Description
Product Overview
The ORBOTECH MVC-FG 0355790 A is an equipment-specific digital image acquisition board associated with Orbotech inspection and vision systems. Public industrial listings identify the MVC-FG 0355790 series as a Digital Image Acquisition Card, while other spare-parts catalogs list the exact 0355790 A board as an ORBOTECH PCB assembly.
The MVC-FG designation and its image-acquisition classification indicate that the board is used within a machine-vision or inspection architecture, where image data must be captured and transferred to the system’s processing electronics.
The exact camera interface, acquisition format, supported image sensor, bus architecture and electrical specifications are not sufficiently documented in reliable public OEM material. Those parameters should therefore be verified from the equipment documentation or the actual board before installation.
Key Features
- Manufacturer: ORBOTECH
- Part Number: MVC-FG 0355790 A
- Product Type: Digital Image Acquisition Board
- Application: Industrial machine vision / inspection equipment
- Equipment-specific PCB assembly
- Designed for image acquisition within a vision system
- Suitable for maintenance and replacement of legacy equipment
- Revision-specific hardware configuration
Technical Specifications
| Parameter | Specification |
|---|---|
| Manufacturer | ORBOTECH |
| Model | MVC-FG |
| Part Number | 0355790 A |
| Product Type | Digital Image Acquisition Card / PCB |
| Application | Machine Vision / Inspection Equipment |
| Function | Digital image acquisition |
| Camera Interface | Not reliably documented |
| Image Resolution | Not reliably documented |
| Image Format | Not reliably documented |
| Host Interface | Not reliably documented |
| Supply Voltage | Not reliably documented |
| Dimensions | Not reliably documented |
| Operating Temperature | Not reliably documented |
| Revision | A |
| Condition | Used |
The public evidence supports the digital-image-acquisition classification, but does not provide enough reliable documentation to state specific resolution, frame rate, camera interface, voltage or connector pinout.
Functional Description
The MVC-FG board is part of the image-processing chain used in Orbotech inspection equipment.
In a typical vision architecture, the acquisition board sits between the imaging device and the system’s processing computer. Its job is to receive image information from the imaging subsystem and make that data available to the host processing system for inspection, measurement or defect analysis.
The actual architecture of a particular Orbotech tool can vary, so the board should not be treated as a universal frame grabber without confirming the original equipment configuration.
Typical Applications
The MVC-FG 0355790 A can be used as a replacement component in legacy Orbotech machine-vision and inspection equipment.
Typical applications may include:
- Automated optical inspection
- Industrial machine vision
- PCB and electronic-component inspection
- Precision image acquisition
- Defect detection systems
- Pattern and feature inspection
- Legacy Orbotech equipment maintenance
The 0355790 series is repeatedly listed among Orbotech electronic and vision-system spare parts.
Installation & Configuration Guide
1. Verify the Board
Before installation, confirm the complete identification:
ORBOTECH MVC-FG 0355790 A
Do not rely only on the MVC-FG designation because the market also contains 0355790 B and C versions.
2. Compare the Original Board
Check:
- PCB part number
- Revision
- Connector arrangement
- Jumper or switch settings
- Installed components
- Board position
- Cable connections
3. Record the Existing Configuration
Take photographs and record cable locations before removing the original board. This is particularly important for older vision systems where configuration information may not be readily available.
4. Follow ESD Procedures
Use appropriate ESD protection when handling the board. Avoid touching connector contacts and exposed electronic components.
5. Install the Board
Insert the board into the correct slot or mounting position without forcing the connectors. Verify that all cables are fully seated.
6. Verify Image Acquisition
After installation, check:
- System recognition
- Camera communication
- Image acquisition
- Image quality
- Inspection software operation
- System alarms
- Trigger and synchronization behavior
The system should be fully verified before being returned to production.
Maintenance & Inspection
For spare inventory, store the board in an antistatic bag in a clean, dry environment.
For installed equipment, inspect the board for:
- Dust contamination
- Oxidation
- Connector damage
- Bent pins
- Burn marks
- Discolored components
- Cracked solder joints
- Loose cables
- Thermal damage
If image acquisition becomes intermittent, inspect the camera cable, connectors, trigger signals and host-side hardware before replacing the acquisition board.
Troubleshooting
No image is acquired
Check board seating, camera connections, trigger signals and system configuration.
Image acquisition is intermittent
Inspect connectors and cables for loose contacts or oxidation. Check whether the fault follows the board or remains with the camera/channel.
Poor or abnormal image
Do not immediately assume the PCB is defective. Check the camera, optics, lighting, cables and acquisition settings first.
Board is not recognized
Verify the correct board revision and installation position. Check the host system and associated interface hardware.
Replacement board does not operate
Compare the original and replacement boards carefully, including revision, connector configuration and installed components.
Compatibility Notes
Revision matching is important for this product.
The market contains 0355790 A, 0355790 B, and 0355790 C versions. Their presence as separate listings indicates that the revision should be verified rather than assuming automatic interchangeability.
Before purchasing a replacement, confirm:
- MVC-FG model
- 0355790 part number
- Revision letter
- PCB layout
- Connector arrangement
- Original Orbotech equipment model
- Existing software and hardware configuration
Product Identification
Brand: ORBOTECH
Model: MVC-FG 0355790 A
Product Type: Digital Image Acquisition Board
Application: Machine Vision / Inspection Equipment
Revision: A
Condition: Used
Recommended eBay SEO Title
ORBOTECH MVC-FG 0355790 A Digital Image Acquisition Board PCB Vision Inspection
Short Chinese Title
ORBOTECH MVC-FG 0355790 A | 数字图像采集板
Listing Note
This is a used ORBOTECH MVC-FG 0355790 A board intended for equipment maintenance and replacement. The exact camera interface, electrical ratings and system compatibility should be confirmed against the buyer’s existing board and equipment configuration before installation.
