Description
📌 Product Overview
The SAACKE HD 60 D2 is an electric servo motor designed for precision rotational actuation in SAACKE industrial and marine equipment. The unit is identified by part number 7-6965-525673 and is intended to provide controlled rotary movement for compatible mechanical and automation assemblies.
SAACKE equipment is widely associated with industrial and marine combustion systems, where electrically driven actuators can be used for controlled positioning and adjustment functions. The exact application of this motor should be verified against the equipment model, actuator assembly, and original motor identification before replacement.
The listed unit is identified as a SAACKE Drehantrieb HD 60 D2 and as a servo motor, with Germany listed as the country of origin.
⚙️ Main Features
- ⚙️ SAACKE HD 60 D2 rotary drive
- 🔄 Electric servo motor configuration
- 🎯 Designed for controlled rotational positioning
- 🏭 Suitable for industrial automation applications
- ⚓ Applicable to compatible marine equipment and machinery
- 🔧 Replacement-oriented design for maintenance applications
- 🏷️ Original identification: 7-6965-525673
- 🇩🇪 Country of origin listed as Germany
- 🔍 Exact motor electrical ratings should be verified from the nameplate before installation
📊 Technical Datasheet
| Parameter | Specification |
|---|---|
| Brand | SAACKE |
| Model | HD 60 D2 |
| Part Number / MPN | 7-6965-525673 |
| Product Type | Electric Servo Motor / Rotary Drive |
| German Designation | Drehantrieb |
| Drive Model | HD 60 D2 |
| Application | Industrial & Marine Automation |
| Country of Origin | Germany |
| Condition | Verify actual unit condition before installation |
| Electrical Ratings | Not specified — verify nameplate |
🏭 Typical Applications
The HD 60 D2 can be considered for compatible SAACKE equipment requiring electrically controlled rotary movement or positioning.
Potential application areas include:
- Marine boiler systems
- Industrial combustion equipment
- Burner-related actuator systems
- Boiler automation
- Fuel or air control mechanisms
- Industrial process equipment
- Marine automation spare-part replacement
The exact function depends on the original SAACKE equipment configuration. The motor should not be substituted solely on physical appearance.
🔌 System Integration
When replacing a SAACKE servo motor, compatibility should be checked at both the electrical and mechanical levels.
Important points include:
- Motor model and part number
- Supply voltage and frequency
- Motor current
- Rotation direction
- Mechanical coupling
- Shaft/interface dimensions
- Mounting arrangement
- Feedback or position-sensing arrangement, if applicable
- Controller or actuator compatibility
- Original equipment configuration
The complete motor nameplate should be recorded before installation. If the motor is part of a larger SAACKE actuator assembly, the actuator’s complete identification should also be checked.
🛠️ Installation Considerations
1. Verify the Part Number
Confirm HD 60 D2 / 7-6965-525673 against the existing motor and equipment documentation.
2. Check Mechanical Compatibility
Inspect the mounting points, shaft or coupling, fastening arrangement, and mechanical travel before installation.
3. Confirm Electrical Data
Do not energize the motor until the supply voltage, frequency, current requirements, and control method have been confirmed from the motor nameplate or equipment documentation.
4. Check Rotation and Position
Verify the required direction of rotation and the mechanical end positions. Incorrect configuration can cause the actuator to move beyond its intended operating range.
5. Inspect Connections
Check terminals, cables, connectors, and grounding before commissioning.
🔍 Maintenance & Troubleshooting
Motor does not start:
Check the controller output, power supply, wiring, connectors, and protection devices.
Motor runs in the wrong direction:
Verify the control configuration and motor wiring against the original equipment documentation.
Position is inaccurate:
Inspect the mechanical coupling and any associated feedback or position-control components.
Motor overheats:
Check for excessive mechanical load, restricted movement, incorrect electrical supply, or repeated operation outside the intended duty conditions.
Intermittent operation:
Inspect connectors, cables, terminals, and the associated control electronics for loose or damaged connections.
Mechanical noise:
Check the actuator linkage, coupling, mounting hardware, and driven mechanism for excessive resistance or misalignment.
❓ Common Questions & Answers
Q: What is the SAACKE HD 60 D2?
A: It is an electric servo motor / rotary drive identified as SAACKE HD 60 D2.
Q: What is the part number?
A: The listed MPN is 7-6965-525673.
Q: Is this a servo motor?
A: Yes. The available product identification specifies the type as a servo motor.
Q: Where is the HD 60 D2 manufactured?
A: The available product information lists Germany as the country of origin.
Q: Can the HD 60 D2 be used as a general-purpose servo motor?
A: It should not be treated as a universal servo motor. Compatibility with the original SAACKE actuator, controller, mechanical coupling, and electrical configuration should be confirmed first.
Q: Are the voltage and speed specifications available?
A: They are not reliably specified in the available identification information. The motor nameplate and original equipment documentation should be used to confirm these values.
Q: What should be checked before ordering?
A: Check the model HD 60 D2, MPN 7-6965-525673, nameplate information, mounting arrangement, coupling, electrical ratings, and the original SAACKE equipment model.
🔟 Recommended SAACKE Related Spare-Part Categories
- SAACKE burner actuator assemblies
- SAACKE rotary drives
- SAACKE servo motors
- SAACKE combustion-control actuators
- SAACKE burner control components
- SAACKE boiler automation components
- SAACKE fuel-control assemblies
- SAACKE air-control actuators
- SAACKE marine boiler automation spare parts
- SAACKE industrial combustion-system spare parts
📦 Spare-Part Replacement Notes
The SAACKE HD 60 D2 / 7-6965-525673 is best handled as an application-specific replacement component. Before commissioning, compare the complete motor identification with the original unit and verify electrical, mechanical, and control-system compatibility.
For critical marine or industrial equipment, keeping a correctly identified spare servo motor available can reduce maintenance downtime and simplify replacement during scheduled service.
