatible Trusted™ controller chassis. Ensure the backplane connectors are clear of debris before insertion.
- Redundant Power Hookup: To maintain the Triple Modular Redundant (TMR) status, connect both independent 24V DC power feeds to the module’s power input terminals.
- Communication Configuration: Use the Trusted™ Toolset software to define the module’s role within the system architecture. Confirm that the module firmware is compatible with the main T8001/T8403 processor versions.
- Signal Testing: After installation, verify the “Health” LED status. A steady green light indicates that the module is correctly receiving power and participating in the system’s voting logic.
- Hot-Swap Procedure: While the T8160 supports hot-swapping, ensure that the system’s redundancy is active before removing a module to prevent an inadvertent system trip.
Common Questions & Answers
Q: What does it mean that the T8160 is part of a “TMR” system? A: TMR stands for Triple Modular Redundancy. It means the module operates within a system that uses three parallel channels to process data. If one channel fails, the other two “outvote” it, allowing the process to continue safely without interruption.
Q: Can the T8160 be used with third-party PLC systems? A: No, the T8160 is a proprietary component designed specifically for the ICS Triplex Trusted™ architecture. It must be used with its designated controllers and backplanes.
Q: What is the typical lifespan of this module? A: When operated within its specified temperature and power parameters, these modules are designed for a service life exceeding 15 years, consistent with industrial safety standards.
Similar Model Recommendations
- ICS Triplex T8403
- ICS Triplex T8431
- ICS Triplex T8110B
- ICS Triplex T8311
- ICS Triplex T8451
