Description
Technical Parameters
- Manufacturer: Meggitt (Vibro-Meter)
- Model Number: 200-530-025-014
- Component Type: Printed Circuit Board (PCB)
- System Series: VM600 / MPC4 Machinery Protection System
- Function: Signal conditioning and processing for vibration monitoring
- Input Compatibility: Piezoelectric accelerometers, proximity probes, and velocity sensors
- Signal Output: Raw buffered outputs and processed analog signals
- Communication: VMEbus backplane compatibility for modular integration
Product Datasheet
| Specification | Details |
|---|---|
| Model | 200-530-025-014 |
| Origin | Switzerland |
| Dimensions | 16.0 cm x 10.0 cm x 2.0 cm |
| Weight | 0.32 kg |
| Operating Voltage | +5V / ±12V DC (via Backplane) |
| Measurement Range | Up to 10 kHz (Configurable) |
| Operating Temp | -25°C to +65°C |
| Storage Temp | -40°C to +85°C |
Application Fields
The 200-530-025-014 board is a critical element in high-stakes machinery protection:
- Power Generation: Monitoring shaft vibration and displacement in gas and steam turbines.
- Hydroelectric Plants: Vibration analysis for large water turbines and generators.
- Oil & Gas: Protection of high-speed centrifugal compressors and pumps.
- Aerospace Testing: Ground-based monitoring of engine vibration and structural integrity.
Product Instructions
- System Power: Turn off the VM600 rack power before inserting or extracting the PCB to prevent surge damage.
- ESD Handling: Wear an anti-static wrist strap. Touch only the front panel or the edges of the board.
- Installation: Slide the board into the designated rack slot, ensuring the backplane connectors align perfectly before applying pressure.
- Hardware Configuration: Check onboard jumpers or dip switches to match the sensor type (e.g., current-based vs. voltage-based).
- Software Link: Once installed, use the Vibro-Sight software to configure the alarm setpoints and processing parameters.
Q&A
Q1: Is this board part of the MPC4 machinery protection card? A1: Yes, this specific PCB assembly is often a sub-component or a specific revision of the hardware used within the VM600 MPC4 processing modules.
Q2: Can I use this board for 4-20mA sensor inputs? A2: Yes, the board is designed to interface with various signal types, but the input must be properly configured via the module settings to interpret the 4-20mA loop correctly.
Q3: What does a “DIAG” LED light indicate on the front panel? A3: A flashing or solid red “DIAG” LED typically indicates a self-test failure, internal hardware fault, or a communication break with the VMEbus.
Recommended Similar Models
- Meggitt 200-510-076-114
- Meggitt 200-560-000-016
- Meggitt 600-003-000-011
- Meggitt 200-530-025-011
- Meggitt 100-510-000-111
