Description
Product Specifications
| Attribute | Specification |
|---|---|
| Model Number | 06-220012 (Main PCB) / 06-236284-001 (Display) |
| Revision | Rev BC (Main Board) |
| Product Type | Control Module with Integrated Display Interface |
| System Compatibility | Fenwal Fire Suppression / Gas Ignition Systems |
| Power Supply | 24 VAC / DC Logic |
| Dimensions | 210 mm x 145 mm (Main Board) |
| Weight | 0.52 kg (Combined) |
| Origin | USA |
| Display Type | Alphanumeric Status Display |
Application Fields
This Kidde-Fenwal control set is a critical component for specialized fire protection and burner management. It is primarily utilized in:
- Industrial Fire Suppression: Controlling FM-200 or CO2 release systems.
- Commercial Cooking Protection: Managing specialized fire extinguishing for restaurant hoods.
- Gas Ignition Control: High-reliability spark ignition and flame sensing for industrial ovens.
- Marine Systems: Protecting engine rooms and machinery spaces on commercial vessels.
Product Instructions
- System Assembly: Connect the 06-236284-001 Display Unit to the 06-220012 Main PCB using the dedicated multi-pin interface cable. Ensure the connection is secure before mounting into the enclosure.
- Mounting: Install the main board on its non-conductive standoffs to prevent short circuits against the metal cabinet. The display unit should be aligned with the front panel window for visibility.
- Wiring Configuration: Connect detection loops (heat/smoke) and notification appliances (alarms/strobes) to the terminal blocks on the main board. Always refer to the system wiring diagram for specific terminal assignments.
- Testing: Upon power-up, the display unit will show system status. Perform a “Lamp Test” and “Walk Test” to ensure all connected peripherals and the LCD segments are functioning correctly.
Product Q&A
Q1: Can the 06-220012 board operate without the 06-236284-001 display unit? A1: While the main board handles the control logic, the display unit is essential for user interface, programming, and viewing diagnostic fault codes. It is recommended to use them as a matched set for full functionality.
Q2: What should I check if the display unit shows “System Trouble”? A2: A “System Trouble” message is a general alert. Check the display for specific fault codes related to battery health, ground faults, or open detection circuits.
Q3: Is the Rev BC board backward compatible with older revisions? A3: Generally, Rev BC includes hardware improvements that maintain backward compatibility. However, you should verify that the firmware version is compatible with your existing sensors and release solenoids.
Related Product Models
- KIDDE-FENWAL 06-118502-001
- KIDDE-FENWAL 06-129892-001
- KIDDE-FENWAL 05-318351-001
- KIDDE-FENWAL 35-605606-111
- KIDDE-FENWAL 29-116771-001
