Description
Product Specifications
| Attribute | Specification |
|---|---|
| Model Number | 200-530-025-014 |
| Brand | Meggitt / Vibro-Meter |
| Product Type | Monitoring System PCB / Interface Board |
| Compatibility | VM600 series / MPC4 Machinery Protection Cards |
| Input Channels | Dynamic Vibration / Proximity Probe Inputs |
| Dimensions | 185 mm x 120 mm x 18 mm |
| Weight | 0.24 kg |
| Origin | Switzerland |
| Operating Temp | -25°C to +65°C |
Application Fields
The Meggitt 200-530-025-014 is a high-reliability component within the Vibro-Meter VM600 machinery protection system. It is extensively used in:
- Gas & Steam Turbines: Continuous vibration monitoring for bearing health and rotor dynamics.
- Hydroelectric Generators: Tracking shaft vibration and air-gap measurements.
- Large Pumps & Compressors: Providing early warning for mechanical imbalances or misalignment.
- Oil & Gas Infrastructure: Critical asset protection for offshore platforms and refineries.
- Nuclear Power: Specialized monitoring for primary and secondary circuit vibration.
Product Instructions
- Chassis Mounting: This board is typically used as a sub-module or interface board within a VM600 rack. Ensure the rack power is switched off before inserting the board into its designated slot.
- Transducer Connection: Connect vibration sensors (accelerometers or velocity transducers) or proximity probes to the associated terminal base. The 200-530-025-014 processes these raw signals into conditioned data for the protection system.
- Grounding: Proper shielding and grounding are essential for high-frequency vibration signals. Ensure the board’s mounting screws are tightened to establish a solid common ground with the system rack.
- Signal Verification: Use the Vibro-Meter configuration software (such as MPS) to verify that the board is correctly identified by the CPU and that signal levels are within the expected millivolt (mV) range for the connected sensors.
Product Q&A
Q1: What is the relationship between Meggitt and Vibro-Meter? A1: Vibro-Meter is a premium brand under the Meggitt Group (now part of Parker Hannifin). The 200-530-025-014 part number is the standard engineering code for this specific Vibro-Meter circuit board.
Q2: Can this board trigger a machinery trip? A2: While this board handles signal conditioning and interface logic, the actual “Trip” or “Alarm” decision is typically executed by the MPC4 (Machinery Protection Card) or the system CPU based on the data processed by this PCB.
Q3: How do I handle a “Sensor OK” fault related to this board? A3: First, check the cabling between the sensor and this interface board. If the wiring is intact, the fault may indicate an issue with the board’s internal power supply to the transducer (typically -24V for proximity probes).
Related Product Models
- MEGGITT 200-510-071-113
- MEGGITT VM600 MPC4
- MEGGITT IOC4T 200-566-000-012
- MEGGITT 200-560-000-016
- MEGGITT CPUM 200-595-071-111
