Description
⚙️ Product Introduction
The IDEC IZUMI PF2-2H4R FA-2 Program Loader Unit is a programming and control accessory associated with the IDEC FA-2 programmable controller family. The unit is identified as a PF2-2H4R and is specified for 9 VDC, 350 mA operation.
The FA-2 Program Loader is intended for transferring and managing control programs in compatible FA-series programmable controller applications. It is useful for maintenance, program replacement, commissioning, and servicing of legacy industrial automation equipment.
The listed identification confirms IDEC as the brand, FA-2 as the model/family, and PF2-2H4R as the MPN. The referenced unit is also identified with Japan as its country of origin.
📋 Product Datasheet
| Parameter | Specification |
|---|---|
| Brand | IDEC IZUMI |
| Model | FA-2 |
| Series | FA Series |
| Product Name | Program Loader Unit |
| MPN | PF2-2H4R |
| Product Type | PLC Program Loader / Programming Unit |
| Country of Origin | Japan |
| Condition / Status | New / Open Box |
| Dimensions | Compact handheld unit; verify actual dimensions before installation |
| Power | 9 VDC, 350 mA |
🔧 Product Features
🔹 FA-2 Programming Support
Designed for programming and maintenance work with compatible IDEC FA-series controller systems.
🔹 Dedicated Program Loader
Provides a practical interface for transferring or managing controller programs during commissioning and servicing.
🔹 9 VDC Operation
The specified electrical requirement is 9 VDC at 350 mA, making correct power supply selection important.
🔹 Legacy System Maintenance
Particularly useful when maintaining older FA-series automation equipment where original programming accessories are required.
🔹 Compact Service Equipment
Its dedicated loader format makes it suitable for technician use during troubleshooting, program backup, and controller replacement.
🛠️ Installation & Maintenance
🔸 Verify the PF2-2H4R part number before connecting the unit.
🔸 Confirm the available power source is suitable for 9 VDC / 350 mA operation.
🔸 Inspect the connector, cable, housing, and switches before use.
🔸 Back up the existing controller program whenever possible before making programming changes.
🔸 Avoid disconnecting the programming connection while data is being transferred.
🔸 Store the loader in a clean, dry environment and protect it from electrostatic discharge.
❓ Frequently Asked Questions
Q: What is the IDEC PF2-2H4R?
A: It is an IDEC FA-2 Program Loader Unit used for programming and maintenance of compatible FA-series programmable controller systems.
Q: What is the model number?
A: The model is FA-2, while PF2-2H4R is the specific MPN/part number.
Q: What power does the PF2-2H4R require?
A: The specified rating is 9 VDC, 350 mA.
Q: Is this a PLC CPU?
A: No. It is a dedicated program loader/programming unit, rather than the primary PLC CPU.
Q: Can it be used with every IDEC PLC?
A: No. Compatibility depends on the controller family and programming interface. The FA-2 designation should be matched with the target controller before use.
Q: What should I check before purchasing?
A: Confirm the complete PF2-2H4R part number, FA-2 compatibility, connector configuration, required power supply, and the programming requirements of your controller.
Q: Is the PF2-2H4R suitable for legacy equipment?
A: Yes. A dedicated FA-2 program loader can be valuable when servicing older automation systems that still depend on their original programming hardware.
📦 Recommended IDEC Models
- IDEC PF2-CPU5M – FA-2 CPU Module
- IDEC PF2-2H4RE – FA-2 Program Loader
- IDEC PF2-2H4REU – FA-2 Program Loader
- IDEC FC4A-C24R2 – MicroSmart PLC CPU
- IDEC FC4A-C16R2 – MicroSmart PLC CPU
- IDEC FC5A-C24R2C – MicroSmart PLC CPU
- IDEC FC6A-C16R1CE – MicroSmart PLC CPU
- IDEC FC6A-C40P1CE – MicroSmart PLC CPU
- IDEC FT1A-H40RSA – SmartAXIS PLC/HMI
- IDEC PFJ-T081U – PLC Relay Output Module
⚠️ Compatibility Note: For a replacement or retrofit, always match the complete part number and controller family rather than relying only on the general IDEC FA-series designation.
