Description
The Kongsberg 8100222 is an MSI-12 (Multi-Sensor Interface) module engineered for maritime automation systems, including the K-Chief series. It serves as a vital hardware bridge, facilitating seamless data exchange between physical shipboard sensors and the centralized control and monitoring network. This module ensures accurate signal processing for mission-critical vessel equipment.
Technical Parameters
- Model: MSI-12
- Part Number: 8100222
- Component Type: Multi-Sensor I/O Interface
- System Compatibility: Kongsberg K-Chief and legacy maritime architectures
- Origin: Norway
- Weight: 0.5 kg
Application Areas
- Engine room instrumentation and monitoring
- Fluid management (tank level and pressure sensing)
- Pump and valve control automation
- Centralized alarm and safety signaling
Product Usage Instructions
- Safety Procedures: De-energize the control cabinet and backplane prior to installation to prevent electrical damage to the module or system bus.
- Installation: Carefully slide the module into the designated slot on the K-Chief rack, ensuring the rear connector is fully seated against the backplane.
- Configuration: Use the designated engineering interface to map the physical I/O channels to the specific system software tags.
- Diagnostic Check: After power-up, verify that the status LEDs indicate normal synchronization; a solid status light confirms successful communication with the central controller.
Product Description
The MSI-12 module acts as a high-reliability gateway for diverse field inputs, such as analog sensors and digital status contacts. Its design is optimized for low-latency data acquisition, which is essential for maritime stability. The hardware is encased in a robust chassis to withstand the operational demands of engine room environments, providing long-term reliability for complex vessel control loops.
Protection & Environmental Parameters
- IP Rating: Intended for integration within protected, cabinet-enclosed control systems.
- Corrosion Resistance: High-durability conformal coating applied to internal circuitry to resist saline moisture and atmospheric humidity.
- Operating Temperature: 0°C to +55°C.
- Storage Temperature: -25°C to +75°C.
- Humidity: 5% to 95% relative humidity, non-condensing.
Mechanical & EMC Standards
- Vibration Resistance: Designed to withstand continuous operational vibrations found in ship propulsion and engine spaces.
- EMC Compliance: Features integrated filtering to maintain high signal integrity and noise immunity in environments with significant electromagnetic interference.
Frequently Asked Questions
- Can this module be hot-swapped while the system is powered? No; it is strongly advised to power down the rack to prevent electrical transients or bus errors.
- What does a blinking status LED usually indicate? A blinking LED often signifies a communication fault or a mismatch between the hardware configuration and the system software.
- Is this compatible with newer K-Chief platforms? This module is typically reserved for legacy systems; compatibility with current-generation platforms should be verified against your specific system hardware revision.
- What is the most common cause of signal loss? Signal loss is often caused by oxidation on the backplane connector or a loose terminal block connection; always check physical connections before replacing the module.
